Intake Mani - Page 2 - Toyota Yaris Forums

CASTREX · 10-27-2008, 02:28 AM

This is the Nissan Versa intake Manifold

Yaris Palme · 10-25-2008, 07:48 PM

yeah i know what you mean.
this was mine dynotest: the big lines are mine, the small are from a old swift gti.
http://moe.rampage-guys.net/stuff/to...alme_yaris.pdf

Power PNorm136,0 PS / 100,0 kW
einginepower PMot 134,0 PS / 98,6 kW
wheelpower PRad 103,1 PS / 75,8 kW
towpower PSchlepp 30,9 PS / 22,8 kW
Max. power at 6260 rpm / 159,1 km/h

eTiMaGo · 10-27-2008, 02:51 AM

Before anyone asks, the Versa/Tiida has a different configuration for the intake, as you can see the tubes go over the engine. The manifold for our engines would not really look like that, they would have the same general shape as the stock manifold.

Yaris Palme · 10-27-2008, 12:29 PM

hmm, in combination with my K&N 57i Kit and my FOX exhaust with a higher flow....
because the shipping isn´t cheap i think i will wait. and then i will order the mani and the pully from NST.... could i made this over one of our guys here??

CASTREX · 10-27-2008, 01:01 PM

Probably Garm (Cali Yaris) could assist you with the shipping/logistic as he is a distributor for NST.

I know this is not a cheap part and shipping is expensive also...

But what you have to concider is that, if this Manifold gets to a production stage (Meaning the we find the 10 people that Richad is asking) this will probably became a rare piece and who knows if more units will ever be produced or sold... Just look how hard is to find 10 people only!!

I don't think the manifolds will be stocked by any store nor will be available for sale after this run, unless there are 10 more people willing to buy so Richard produces more.

So the way I see it is a one shot opportunity to get this done.

You have to concider the time frame for this. You won't need to pay the money right away.

First we need to get to the magic number of 10 people (We currently have 5). Then after the 10 people commit to buy the manifold it will take Richard at least 30 days to have the manifold ready. It will be until then that we will have to pay the $699.

My guess is that it will be close to the end of the year by the time that we actually have to pay the money. So that gives you time to start putting the money aside.
That will give you time also for NST to complete the development of the Pulleys.

Maybe Garm can hold the Manifold for you and consolidate the shipping with the pulleys once available.

What we need now is a real commitment to buy the manifold... so Richard can get the production process started.

Yaris Palme · 10-27-2008, 01:18 PM

hm. yes, i am very interested in those things, mani and pully.
but could someone say me the price for the pully, and circa the FULL price with schipping to me. and if cali could make this, i think i will order some more parts from microimage.

CASTREX · 10-27-2008, 01:31 PM

The official price for the NST pulleys has not been published yet as they are still on the development stage.

You can go to Garm's store http://www.microimageonline.com/store.html

and check the price for the US Yaris (1.5L 1NZ) pulleys. That should give you a general idea of what our pulleys might end up costing.

The price for the Intake Manifold will be $699.

You can sent a PM to Cali Yaris for shipping cost estimates so you can start working on a budget...!

10-25-2008, 07:48 PM	#2
Yaris Palme MAZDASPEED3 View User's Garage Drives: MazdaSpeed3 Join Date: Aug 2006 Location: Austria Posts: 186	yeah i know what you mean. this was mine dynotest: the big lines are mine, the small are from a old swift gti. http://moe.rampage-guys.net/stuff/to...alme_yaris.pdf Power PNorm136,0 PS / 100,0 kW einginepower PMot 134,0 PS / 98,6 kW wheelpower PRad 103,1 PS / 75,8 kW towpower PSchlepp 30,9 PS / 22,8 kW Max. power at 6260 rpm / 159,1 km/h __________________

10-27-2008, 02:51 AM	#3
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	Before anyone asks, the Versa/Tiida has a different configuration for the intake, as you can see the tubes go over the engine. The manifold for our engines would not really look like that, they would have the same general shape as the stock manifold. __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

10-27-2008, 12:29 PM	#4
Yaris Palme MAZDASPEED3 View User's Garage Drives: MazdaSpeed3 Join Date: Aug 2006 Location: Austria Posts: 186	hmm, in combination with my K&N 57i Kit and my FOX exhaust with a higher flow.... because the shipping isn´t cheap i think i will wait. and then i will order the mani and the pully from NST.... could i made this over one of our guys here?? __________________

10-27-2008, 01:18 PM	#6
Yaris Palme MAZDASPEED3 View User's Garage Drives: MazdaSpeed3 Join Date: Aug 2006 Location: Austria Posts: 186	hm. yes, i am very interested in those things, mani and pully. but could someone say me the price for the pully, and circa the FULL price with schipping to me. and if cali could make this, i think i will order some more parts from microimage. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Intake Installation	redyaris	DIY / Maintenance / Service	53	08-23-2014 06:34 AM
Intake Systems Decision Maker..	Blenjar	Performance Modifications	25	09-15-2007 11:07 PM
WR Secret Weapon Intake Dyno Tested..	WRLEO	Performance Modifications	70	05-17-2007 04:00 PM
Intake VS modified filter housing	Spades	Performance Modifications	19	03-30-2007 01:30 AM
Cold Air Intake vs. Short Ram Intake	nevermorez	Performance Modifications	1	01-24-2007 05:25 PM

10-27-2008, 01:01 PM	#5
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	Probably Garm (Cali Yaris) could assist you with the shipping/logistic as he is a distributor for NST. I know this is not a cheap part and shipping is expensive also... But what you have to concider is that, if this Manifold gets to a production stage (Meaning the we find the 10 people that Richad is asking) this will probably became a rare piece and who knows if more units will ever be produced or sold... Just look how hard is to find 10 people only!! I don't think the manifolds will be stocked by any store nor will be available for sale after this run, unless there are 10 more people willing to buy so Richard produces more. So the way I see it is a one shot opportunity to get this done. You have to concider the time frame for this. You won't need to pay the money right away. First we need to get to the magic number of 10 people (We currently have 5). Then after the 10 people commit to buy the manifold it will take Richard at least 30 days to have the manifold ready. It will be until then that we will have to pay the $699. My guess is that it will be close to the end of the year by the time that we actually have to pay the money. So that gives you time to start putting the money aside. That will give you time also for NST to complete the development of the Pulleys. Maybe Garm can hold the Manifold for you and consolidate the shipping with the pulleys once available. What we need now is a real commitment to buy the manifold... so Richard can get the production process started.

10-27-2008, 01:31 PM	#7
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	The official price for the NST pulleys has not been published yet as they are still on the development stage. You can go to Garm's store http://www.microimageonline.com/store.html and check the price for the US Yaris (1.5L 1NZ) pulleys. That should give you a general idea of what our pulleys might end up costing. The price for the Intake Manifold will be $699. You can sent a PM to Cali Yaris for shipping cost estimates so you can start working on a budget...!