NST (NonStopTuning) Pulleys. Info, Specs, User Data... - Page 2 - Toyota Yaris Forums

Galavoxx · 04-05-2007, 01:30 PM

Quote:

Originally Posted by PetersRedYaris

Question: Some new vehicles require a new crank pulley bolt if it has been removed, sort of like a one time use head bolt, because they stretch and are considered a one time use item. Is this true with the Yaris? If the crank bolt worked it's way loose because it was reused when it wasn't supposed to be that would be bad.

I'm going to talk to a service guy I know down at our Toyota dealer and see what his take is on this mod.

I put red loctite on mine. I pity the fool who has to remove it. Probably end up being me...

ChinoCharles · 04-05-2007, 02:29 PM

Yeah, I used the blue loctite... just in case it ever does have to come off.

PetersRedYaris · 04-05-2007, 05:30 PM

That red is too strong in my opinion. I always use the blue medium strength and still think it's tough to get bolts undone somtimes.

Galavoxx · 04-05-2007, 06:48 PM

Quote:

Originally Posted by PetersRedYaris

That red is too strong in my opinion. I always use the blue medium strength and still think it's tough to get bolts undone somtimes.

Air tooools my friend. Air tools.

Black Yaris · 04-05-2007, 06:49 PM

When is the rest of the pully set due out?

ChinoCharles · 04-05-2007, 06:52 PM

Summer 07.

Could I be any more vague? No.

Black Yaris · 04-05-2007, 07:57 PM

summer..... winter.... ain't they all the same here in Ohio.... Don't you love snow in April!!!!

PetersRedYaris · 04-05-2007, 08:23 PM

Quote:

Originally Posted by Galavoxx

Air tooools my friend. Air tools.

Sure, for car parts. Air tools won't work on Mt. Bike parts.

Galavoxx · 04-06-2007, 10:48 AM

Quote:

Originally Posted by PetersRedYaris

Sure, for car parts. Air tools won't work on Mt. Bike parts.

Says who? haha.

Vic-2NZFE · 04-06-2007, 01:29 PM

Will these fit old Yaris like the one on the sig?

whooppee777 · 04-06-2007, 01:41 PM

how hard is it to install a pulley such as this one? what exactly is the procedure?

Black Yaris · 04-06-2007, 01:59 PM

Quote:

Originally Posted by whooppee777

how hard is it to install a pulley such as this one? what exactly is the procedure?

there are step by step instructions for ya guy
http://yarisworld.com/forums/showthread.php?t=3964

Galavoxx · 04-06-2007, 02:12 PM

Quote:

Originally Posted by Vic-2NZFE

Will these fit old Yaris like the one on the sig?

No. The old Yaris has a 2 belt pulley, from what I understand. You may be able to use a Scion pulley. Ask the Scion guys over on Scionlife.com.

Doc Zaius · 04-06-2007, 07:56 PM

Hey NST or Chino... are there any plans on making an A/C pulley as well? Heck, I'm not even sure if its replaceable..!

ChinoCharles · 04-06-2007, 09:19 PM

No, because anyone that wants horsepower that badly can just remove that pulley and get a shorter belt.

No, honestly there are no plans as of yet, but as long as we keep supporting NST... NST will keep supporting us. Never know.

NonStopTuning · 04-06-2007, 10:14 PM

Quote:

Originally Posted by Doc Zaius

Hey NST or Chino... are there any plans on making an A/C pulley as well? Heck, I'm not even sure if its replaceable..!

Very good question Doc!

Chino gave you a very good answer there, but I will take it one step further for you. The A/C pulley on most Toyotas is a "clutch-type" pulley. This clutch engages from time to time in order to start your compressor. Building a lightweight version of this type is very difficult and very expensive. And to be honest with you, the gains would not be worth the cost. Those building track cars would rather eliminate the A/C unit.

Other Updates:

We are currently working on a few things for you guys. Some of these are new alternator and water pump pulleys. Keep an eye on our site for a summer release.

Last but not least... Contrary to popular belief, supply of aftermarket products relies much more on the DEMAND side rather than the supply side! And demand does not mean you guys posting on forums and saying "build stuff for us!" Demand means you guys supporting the aftermarket companies that are willing to cater to your needs, build and test quality products, and offering you a great value. The more you support these companies by actually USING their current products, the more they will be willing to build you other products in the future.

Having said all of this, I want to thank all of you who have supported us thus far. I promise you that if you keep supporting us, I will keep working very hard to design, test, and bring new products to the market for you guys.

Doc Zaius · 04-06-2007, 10:50 PM

Thanks for the answer Mike (and Chino!) re: A/C pulley.

And with regards to demand driving the aftermarket support, now that its warm out I'm very much looking forward to installing my cherry red NST crank pulley. Just wanna get it on the dyno first for a stock run. AANNNDDD I can't wait for the other pulleys to be released this summer... I'll be in that group buy too!

Z

sdmf · 04-10-2007, 10:39 AM

well i got a crank pulley from another member on the forum, havent put it on since there are more nst goodies on the way. :) but i would like to know if nst would be making a flywheel anytime soon? am i just dreaming or is it in the process, chino? nst?

04-05-2007, 06:49 PM	#23
Black Yaris der Zeck View User's Garage Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006 Location: Toledo, OH Posts: 5,231	When is the rest of the pully set due out? __________________

04-05-2007, 07:57 PM	#25
Black Yaris der Zeck View User's Garage Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006 Location: Toledo, OH Posts: 5,231	summer..... winter.... ain't they all the same here in Ohio.... Don't you love snow in April!!!! __________________

04-06-2007, 01:29 PM	#28
Vic-2NZFE View User's Garage Drives: Yaris 2NZFE Join Date: Feb 2007 Location: Panama Posts: 708	Will these fit old Yaris like the one on the sig? __________________ It's a Vitz!

04-06-2007, 07:56 PM	#32
Doc Zaius Lurker supreme! View User's Garage Drives: old and boosted! Join Date: Nov 2006 Location: Ottawa, ON, Canada Posts: 792	Hey NST or Chino... are there any plans on making an A/C pulley as well? Heck, I'm not even sure if its replaceable..! __________________ 2006 Red Blitzed RS 5-door

04-06-2007, 10:50 PM	#35
Doc Zaius Lurker supreme! View User's Garage Drives: old and boosted! Join Date: Nov 2006 Location: Ottawa, ON, Canada Posts: 792	Thanks for the answer Mike (and Chino!) re: A/C pulley. And with regards to demand driving the aftermarket support, now that its warm out I'm very much looking forward to installing my cherry red NST crank pulley. Just wanna get it on the dyno first for a stock run. AANNNDDD I can't wait for the other pulleys to be released this summer... I'll be in that group buy too! Z __________________ 2006 Red Blitzed RS 5-door

04-05-2007, 02:29 PM	#20
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Yeah, I used the blue loctite... just in case it ever does have to come off.

04-05-2007, 05:30 PM	#21
PetersRedYaris View User's Garage Drives: 2005 Scion xB Join Date: Nov 2006 Location: The Black Hills of South Dakota Posts: 1,059	That red is too strong in my opinion. I always use the blue medium strength and still think it's tough to get bolts undone somtimes.

04-05-2007, 06:52 PM	#24
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Summer 07. Could I be any more vague? No.

04-06-2007, 01:41 PM	#29
whooppee777 I used to have 1700 posts View User's Garage Drives: 2008 Yaris Hatch Join Date: Apr 2007 Location: Maryland Posts: 808	how hard is it to install a pulley such as this one? what exactly is the procedure?

04-06-2007, 09:19 PM	#33
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	No, because anyone that wants horsepower that badly can just remove that pulley and get a shorter belt. No, honestly there are no plans as of yet, but as long as we keep supporting NST... NST will keep supporting us. Never know.

04-10-2007, 10:39 AM	#36
sdmf Down With the Sickness Drives: 2007 yaris liftback Join Date: Feb 2007 Location: chicago Posts: 385	well i got a crank pulley from another member on the forum, havent put it on since there are more nst goodies on the way. :) but i would like to know if nst would be making a flywheel anytime soon? am i just dreaming or is it in the process, chino? nst? __________________ Strength - Determination - Merciless - Forever