My Build Thread - Page 17 - Toyota Yaris Forums

1.5 · 08-02-2013, 02:27 PM

LOL heres the most recent update now lol

Hey Philip,

Sorry for the delay as our internet and phone lines were down.
The package should be packed up and shipping today or tomorrow with your shipping label.

Thank you again!

Jordan Adams
6382 Industry Way
Westminster, CA 92683
o 714.372.3622
e jordan@rotiform.com
w www.rotiform.com
Follow Rotiform on Facebook - http://www.facebook.com/rotiformwheels

1.5 · 08-03-2013, 09:57 AM

Picked up this UR 2pt Front strut bar from ToyotaBuzz since he's local to me. Looks barely used if at all. The bolts too look untouched.

Name: Strut.jpg
Views: 342
Size: 166.8 KB

Name: Strut.jpg
Views: 342
Size: 166.8 KB

Finally the centers are on their way back!!!

Name: centers.png
Views: 335
Size: 91.0 KB

1.5 · 08-09-2013, 11:56 AM

ok everyone get ready for the whorring... center faces are back and im stripping them down for paint now, hopefully done by next week. In the mean time I assembled one rear to mock up the whole setup.

Didnt break out the SLR so crappy cell pics only but on to the sex...

Final sizing is 16x10 ~+13-15
6.5" Barrels .5" Faces 3" Lips
Tires will be 205/40/16
All pics taken with fully loaded suspension

Name: 1.jpg
Views: 311
Size: 48.5 KB

TerenceCruz · 08-09-2013, 03:44 PM

Woaaaah, I can't wait to see them on man! Lookin good!

HANZO_187 · 08-09-2013, 09:28 PM

ooooooooooooh this is gonna be awesome!!!!! Excited to see this happen already! *GRINS*

1.5 · 08-12-2013, 11:35 AM

I am trying to get these center faces ready for paint, how do these mating surfaces look. Does it look like theyre shaved/stripped down enough to get a good seal? Anyone with experience sealing heads think these are good for a tight seal?

thanks

Name: sandedface1.jpg
Views: 274
Size: 88.7 KB

Name: sandedface1.jpg
Views: 274
Size: 88.7 KB

Name: sandedface2.jpg
Views: 291
Size: 76.0 KB

Name: sandedface3.jpg
Views: 277
Size: 68.6 KB

sasquatch · 08-12-2013, 02:27 PM

Yea those look fine, lay down some good silicone and you'll be good.

Make sure you use a new tube. Made the mistake of using a older one I had and they all leaked.

I barely scraped the old stuff off of one of dinoegg's and it sealed fine.

1.5 · 08-12-2013, 02:57 PM

ok cool lol, im extremely nervous that im going to get like leaks everywhere

sasquatch · 08-12-2013, 03:33 PM

Make sure you seal up where the barrel/face/lip meet on the inside(where it's hidden by the tire) and maybe the inside of the wheel itself a little. You'll be far more likely to get leaks from that not being sealed up well.

Didn't watch it all but this might help:

http://youtu.be/NxCwpc_ex7s

1.5 · 08-12-2013, 05:00 PM

im gonna finish the paint now that ive started that and then ill shave down the mating surfaces one more quick go around, make sure i get any overspray off as well and then ill start mounting them up

1.5 · 08-13-2013, 10:19 AM

Golddeenoh · 08-13-2013, 10:31 AM

well that is different, are you going to make the rest of the car a neon color as well or just leave the contrast with the current color and those rims?

1.5 · 08-13-2013, 11:06 AM

nah current color with those wheels.

ilikerice · 08-13-2013, 11:40 AM

OH GOD MY EYES!.. THEY BURN! WHY PHIL, WHY!

1.5 · 08-13-2013, 12:15 PM

too much Molly now all I like is fluorescent colors lol

cali yaris · 08-13-2013, 01:03 PM

I approve.

1.5 · 08-13-2013, 01:09 PM

Thanks Garm!!

TerenceCruz · 08-13-2013, 01:49 PM

I'm sure they'll look great, man! Can't wait to see them on!

08-02-2013, 02:27 PM	#289
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	LOL heres the most recent update now lol Hey Philip, Sorry for the delay as our internet and phone lines were down. The package should be packed up and shipping today or tomorrow with your shipping label. Thank you again! Jordan Adams 6382 Industry Way Westminster, CA 92683 o 714.372.3622 e jordan@rotiform.com w www.rotiform.com Follow Rotiform on Facebook - http://www.facebook.com/rotiformwheels __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

08-03-2013, 09:57 AM	#290
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	Picked up this UR 2pt Front strut bar from ToyotaBuzz since he's local to me. Looks barely used if at all. The bolts too look untouched. Finally the centers are on their way back!!! __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

08-09-2013, 11:56 AM	#291
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	ok everyone get ready for the whorring... center faces are back and im stripping them down for paint now, hopefully done by next week. In the mean time I assembled one rear to mock up the whole setup. Didnt break out the SLR so crappy cell pics only but on to the sex... Final sizing is 16x10 ~+13-15 6.5" Barrels .5" Faces 3" Lips Tires will be 205/40/16 All pics taken with fully loaded suspension __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

08-12-2013, 11:35 AM	#294
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	I am trying to get these center faces ready for paint, how do these mating surfaces look. Does it look like theyre shaved/stripped down enough to get a good seal? Anyone with experience sealing heads think these are good for a tight seal? thanks __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

08-12-2013, 02:57 PM	#296
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	ok cool lol, im extremely nervous that im going to get like leaks everywhere __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

08-09-2013, 03:44 PM	#292
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Woaaaah, I can't wait to see them on man! Lookin good!

08-09-2013, 09:28 PM	#293
HANZO_187 #CarFiend-HANZO188 View User's Garage Drives: 2011 Toyota Vios Join Date: Oct 2012 Location: Wintergarden, FL Posts: 208	ooooooooooooh this is gonna be awesome!!!!! Excited to see this happen already! GRINS

08-12-2013, 02:27 PM	#295
sasquatch Drives: 04.:R32, 87 Scirocco, 07 yaris Join Date: Apr 2009 Location: buffalo, NY Posts: 100	Yea those look fine, lay down some good silicone and you'll be good. Make sure you use a new tube. Made the mistake of using a older one I had and they all leaked. I barely scraped the old stuff off of one of dinoegg's and it sealed fine.

08-12-2013, 03:33 PM	#297
sasquatch Drives: 04.:R32, 87 Scirocco, 07 yaris Join Date: Apr 2009 Location: buffalo, NY Posts: 100	Make sure you seal up where the barrel/face/lip meet on the inside(where it's hidden by the tire) and maybe the inside of the wheel itself a little. You'll be far more likely to get leaks from that not being sealed up well. Didn't watch it all but this might help: http://youtu.be/NxCwpc_ex7s

08-12-2013, 05:00 PM	#298
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	im gonna finish the paint now that ive started that and then ill shave down the mating surfaces one more quick go around, make sure i get any overspray off as well and then ill start mounting them up __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

08-13-2013, 10:19 AM	#299
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	__________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

08-13-2013, 10:31 AM	#300
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	well that is different, are you going to make the rest of the car a neon color as well or just leave the contrast with the current color and those rims? __________________ mods:15''Drag DR21 w/Nitto NeoGen 205/50R15, Tanabe DF210 lowering springs 1.6/1.8, TRD Rear Sway Bar, Tanabe Front Sway Bar, Micro Image Short Throw Shift Kit (both in and under), 8.64lbs flywheel, F1 Stage 4 Clutch, AEM Cold Air Intake (Red), Megan Racing Header, DC Sports Axle Back Exhaust, Micro Image Crank Pulley, NST lite Alternator Pulley, ARP Manifold Stud Kit,Tanabe Front Strut Tower Brace, ScanGuage II, Micro Image Silicone Radiator Hose Kit (Red), NRG Carbon Fiber Shift Knob (round), 2009-2011 Toyota Yaris Liftback Foglight kit, NRG Grounding Kit (Red), Hella Horns(Red),CF Hood

08-13-2013, 11:06 AM	#301
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	nah current color with those wheels. __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

08-13-2013, 11:40 AM	#302
ilikerice Drives: 2010 black yaris Join Date: Oct 2010 Location: savannah, ga Posts: 2,868	OH GOD MY EYES!.. THEY BURN! WHY PHIL, WHY! __________________ -Derrick- "Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting."

08-13-2013, 12:15 PM	#303
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	too much Molly now all I like is fluorescent colors lol __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

08-13-2013, 01:03 PM	#304
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	I approve. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-13-2013, 01:09 PM	#305
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	Thanks Garm!! __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

08-13-2013, 01:49 PM	#306
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	I'm sure they'll look great, man! Can't wait to see them on!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Build thread! '08 Yaris Hatch	nimuntak	Photo-Video-Media Gallery	105	01-28-2014 02:28 PM
PETERPOOP's Turbo Build Thread.	PETERPOOP	Forced Induction Forum	114	02-08-2011 10:21 PM
XBG's Total Build and Update Thread	xbgod	Performance Modifications	10	11-18-2010 11:19 PM
The Official "Bambo the Yarisworld Traveler" thread (V2)	MAD DOG	Off-topic / Other Cars / Everything else Discussions	528	06-22-2009 03:58 PM