Can we do this? (aka The DIY Cruise Control Thread) - Page 19 - Toyota Yaris Forums

nickhjort · 06-05-2009, 11:20 PM

Hold on just a couple more days and I'll have that module installed. I just haven't had time to rip the dash again. I also have to rethink my clutch switch, the switch broke. That's what I get for going cheap :) Anyway, I'll prolly just buy the oem one. I'll put picks up when I'm done with all of this...

regal · 06-05-2009, 11:25 PM

Quote:

Originally Posted by nickhjort

Hold on just a couple more days and I'll have that module installed. I just haven't had time to rip the dash again. I also have to rethink my clutch switch, the switch broke. That's what I get for going cheap :) Anyway, I'll prolly just buy the oem one. I'll put picks up when I'm done with all of this...

but I understand an 09 has no need to rip apart the das?

PhilD424 · 06-06-2009, 11:30 AM

http://store.summitracing.com/partde...5&autoview=sku

CTScott · 06-06-2009, 12:45 PM

Quote:

Originally Posted by PhilD424

http://store.summitracing.com/partde...5&autoview=sku

The cost of that kit is exactly why we looked for a cheaper route. Looking at the installation instructions for it, it actually does the cruise control itself, as opposed to using the Yaris's built in functionality.

lunjiaow · 06-06-2009, 11:24 PM

Well i pulled apart my dash on the 07 Australian Delivered Yaris, to find there is no CCS blue wire from the ECM to the AD4 Plug. Unless i got it wrong but there was a blue wire on the bottom row which i doubt was the CCS wire.. Very disappointing.

PatrickJohnson · 06-07-2009, 03:40 AM

Quote:

Originally Posted by lunjiaow

Well i pulled apart my dash on the 07 Australian Delivered Yaris, to find there is no CCS blue wire from the ECM to the AD4 Plug. Unless i got it wrong but there was a blue wire on the bottom row which i doubt was the CCS wire.. Very disappointing.

You can run one very easily. It took me literally 20 minutes to install this from popping the hood all the way through to drive testing. And i had to run a wire.

lunjiaow · 06-07-2009, 07:55 AM

Ah yes. i saw on Page 16... will give it a shot tomorrow.

pennyracer · 06-10-2009, 11:38 AM

i have read most of this thread looks cool and cheap for cruise control . so on my early 08 lb automatic i can use the oem stock and what else do i need ? please help i put ton of miles on my car and cruise would be way nice to have for cheap

mrbond · 06-10-2009, 12:35 PM

^ you need wires going from the ECM to the little hub in the steering wheel column, a wire going from that hub to a ground point, and the stalk, and then a jumper wire for two pins in the engine bay. Everything's been outlined and explained, so you just need to read carefully. That's about it. I'm selling my stalk btw, since I just don't really want it.

pennyracer · 06-10-2009, 07:46 PM

cool thanks for the input

petyanca · 06-11-2009, 11:54 AM

I have 09 3 door liftback, and it seems all I need is a stalk. Could someone give me a link to where you got the stalk ? Thanks a lot for the investigating this !

regal · 06-11-2009, 12:03 PM

Quote:

Originally Posted by petyanca

I have 09 3 door liftback, and it seems all I need is a stalk. Could someone give me a link to where you got the stalk ? Thanks a lot for the investigating this !

If you have a clutch you need the clutch switch, the part number is in this thread

CTScott · 06-11-2009, 02:34 PM

Quote:

Originally Posted by petyanca

I have 09 3 door liftback, and it seems all I need is a stalk. Could someone give me a link to where you got the stalk ? Thanks a lot for the investigating this !

Either ebay ($12.99 + $17 shipping):
http://cgi.ebay.com/ebaymotors/TOYOT...lenotsupported

or TRDSparks.com ($81.99 plus shipping):
part number: 84632-34011

menz · 06-18-2009, 01:46 PM

i am going to try this soon as i get bk home next month i have 07 yaris i just hope ull all b here to ask for my questions

CTScott · 06-18-2009, 02:15 PM

Quote:

Originally Posted by menz

i am going to try this soon as i get bk home next month i have 07 yaris i just hope ull all b here to ask for my questions

I don't think it will work on your car. On European manufactured Yaris cruise control is not an OEM option, so the ECM doesn't support this mod.

Prisonguard · 06-20-2009, 08:00 PM

Ok, after reading all these posts I am now REALLY confused so please bear with me since I am also new here. I have an '09 S 5 door liftback, auto trans. In real simple terms since I am not an electrical engineer, what do I have to do to have the factory cruise installed. The dealer wants over $500 for an aftermarket one which is ridiculous.

CTScott · 06-20-2009, 09:26 PM

Quote:

Originally Posted by Prisonguard

Ok, after reading all these posts I am now REALLY confused so please bear with me since I am also new here. I have an '09 S 5 door liftback, auto trans. In real simple terms since I am not an electrical engineer, what do I have to do to have the factory cruise installed. The dealer wants over $500 for an aftermarket one which is ridiculous.

With an 09, you can simply purchase the OEM cruise control stalk (Toyota part number: 84632-3401), pull the steering wheel and install it, and you'll have cruise control.

Or, check out this thread for adding cruise to your 09 auto for about $10:

http://www.yarisworld.com/forums/sho...ght=diy+cruise

Henry G. · 06-22-2009, 03:04 PM

Just to confirm after reading 24 pages.....this will work on an '08 MT but you need the stalk, the clutch switch and need to do some wiring to the fuse box, correct?

06-05-2009, 11:20 PM	#325
nickhjort My R1 eats my Vitz!! View User's Garage Drives: '07 Vitz Lifty, Stick Shift Join Date: May 2007 Location: Oneida, NY Posts: 131	Hold on just a couple more days and I'll have that module installed. I just haven't had time to rip the dash again. I also have to rethink my clutch switch, the switch broke. That's what I get for going cheap :) Anyway, I'll prolly just buy the oem one. I'll put picks up when I'm done with all of this... __________________ My Car Rules!

06-06-2009, 11:30 AM	#327
PhilD424 Drives: Red Yaris Join Date: May 2009 Location: NYC Posts: 80	http://store.summitracing.com/partde...5&autoview=sku __________________ -Phil

06-10-2009, 12:35 PM	#333
mrbond View User's Garage Drives: 2008 meteorite hatchback Join Date: Nov 2008 Location: Illinois Posts: 960	^ you need wires going from the ECM to the little hub in the steering wheel column, a wire going from that hub to a ground point, and the stalk, and then a jumper wire for two pins in the engine bay. Everything's been outlined and explained, so you just need to read carefully. That's about it. I'm selling my stalk btw, since I just don't really want it. __________________ - HOOOEY! That's one tahny little cawr! What the heck kinda toy is that? - A Toyota Yaris - A whut Yaris?

06-11-2009, 11:54 AM	#335
petyanca Drives: 09 LB, 3 door, auto Join Date: May 2009 Location: CA Posts: 23	So it should work .. I have 09 3 door liftback, and it seems all I need is a stalk. Could someone give me a link to where you got the stalk ? Thanks a lot for the investigating this !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag	CTScott	DIY / Maintenance / Service	307	04-04-2023 03:43 AM
DIY Cruise Control on 07-08 Yaris (step by step)	Vince87	DIY / Maintenance / Service	431	12-28-2020 01:37 AM
Cruise Control - Again!	CB900F2	DIY / Maintenance / Service	47	06-17-2010 06:29 PM
Cruise control vs MPG	YarisOwnersDad	Fuel Economy Forum	15	05-29-2009 03:55 PM
Using Cruise control	Driver	General Yaris / Vitz Discussion	14	11-09-2006 10:12 PM

06-06-2009, 11:24 PM	#329
lunjiaow Drives: Yaris Join Date: Nov 2008 Location: Perth, Australia. Posts: 189	Well i pulled apart my dash on the 07 Australian Delivered Yaris, to find there is no CCS blue wire from the ECM to the AD4 Plug. Unless i got it wrong but there was a blue wire on the bottom row which i doubt was the CCS wire.. Very disappointing.

06-07-2009, 07:55 AM	#331
lunjiaow Drives: Yaris Join Date: Nov 2008 Location: Perth, Australia. Posts: 189	Ah yes. i saw on Page 16... will give it a shot tomorrow.

06-10-2009, 11:38 AM	#332
pennyracer boydstir View User's Garage Drives: 08 yaris liftback Join Date: Feb 2009 Location: grants pass Posts: 424	i have read most of this thread looks cool and cheap for cruise control . so on my early 08 lb automatic i can use the oem stock and what else do i need ? please help i put ton of miles on my car and cruise would be way nice to have for cheap

06-10-2009, 07:46 PM	#334
pennyracer boydstir View User's Garage Drives: 08 yaris liftback Join Date: Feb 2009 Location: grants pass Posts: 424	cool thanks for the input

06-18-2009, 01:46 PM	#338
menz Drives: yairs blue 2007 automatic 1.3 Join Date: Apr 2007 Location: Egypt Posts: 24	i am going to try this soon as i get bk home next month i have 07 yaris i just hope ull all b here to ask for my questions

06-20-2009, 08:00 PM	#340
Prisonguard Drives: 5 door hatch Join Date: May 2009 Location: find me Posts: 7	Ok, after reading all these posts I am now REALLY confused so please bear with me since I am also new here. I have an '09 S 5 door liftback, auto trans. In real simple terms since I am not an electrical engineer, what do I have to do to have the factory cruise installed. The dealer wants over $500 for an aftermarket one which is ridiculous.

06-22-2009, 03:04 PM	#342
Henry G. Drives: 2008 Yaris HB Join Date: May 2009 Location: So Cal. Posts: 100	Just to confirm after reading 24 pages.....this will work on an '08 MT but you need the stalk, the clutch switch and need to do some wiring to the fuse box, correct?