|
11-27-2014, 10:35 PM | #307 |
Drives: 08 BB LB Join Date: Dec 2008
Location: Maiden, NC
Posts: 785
|
Looks like the only choices for 4" are 7k or 9k and it looks like 6" goes up to 12.5k. All their rates are lbs/in not kg/mm. Edit: conversion rates for springs> http://coilover-store.com/expert-adv...kgmm-to-lbsin/
And like i said I'm running their 2.5" ID springs front and rear with no issues. But be advised with my 4" on the rear with the collars just a 1/4" fron the top of the perch my shock is almost bottoming out, like I have about 3/8" between bumpstop and body....
__________________
Too much of car culture is people taking things too seriously and not enjoying it for what it is. |
11-30-2014, 04:29 PM | #308 | |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
Quote:
|
|
11-30-2014, 05:11 PM | #309 |
やりすぎだ~
|
Forget the springs and put on those wheels now!
|
11-30-2014, 08:16 PM | #310 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
Hahaha Sugi! Man, I know. It's so tempting. I just feel like 3k is so soft, and I want to be patient and do the stiffer springs, camber shims and wheels all at once.. But.. I might just do that and worry about proper fitment with the stiffer springs and camber shims after they're on..
|
11-30-2014, 08:26 PM | #311 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
|
11-30-2014, 09:01 PM | #312 |
Minimalist
Drives: 07 silver sedan Join Date: Jun 2014
Location: Mississauga, GTA, Toronto, ON
Posts: 432
|
Shiny!
|
11-30-2014, 10:34 PM | #313 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
|
12-02-2014, 08:39 PM | #314 |
Drives: 2013 Yaris Join Date: Oct 2011
Location: Portland, OR
Posts: 914
|
Dooooooo iiiiiiiittt.........they look so good :D
|
12-03-2014, 11:51 PM | #315 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
|
12-04-2014, 12:06 AM | #316 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
http://www.ebay.com/itm/160794621607...%3AMEBIDX%3AIT
Anybody know if these would work for my wheels? |
12-04-2014, 12:08 AM | #317 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
Scratch that, I don't think they will. I need lugs that are conical I believe, short and open ended, and 12x1.5.
Last edited by TerenceCruz; 12-04-2014 at 12:19 AM. |
12-04-2014, 03:17 AM | #318 |
Drives: 2013 Yaris Join Date: Oct 2011
Location: Portland, OR
Posts: 914
|
Correct. If you want cheap, look for muteki tuner lugs. I've had a few sets of them but I am running Blox now. They're currently on my gf's car, and I can't complain about em'
http://www.ebay.com/itm/Muteki-Deep-...ca1d28&vxp=mtr |
12-04-2014, 11:44 AM | #319 |
Drives: Decepticon - Ravage Join Date: Nov 2008
Location: San Francisco
Posts: 1,462
|
Terence, once you get them wheels on, we are doing a photo shoot :)
__________________
Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274 |
12-04-2014, 03:17 PM | #320 | |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
Quote:
|
|
12-04-2014, 03:19 PM | #321 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
Yes that's for sure!! Haha. Can't wait. YarisWorld will be the first to know when they're on lol. Hopefully the 3k springs will be okay for a month or two. I just won't have people in the back until I get my swift springs lol.
|
12-04-2014, 04:08 PM | #322 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
|
12-05-2014, 03:56 AM | #323 |
Drives: Decepticon - Ravage Join Date: Nov 2008
Location: San Francisco
Posts: 1,462
|
Nothing externally has changed on my car since last photo shoot i did at Treasure Island. Just more gadgets inside. But yeah, we gotta hang out.
__________________
Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274 |
12-11-2014, 12:47 AM | #324 |
Drives: 2011 Toyota Yaris Join Date: Feb 2013
Location: Cali
Posts: 725
|
So lug nuts came in the mail, just had some questions.. These wheels "supposedly" have a conical seat for the lug nuts. So that is what I ordered. Short lugs with an open end in a conical. Is it normal for the lug not to sit like this on and behind the wheel? Or is the lug supposed to go all the way down to keep the wheel in place? Sorry if this is a noob question haha just want to make sure. Seems secure on top, but as you can see theres some room behind the face of the wheel. Thanks for the help guys.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2010 Vitz RS Modellista Completed Car | Vitz Rs Modellista | Photo-Video-Media Gallery | 38 | 11-18-2014 12:25 PM |
2012 Vitz from the 2011 Tokyo Auto Salon | CTScott | Third Gen Yaris General Discussion | 14 | 02-10-2011 08:06 AM |
Is UA-NCP13 1.5L Manual Trans a Vitz RS? | WesSunday | General Yaris / Vitz Discussion | 1 | 11-28-2010 10:47 AM |
Newly refreshed 2011 Toyota Corolla | Kal-El | Off-topic / Other Cars / Everything else Discussions | 23 | 11-27-2010 12:57 PM |
A German Yaris/Vitz/Echo ;) | we-to-11 | Photo-Video-Media Gallery | 5 | 06-27-2007 08:26 PM |