|
07-29-2011, 07:11 PM | #19 |
Drives: 2009 3dr LB Manual Join Date: Mar 2010
Location: Dublin, Ohio
Posts: 412
|
I like that idea. But with only 0-3.2K ohms, you might need something to multiply the resistance up to around 100K or so?
|
07-29-2011, 08:31 PM | #20 | ||
always toyin'
|
Quote:
Quote:
-toy
__________________
- Procrastinators of the world unite! ...tomorrow. My Garage.. 'Mild' Drop & Misc..2-DIN GPS/Navi..DIY:Rear Wiper Delay..Ramps/Roll-Ups..Rain Sensing Wipers / Auto-Headlamps |
||
07-29-2011, 08:44 PM | #21 | ||
always toyin'
|
Quote:
Quote:
I googled "rain-sensing wipers" and came accross this site and I might just try it. It is listed as compatible with the Yaris. Rain Tracker Yaris Hot Side Switching Rain Tracker Wiring Diagram Perhaps this could be a better option than getting the intermittent stalk? -toy
__________________
- Procrastinators of the world unite! ...tomorrow. My Garage.. 'Mild' Drop & Misc..2-DIN GPS/Navi..DIY:Rear Wiper Delay..Ramps/Roll-Ups..Rain Sensing Wipers / Auto-Headlamps Last edited by toy_toronto; 07-29-2011 at 09:12 PM. |
||
07-29-2011, 11:33 PM | #22 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
__________________
|
|
08-02-2011, 05:36 AM | #23 |
I've made a post!
Drives: None Join Date: Aug 2011
Location: USA
Posts: 1
|
Thanks your share!I need these things!
__________________
baltimore toyota |
08-15-2011, 01:48 AM | #24 | |
always toyin'
|
Quote:
I went ahead and ordered the sensor due to lack of (cheap) Prius stalks on eBay. Pretty impressed with the sensor control system so far --I'll post up a short youtube demo shortly. Edit: YT clip here. http://www.yarisworld.com/forums/showthread.php?t=35960 -toy
__________________
- Procrastinators of the world unite! ...tomorrow. My Garage.. 'Mild' Drop & Misc..2-DIN GPS/Navi..DIY:Rear Wiper Delay..Ramps/Roll-Ups..Rain Sensing Wipers / Auto-Headlamps Last edited by toy_toronto; 08-15-2011 at 02:05 AM. |
|
08-16-2011, 06:24 PM | #25 |
Drives: Red '08 3 Door Join Date: Jul 2011
Location: PA
Posts: 28
|
Where did you get the knob, going to do this mod, but I want an knob that looks factory
__________________
Mors Certa, Hora Incerta, Memento Vivere |
08-16-2011, 08:44 PM | #26 |
always toyin'
|
__________________
- Procrastinators of the world unite! ...tomorrow. My Garage.. 'Mild' Drop & Misc..2-DIN GPS/Navi..DIY:Rear Wiper Delay..Ramps/Roll-Ups..Rain Sensing Wipers / Auto-Headlamps |
01-22-2012, 06:25 AM | #27 |
Drives: '08 Blazing Blue Yaris LB Join Date: Sep 2009
Location: USA
Posts: 496
|
wow I want the adjustable speed intermittent rear wiper too. You guys are so smart!
|
12-10-2012, 06:18 AM | #28 |
Drives: '08 Blazing Blue Yaris LB Join Date: Sep 2009
Location: USA
Posts: 496
|
Sure would be nice if someone would use pictures and language that actually shows how to install the switch that anyone can understand and not just advanced folks. I can follow directions that show wires in the colors that match the descriptions. Where the red wire and ground wires go etc. As it is I'm totally lost.
|
05-14-2014, 09:34 PM | #29 | |
Newbie
Drives: Yaris 2010 Join Date: May 2014
Location: Victoria
Posts: 1
|
Quote:
|
|
05-20-2014, 12:01 PM | #30 |
always toyin'
|
It's been a few years since I did the mod so I honestly can't remember which/what color wire I used.
You can pretty much choose any 12v source that is active only with key in the ignition. good luck
__________________
- Procrastinators of the world unite! ...tomorrow. My Garage.. 'Mild' Drop & Misc..2-DIN GPS/Navi..DIY:Rear Wiper Delay..Ramps/Roll-Ups..Rain Sensing Wipers / Auto-Headlamps |
06-27-2016, 09:14 AM | #31 |
Drives: 2010 Yaris Join Date: Mar 2016
Location: Drexel Hill, Pa
Posts: 37
|
Going to bump up this old thread as I was using the exact module listed.
Is it possible to have it ONLY work with the 'low' rear wiper setting with a Prius stalk? It seems this is geared to just having the wiper on. 12v+ from pin 6 12v - to white / black ground (pin 3 using the pinout on page 1) the com output to the blue wire (pin 7 ) Going the other way putting 12v+ from the stalk seems to want to run the relay all the time, which is not something I want to hear all the time. Anybody have luck with this ? Can anyone also recommend the proper pin to fit that absurdly small socket on the harness for pin 6 ?
__________________
2010 hatchback Fog lights, Kenwood touchscreen, backup camera |
06-27-2016, 12:27 PM | #32 |
Pumpman
Drives: 2019 Kia Soul EV Base Join Date: Dec 2014
Location: Langley, BC
Posts: 434
|
I've done this mod a couple years back with a Prius stalk too.
To answer your question, yes! It is possible. That's how I have it set-up on mine. The problem i ran into though is the pin for the rear wiper connector. I ended up paying $40+ for it because it's Toyota exclusive, and you can't seem to get anywhere else but the dealership. You might have better luck finding it online though. I was in a bit of a rush, and never really bothered to check. The part number is: 82998-24290. It's a direct fit for pin 6 of the connector.
__________________
"I would rather loose by a mile in a car I built myself, then win by an inch in a car that was built for me." - Moog |
06-27-2016, 06:59 PM | #33 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
__________________
|
|
06-27-2016, 08:47 PM | #34 | |
Drives: 2010 Yaris Join Date: Mar 2016
Location: Drexel Hill, Pa
Posts: 37
|
Quote:
Just the absurd small ones or the 'normal' pins as well. i might as well do some proper wiring vs my inserts. I'll send you a PM invader166 would you mind posting how you wired this ? Was my description correct?
__________________
2010 hatchback Fog lights, Kenwood touchscreen, backup camera |
|
06-30-2016, 12:12 PM | #35 | |
Pumpman
Drives: 2019 Kia Soul EV Base Join Date: Dec 2014
Location: Langley, BC
Posts: 434
|
Quote:
Generally speaking, the relay only comes on for 1/2 a second or so, to get the wiper moving. It will return to it's original position as a result of the eccentric cam profile of the motor. You do hear it click on and off when it operates. I guess you can also make/buy an enclosure for it, to not have all the circuitry exposed, but it's completely up to you. I never really bothered with that, and ended up mounting underneath the steering column, hidden from view, but still able to access it to adjust the timing with relative ease.
__________________
"I would rather loose by a mile in a car I built myself, then win by an inch in a car that was built for me." - Moog |
|
07-07-2016, 07:15 PM | #36 |
Pumpman
Drives: 2019 Kia Soul EV Base Join Date: Dec 2014
Location: Langley, BC
Posts: 434
|
Alright! Finally had a chance to refresh my memory.
I only used 4 connections to wire up the delay unit: 12V+ ---> Black wire from front wipers connector. 12V- ---> Missing wire from rear wiper connector. (pin 6) NO ---> White wire with black stripe on rear wiper connector. (or any other ground wire) COM ---> Blue wire from rear wiper connector. Should work as if it were originally fitted from the factory.
__________________
"I would rather loose by a mile in a car I built myself, then win by an inch in a car that was built for me." - Moog |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 07:50 AM |
Removing rear wiper | fred812 | Cosmetic Modifications (Exterior/Interior) | 34 | 01-27-2013 12:22 AM |
When will the Yaris hit the showrooms at dealers? | Petrolhead | New YARIS Purchase Forum | 181 | 11-28-2011 07:03 AM |
Slight mod to rear | NickNickNick | Cosmetic Modifications (Exterior/Interior) | 4 | 05-11-2006 01:03 AM |