What's with the Yaris hoods?

[fnkngrv]

^ From my experience I obtained higher speed with that gap taped and did not experience any temp increase issues. I haven't actually tested over say a full tank driving on the highway, but if I can attain better speeds with it taped then suffice to say that would also increase FE. They may have had their engineering reasons, but there are plenty of aftermarket components out there than increase safety, performance, reliability, or economy that would not have been that much of a price increase issue if done from the factory. Case in point would be the rear sway bar. This inclusion would have made the car much more stable especially in cornering (not even aggressive in nature) and high wind scenarios at highway/freeway speeds safer. This is especially critical when you look at how damned high they have the suspension set stock. Why did they not install one from the factory? Makes no sense.

[Gogogordy]

Originally Posted by fnkngrv

^ From my experience I obtained higher speed with that gap taped and did not experience any temp increase issues. I haven't actually tested over say a full tank driving on the highway, but if I can attain better speeds with it taped then suffice to say that would also increase FE. They may have had their engineering reasons, but there are plenty of aftermarket components out there than increase safety, performance, reliability, or economy that would not have been that much of a price increase issue if done from the factory. Case in point would be the rear sway bar. This inclusion would have made the car much more stable especially in cornering (not even aggressive in nature) and high wind scenarios at highway/freeway speeds safer. This is especially critical when you look at how damned high they have the suspension set stock. Why did they not install one from the factory? Makes no sense.

Built to satisfy a price-point. That means things like sway bars don't make the cut....you want sportier ride and the other trimmings you have to go upmarket (spendier car).

Product positioning isnt "sporty" with the Yaris....it's inexpensive.

[fnkngrv]

Originally Posted by Gogogordy

Built to satisfy a price-point. That means things like sway bars don't make the cut....you want sportier ride and the other trimmings you have to go upmarket (spendier car).

Product positioning isnt "sporty" with the Yaris....it's inexpensive.

a rear swaybar isn't just a sportier option. I just explained other justifications for it. Also if sportier wasn't part of their goal then they wouldn't have been trying to fake the funk all these years with in all honesty a lame S package. Their version of a S model is merely lipstick on a pig or woodgrain plastic garbage like found on higher end Hyundai vehicles 5-10 years ago. Your reasoning is flawed.

[BennyLava]

Originally Posted by Gogogordy

That gap is of NO consequence whatsoever.

Toyota didn't "overlook" it....thats not their M.O., there's probably a very good engineering or manufacturing rationale behind it. I doubt it's an "issue" or a deficiency...it's the way the car is and *somewhere* somebody knows why. Exactly why. That's engineering.

Perfection is unattainable no matter how much you spend on a car and "value" is where it's at.

In the big scheme, it's one of the finest, yet lowest priced cars around and that (seemingly) large gap between the hood and front fascia doesn't change that one iota.

Some of these replies... LOL. As an engineering student, I can tell you that's not even close to being true. Toyota (like all automakers) can and does make mistakes. You forget the "Moving you forward, even when you don't want to" bug? In most cases everyone likes to blame engineers but they're only human, they make mistakes just like everyone else. On top of that, they're dealing with a set budget and they can't go over it without permission from corporate. You sound like you just want to think that your Yaris is a flawless car and maintain your fanboyism with toyota. Well, (and this goes back to my engineering point) the Yaris is just an entry level car. It is THE entry level car in toyota's whole lineup.

So of course there are going to be overall quality and "fit 'n finish" items, that will arise. That for example, you simply would not see on an $80k Mercedes or BMW or whatever. Its going to happen, its called getting what you pay for.

Originally Posted by yougojay

Like I said, that sounds like a disaster...welding on extra metal to fix gaps? Never heard of that...and would NEVER try to fix gaps on a 15,000 + dollar car...never. I am perfectly fine with this 1/4'' gap. The car panels line up excellent. It is like night & day versus an American made car.

You're not very familiar with automotive restoration then. I promise you its going on all over the country in autobody shops, as we speak. I'll see if I can dig up a link about the process, although I don't see why you couldn't imagine that it would work great. You have a gap, and you tack weld on a few small welds to hold it on. You use filler to get it all evened up and smooth, then you sand, primer and paint. What exactly is hard to understand about how that would seal up a gap, and look like it came that way? You familiar with what they do in wood working? Or masonry? Or other metal working?

Also I have 2 other american cars, besides my Yaris. While I won't disagree that some american cars may share the type of fitment problems as the yaris hood, mine don't. Neither of my other two cars have anything even close to the problem the Yaris hood has, that's part of the reason I started this thread. (2008 F-150, 2010 Dodge Challenger)

http://www.antiquecar.com/bodyshop_door_buildup.php

You'll have to scroll down a bit to get to the gap welding part. Absolutely no reason you couldn't do this to a yaris hood to fix that awful gap. There is also a video of the process from Powerblock TV, I will see if I can find later on when I have time.

[Flipper_1938]

Originally Posted by BennyLava

http://www.antiquecar.com/bodyshop_door_buildup.php

You'll have to scroll down a bit to get to the gap welding part. Absolutely no reason you couldn't do this to a yaris hood to fix that awful gap. There is also a video of the process from Powerblock TV, I will see if I can find later on when I have time.

Old cars were built out of real metal. Late models are built out of beer cans. It would be real fun to try and build up the yaris hood gap with mig welder.

[DebbyM46227]

Complaining about a tiny gap in the hood? Seriously....you all need to find something else to do with your spare time.

[Flipper_1938]

Originally Posted by DebbyM46227

Complaining about a tiny gap in the hood? Seriously....you all need to find something else to do with your spare time.

It is an ugly body line. It does not belong there even if it was 1/8" wide. A longer hood would look a lot better. Screw the pedestrians!

[fnkngrv]

Originally Posted by DebbyM46227

Complaining about a tiny gap in the hood? Seriously....you all need to find something else to do with your spare time.

Far from Tiny!



This is mammoth and when it gets down to it this type of a gap seriously increases drag which in turn affects power as well as FE.

[Flipper_1938]

My suggestion

[D&D]

Originally Posted by Flipper_1938

My suggestion

This would have required moving the hood latch (and the radiator core support that it bolts to) further forward. This would result in a larger and longer front bumper.

[Flipper_1938]

Originally Posted by D&D

This would have required moving the hood latch (and the radiator core support that it bolts to) further forward. This would result in a larger and longer front bumper.

[yougojay]

Originally Posted by DebbyM46227

Complaining about a tiny gap in the hood? Seriously....you all need to find something else to do with your spare time.

[DebbyM46227]

Originally Posted by yougojay

I'm glad someone agrees with me. I just took a look at that MAMMOTH gap myself!!! It measures less than 3/16" and looks no different that any other car I checked.

I stand by what I said earlier. Most of you need to find something more important to do with your spare time.

Another reason I find myself here on this forum less and less.

[fnkngrv]

Originally Posted by DebbyM46227

I'm glad someone agrees with me. I just took a look at that MAMMOTH gap myself!!! It measures less than 3/16" and looks no different that any other car I checked.

I stand by what I said earlier. Most of you need to find something more important to do with your spare time.

Another reason I find myself here on this forum less and less.

must be nice. I never really bothered to measure before, but because of this thread I decided to go ahead and do it. My gap is 5/8". As I have said before it very well could be due to sag from over the years. If you don't like the discussion then move on to another instead of complaining about someone else's complaints. Since the Yaris came out in NA even though folks have loved it they have been known to call out flaws. There really are plenty of corners that Toyota cut in the name of "cheap" that other manufacturers have not with the Yaris hence the reason in reviews it has been beaten out every year since the 07 model hit our shores. It is just the nature of the beast.

[nookandcrannycar]

Originally Posted by yougojay

The gap in the hood doesn't matter to me, but I disagree with your sentiment on this one.

[fnkngrv]

^ my gap issues will be addressed this winter when I have my TRD Australia body kit installed. My body guy is amazing. Thanks, but what you are suggesting would not be legal in my class for my racing.

[DebbyM46227]

[nookandcrannycar]

Originally Posted by DebbyM46227

I think most of the women in my life and my past (family, friends, and ex-girlfriends) would say that I am one of if not the least sexist male they have ever known. That said.....the meanderings of this thread.....It's a guy thing .