Yaris Motor Swap Thread *Read before posting swap threads*

[jouna]

i'll stay with the 2zzfe they are pulling over 200bhp n/a in pr scary shit in the strip

[SEVEN]

See you guys are not thinking outside the box!!! Lets just put in a 2JZ!!!! Sure we would have to sit in the rear seats but hey!!! It'll be worth it!!! Imagine a twin turbo 2jz YARIS!!! Putting out 600whp!!!!

[Mouse]

For that I'd rather throw in a RB26DETT(with the AWD) and whoop the 2JZ's ass......There is a video on youtube of I think either a Mines or Tommy Kaira Skyline against a Power House Amuse Supra. The Skyline just kicks the supras ass.

Other notable swaps......how bout the 4G63 from the older eclipses and Evos.

Here is the Video.....http://www.youtube.com/watch?v=VK0uyCnY3m8

[Mouse]

How about a 1.8l V6 from the MX-3's...I think the engine designation is K8

[RS07]

Originally Posted by Malaya1221

how about a busa?
1340 cc (82 cu in), 4-stroke, four-cylinder, liquid-cooled, DOHC, 16-valve

x2

It has been done it the Smart, so why not in our cars ? Would be nice.

[aeipee13]

I think the 2zzge would be the most "true to form" swap for a new yaris. Has anyone even attempted it yet (in a hatch)? Anything but a Toyota engine would be blasphemy!

[etheliters]

I agree. Seems like there aren't any swap yaris hatch here. If your out there check in. were interested!!

[Attitude]

Hello
ive got vitz with 1szfe, i am willing to swap the engine
the available engines in my country is 1nzfe, are you people in favour of that ? it comes bolt on, no issues
please reply thanks

[thepaidtraveler]

Originally Posted by xen555

rotary engine this modifed engine 13b stage 2 only cost $2500 and see the number at 16psi lbs. of boost and the rotor engine can hold 24 lbs of boost... here in puerto rico theres a lot a modified cars with this type of engines making 9 sec. at the 1/4 miles and with a little more money they are making 7 to 8 sec. imagine that power in a car that weight almost 600 lbs. less than the rx7

Now that's a swap worth considering! There are lots of Rotorys around this country. I had thought about this about 2 months ago. Not only would it be different but it would probably be pretty neat to see.

[Saskatchewan17]

A 13b would be rediculously sick.
Same with an SR20. Is there room for a Nissan RB series engine? I'm guessing no way in hell.
Also to consider would be a B6T from the old Mazda 323 GTX.

[sheraz2000]

hi guyz, i have a vitz with 1KR-FE 1.0 L 68HP small engine in my car. yesterday while going around the scrap market, i found out many half-cuts of Vitz with 1NZ-FE. The engine was complete with an auto tranny, genuine wires and the ECU.

What i am wondering is, will the ECU cause me any problems at such a transplant. Even though the ECU is coming along with the engine, but will it be able to adjust to the new environment ?

The Engine mounts : Do i need to alter them at any point or will the newer engine fit bolt-to-bolt ?

What about the axels ??

Do i need the front shocks to be changed aswell ??

the cost of this transplant is not much, but what my concern is that is doing such, i dont loose my car at all?

please advise ....

[Marfulion]

how bout a built hayabusa engine? 200+ hp n/a, 10,000 RPM, anyone?

[Sabretooth]

Originally Posted by sheraz2000

hi guyz, i have a vitz with 1KR-FE 1.0 L 68HP small engine in my car. yesterday while going around the scrap market, i found out many half-cuts of Vitz with 1NZ-FE. The engine was complete with an auto tranny, genuine wires and the ECU.

What i am wondering is, will the ECU cause me any problems at such a transplant. Even though the ECU is coming along with the engine, but will it be able to adjust to the new environment ?

The Engine mounts : Do i need to alter them at any point or will the newer engine fit bolt-to-bolt ?

What about the axels ??

Do i need the front shocks to be changed aswell ??

the cost of this transplant is not much, but what my concern is that is doing such, i dont loose my car at all?

please advise ....

These are all things you would need to get advise locally from a mechanic that specializes in motor swaps...

Here in the US NO ONE has swapped a motor into our cars that naturally doesnt belong there, a couple of us have swapped 1.5L engines from another Yaris or even an Xb, but nothing scary and new...

Originally Posted by Marfulion

how bout a built hayabusa engine? 200+ hp n/a, 10,000 RPM, anyone?

Anything is possible, the motor should easily fit, seeing that they could fit it isnt a smart car, I dont see why a Yaris would be any different if not easier. The case is, finding an engine and finding a shop that is willing to do it.

With enough $$$$ you can make anything happen, Even probably shove a 350 small block in the back ;)

[Marfulion]

there is an abundant amount of hayabusa engines on ebay, all for less than 2k, but iam wondering now that you would probably need a different transmission as those bike transmissions are geared for a bikes weight, i wonder how they did with the smart car..

[revoturbo]

some one in indonesia built yaris with 3SGTE engine & 4wd !!! (swap engine ex celica st 205)..

[dougiefresh188]

if u need some oen to drive that 2jz yari i can sit in the back seet and still reach the controls. being 6'4 has its advantages

[george1973]

Originally Posted by supmet

The 3S-GTE engine is also found in celicas(GT4 = AWD) Doing a full custom AWD/3sgte swap from a celica GT4 to a yaris would premtty much be my dream swap.

The only problem is, that is one huge engine to squeeze into the yaris.

This is my dream too my friend...And i done it...........

[H3LlIoN]

Holy Shit! You can't come in here, drop something like that, and expect to walk out. Pics/details like NOW! That's badass dude.

Functional AWD, or just engine/tranny swap?