|
09-17-2007, 06:10 PM | #19 |
Drives: 2007 Yaris manual dark silver Join Date: May 2006
Location: Fond du Lac, WI
Posts: 694
|
__________________
7 Color Tach Fujita Intake Momo pedals Shift knob and boot. Full TRD SSK. Blitz exhaust Megan Lowering Springs (Next is DC Header) |
09-17-2007, 07:42 PM | #20 |
09-17-2007, 07:48 PM | #21 |
der Zeck
Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006
Location: Toledo, OH
Posts: 5,231
|
I want to see a 200WHP Yaris
__________________
|
09-18-2007, 08:40 AM | #22 |
Bathroom + Laptop = <3
|
holy upgraded internals black yaris... KABOOM!
|
09-18-2007, 06:42 PM | #23 |
Banned
Drives: yw calls me douche and racist. Join Date: Aug 2007
Location: hay
Posts: 2,183
|
200whp isn't that much.. I don't think..
B18s have already hit that. Seeing how this 1nz(or was it az? whatever the Yaris engine is) is a newer engine. I wouldn't think that it would be a big problem? |
09-18-2007, 06:52 PM | #24 |
Lurker supreme!
Drives: old and boosted! Join Date: Nov 2006
Location: Ottawa, ON, Canada
Posts: 792
|
Hehhehh... do a little more reading about the 1NZ-FE, and you'll begin to understand why more than doubling the engine's power output might require some pretty serious work and upgrades!
__________________
2006 Red Blitzed RS 5-door |
09-18-2007, 06:59 PM | #25 |
der Zeck
Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006
Location: Toledo, OH
Posts: 5,231
|
200 WHP is not all that unrealistic, on 6psi of boost, and totallaly doable on stock internals.... and ifmy car get's boosted and I smoke the engine do to too much power for the stock internals... Hell, I will a)completely rework a new motor sleave it and beef up the rest of the internals, slap a T3 and unleash some fury, or b)2zz swap.... and eventally boost that bitch too
My vote is A.... after talking to a few fellow members, I want to see what can be done with the 1NZ, lets push it till we can't push no more
__________________
|
09-18-2007, 07:00 PM | #26 |
der Zeck
Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006
Location: Toledo, OH
Posts: 5,231
|
Axles...... LOTS AND LOTS of axles
__________________
|
09-18-2007, 08:13 PM | #27 |
Banned
Drives: yw calls me douche and racist. Join Date: Aug 2007
Location: hay
Posts: 2,183
|
|
09-18-2007, 08:19 PM | #28 |
der Zeck
Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006
Location: Toledo, OH
Posts: 5,231
|
you be the first to 3sgte your yaris, you will be God..... expecially if you are running a modded 3S.... on stock internals you can push the 350WHP range... yeah, insane, but I can pick up S3-GTE swaps (complete drivetrain with ECU) in the $2000 range with decent miles on them
__________________
|
09-18-2007, 09:18 PM | #29 |
Bathroom + Laptop = <3
|
oooh you can probably cut down on the axles if you put on some full metal motor mounts... just rip the old ones out and put some metal discs in there from home depot... they do it on Sentra SE-Rs all the time because the motor causes too much wheel hop and breaks axles...
|
09-18-2007, 09:40 PM | #30 |
der Zeck
Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006
Location: Toledo, OH
Posts: 5,231
|
solid mount the motor..... that is thought.... Hmm.. would Aluminum be strong enough? If not just have them bitches machined out of stainless
__________________
|
09-18-2007, 09:53 PM | #31 |
200whp is not out of the question, as a lot of us know yaristurbo plut down 186whp to the wheels with a stock engine. the only worries will be the internals and axles.
i persoanlly think 200whp is too much at the moment with the lack of knowledge on these engines and ecu's. i plan on getting a spare engine soon and tearing it apart but the one thing i know from pulling down the metal "oil pan" is that the block is a not a normal one. it seems to have girdles as the Acura GSR's but machined onto the block... sorry i didn't take pics of them. well if all works ok my wideband should be here next week and then i'll be finishing the turbo install and taking it to the dyno... wish me luck! |
|
09-18-2007, 10:08 PM | #32 |
Drives: Yaris Join Date: Jun 2007
Location: Pittsburgh
Posts: 136
|
|
09-18-2007, 10:51 PM | #33 |
der Zeck
Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006
Location: Toledo, OH
Posts: 5,231
|
I do not annoy easily..... I drove an s-10 that would bottom out on a pubic hair
__________________
|
09-19-2007, 11:48 AM | #34 |
Bathroom + Laptop = <3
|
$4 down home depot for metal washer like rings 2 on eac side of mm and ur set ill look up the article in a min
|
09-19-2007, 12:04 PM | #35 |
Drives: Yaris Join Date: Jun 2007
Location: Pittsburgh
Posts: 136
|
|
09-19-2007, 12:20 PM | #36 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
don't forget the work on the transmission.
My kit comes next week, and I'm going to start with stock internals -- we'll see what she makes. It's all on paper until someone commits and completes.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dash Kit - No Mods | barryware | In Car Entertainment + Electronics (audio / video / alarm) | 8 | 09-14-2014 03:59 PM |
Under $2500 Turbo Kit w/Intercooler coming soon! | cdydjded | Forced Induction Forum | 58 | 09-23-2007 02:02 PM |
Under $2500 Tubo Kit Update | cdydjded | Forced Induction Forum | 16 | 08-26-2007 11:05 PM |
another small update on turbo kit. | joey1320 | Forced Induction Forum | 6 | 08-23-2007 04:51 PM |
Toyota Echo or Scion Xa/Xb for aftermarket HU receiver kit? | ceboyd | In Car Entertainment + Electronics (audio / video / alarm) | 7 | 12-08-2006 02:13 PM |