|
02-24-2013, 09:53 PM | #379 |
1NZ-6spd
Drives: '05 6-Spd Vitz RS Join Date: Oct 2008
Location: Oshawa, Ontario, Canada
Posts: 2,967
|
Pistons should be perfectly round. A worn cylinder bore might not be though.
|
02-24-2013, 10:58 PM | #380 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
I think we have 76mm also.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
02-25-2013, 01:02 PM | #381 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
I have the 75.5 mm one. Might be getting a custom manifold made for the turbo. Cant fit it in there with the waste gate I was looking the the PT tuning one but not sure if it would fit back there.
|
02-25-2013, 01:13 PM | #382 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Why doesn't it fit? I have the same manifold I sell and mine fits back there.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
02-25-2013, 02:41 PM | #383 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
I have a internal wastage .
|
02-26-2013, 12:00 PM | #384 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
So my choices are as follows:
Order new external mani from MI and find an external WG Have a manifold custom made Sell everything and just get a new car lol. This unforseen expenditure will delay me a bit longer. |
02-26-2013, 12:43 PM | #385 | |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Quote:
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
|
02-26-2013, 02:04 PM | #386 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
Sorry if I was not clear. The internal wastegate is what is preventing it from fitting. It hits the firewall.
|
03-26-2013, 07:30 AM | #387 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
Last few parts I was waiting on have come in. New manifold and wastegate. Just one more thing to get... AEM EMS with pnp harness. I cant wait
|
06-22-2013, 01:12 PM | #388 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
Small update
Finally got all of the parts needed. Engine done and going in.
About 2 more weeks of work. |
07-04-2013, 11:39 AM | #389 |
Drives: 2010 black yaris Join Date: Oct 2010
Location: savannah, ga
Posts: 2,868
|
looks awesome.
__________________
-Derrick- "Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting." |
07-30-2013, 06:22 PM | #390 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
Went to the shop just to see how they were doing. Its pretty much all done but one problem is getting the TPS issue with the Haltech Sprint sorted out. The issues is that the Haltech is not reading the throttle position accurately. If he puts 50% throttle it reads between 70-100%. Tried a couple different settings but nothing seemed to fix it. Now were trying to figure out if it is tapped in the right location. I think its in C20-115 right now. Are there any other possible pin locations or settings I may have missed?
Anyway here are a few pics |
07-30-2013, 07:24 PM | #391 |
Takes corners too fast!
Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012
Location: Columbia, SC
Posts: 830
|
what does it read a t closed throttle? sounds like it is off keyed but further testing would be needed to determine for sure.
__________________
mods:15''Drag DR21 w/Nitto NeoGen 205/50R15, Tanabe DF210 lowering springs 1.6/1.8, TRD Rear Sway Bar, Tanabe Front Sway Bar, Micro Image Short Throw Shift Kit (both in and under), 8.64lbs flywheel, F1 Stage 4 Clutch, AEM Cold Air Intake (Red), Megan Racing Header, DC Sports Axle Back Exhaust, Micro Image Crank Pulley, NST lite Alternator Pulley, ARP Manifold Stud Kit,Tanabe Front Strut Tower Brace, ScanGuage II, Micro Image Silicone Radiator Hose Kit (Red), NRG Carbon Fiber Shift Knob (round), 2009-2011 Toyota Yaris Liftback Foglight kit, NRG Grounding Kit (Red), Hella Horns(Red),CF Hood |
07-30-2013, 07:35 PM | #392 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
Cant member what it was. I know the blitz guys use A21-55 for an input not sure it would work for me but I will try anything at this point. If I get this solved then by Friday i will pick her up.
|
08-01-2013, 12:33 PM | #393 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
Anyone have any ideas? Seems like the FI section went belly up.
|
08-01-2013, 01:48 PM | #394 |
Mr. 155 and climbing
Drives: Seriously Modded 07 Sedan Join Date: Jun 2006
Location: In The Hotbox
Posts: 4,742
|
Is this possibly a drive by wire issue? Are you still using the stock ECM for DBW?
__________________
Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes. |
08-01-2013, 02:33 PM | #395 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
|
08-01-2013, 04:38 PM | #396 |
Mr. 155 and climbing
Drives: Seriously Modded 07 Sedan Join Date: Jun 2006
Location: In The Hotbox
Posts: 4,742
|
Have you reached out to Carlos to ask him yet?
__________________
Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Turbo Project Yaris TS 1.8L | CASTREX | Yaris TS Talk | 40 | 08-21-2009 10:24 AM |
HKS turbo timer type 1 | Tamago | Performance Modifications | 3 | 07-21-2009 11:59 AM |
Turbo Kit - trade for stock parts! | crankyelbow | Items for Sale by private party | 62 | 02-03-2009 12:30 PM |
delayed turbo project... | joey1320 | Forced Induction Forum | 8 | 09-26-2007 11:18 PM |
Vitz Rs turbo vs U.S. Yaris add turbo? | weaponrcamry | Performance Modifications | 18 | 08-09-2006 08:45 PM |