![]() |
|
|
|
|
|
#1 |
|
I've made a post!
Drives: 2008 Hatchback Yaris Join Date: Apr 2009
Location: Cherry Valley, IL
Posts: 1
|
Anyone ever hear a tanabe exhaust?
|
|
|
|
|
|
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
Lots of people on here have the Tanabe.
|
|
|
|
|
|
#3 |
|
OMG did that just happen?
Drives: 2008 Silver Toyota Yaris LB Join Date: Oct 2008
Location: Huntington Beach, CA
Posts: 2
|
Im thinking about going to my local muffler shop soon to get mine done... Anything I should know? Like I hear people saying there are 2 cats on it so should i get one taken off? Also Im sure im going to go with a Magnaflow and 2" piping.
__________________
d(>.<)b <--- Me! |
|
|
|
|
|
#4 |
|
The Hated One
Drives: 07 White Manual Sedan Join Date: Sep 2006
Location: Oregon,USA
Posts: 390
|
my glasspacks cost under $60 for both of them. the stainless tip was about $20. piping and install was about $100.
so, under $200 for exhaust from the cat all the way back with 2.25" piping. assuming you can find a good exhaust shop that does quality work, custom is way better and cheaper than aftermarket kits. whats more, most of the aftermarket set ups i have heard sound like crap. they either sound like they are a lawnmower or the car has a case of the farts. you need a long resonater on a 4 banger to get a deep tone, like over 20" of resonator or glasspack...and a second straight through turbo muffler or glasspack to tone it down. with a single glasspack its WAY too loud. my set up is still right around the legal limit, quite loud by most peoples definition. i tried it with a borla muffler on the end, and it was much quieter than the second glasspack, but the second glaspack cost $80 less(and i think it sounds better), plus with the borla it wasnt much louder than stock. moral of the story: custom exhaust > rice-in-a-box axleback systems
__________________
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Installing Greddy TI-C Exhaust System | redyaris | DIY / Maintenance / Service | 13 | 08-01-2009 05:05 AM |
| ZPI to produce yaris turbo kit and exhaust | turboyaris | Forced Induction Forum | 15 | 06-09-2007 02:24 AM |
| ZPI to produce yaris turbo kit and exhaust | turboyaris | Forced Induction Forum | 30 | 04-04-2007 03:10 PM |
| GReddy prototype = Free Exhaust! | Chris_Lum | California | 30 | 02-27-2007 11:13 PM |
| Fujitsubo Exhaust!! | MC-BPT | Sponsors Classifieds Area | 17 | 11-16-2006 11:36 AM |