|
03-11-2010, 09:41 AM | #37 |
2 hours of work last night, and I did finish the Trunk lid. Even dough Don (from sounddeadenershowdown.com) suggested me to apply only CLD Tiles to the Trunk lid I moved forward and treated as a door, well it's kind of a door and added some layers of CCF and a layer of MLV (man that thing is heavy).
I do have to get a pair of longer plastic holders I don't know how they are called but you push them in to hold the panel, the 2 that go in the center end up too short. I've seen this in other threads, so I guess it's common. Also did the License plate, one CLD Tile and a layer of 1/4" CCF. NICE! Noise level was between 5 and 6 but I had 2 boxes one with all the CCF and the other one with CLD Tiles. BUT I did notice something different this time! that my radio was set up to increase the volume as I speed up, I know it was set up but never noticed. It got to be the noise level or me putting more attention to every little sound. I did notice that I don't hear the pipe (OEM muffler) in the rear of the car any more, I hear the engine instead in front. And lots of noise from the doors and floor right under my self. I need to start laying all the electrical and audio wires before a cover the floor or should I leave them above the MLV and under the carpet? Lots of work to do... .
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
03-11-2010, 09:57 AM | #38 |
To Do List:
Trunk Lid - CLD, CCF, MLV, DONE Licence Plate - CLD CCF, DONE Install Amp Kit Install rear speakers Trunk Floor - CLD Trunk quarter panels - CLD Wheel wells - CLD Floor under back seat -CLD Rear Deck - CLD C-Pillar -CLD Vent valve in trunk - Right front seat Left front seat Fire wall Rear doors Front doors Install tweeters Roof - Some day Install EQ Install Amp Make box for sub-woofer More as we go... .
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
03-11-2010, 10:34 AM | #39 |
Dude them Rear 6x9's were a biatch, i had a reg ratchet with an adapter, the rear screws killed me. I had to rig something together to be able to get the socket in there. I think i scratched my tint a bit, ohh well i wanted to go darker anyways, and it's not noticeable. The c-pillars and carpet was a piece of cake.
__________________
Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3 |
|
03-11-2010, 01:50 PM | #40 |
Roadrunner Jr.
|
shorty right angle with a low profi socket.
...Hey, S7...get up to Daytona this weekend for the Spring Break Nationals. You want to see sound machines? Go visit the Hybrid Audio groupand prepare to start drooling...
__________________
To argue with a person who has renounced the use of reason is like administering medicine to the dead. ― Thomas Paine |
03-11-2010, 06:33 PM | #41 |
I knowww, my monday starts on friday though , so no way i'm getting off, i'm fixin to drop my management position...Lolll so i can do some weekend shows.
__________________
Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3 |
|
03-16-2010, 04:40 PM | #42 |
Ok I've spend a couple of hours every day since last Saturday.
These pictures show how I end up applying CLD Tiles to the Trunk, Quarter Panels and Rear Deck, I did put some extra RaamMat in the corners and or blocking openings in the frame. It's amazing how solid everything feels now. (still the noise penetrates) Then I put 1/8 CCF (foam) on the floor of the Trunk and Rear Deck, 1/4 CCF under the rear seat and wheel wells. On top of that goes the MLV (vinyl 1lb/sf), I did put it on the floor of the Trunk under the spare wheel tire, under the Rear Seat and on one wheel well (right side) I haven't seal (with HH-66 Vinyl Cement) the overlappings between MLV layers. Noise level is getting close to 5, I can tell the road noise from the quarter panels, rear bumper, and left wheel left. (there are no back seats) For the air valve I end up gluing to the quarter panel cover a 6 x 14 piece of 1/4 CCF and worked great, I hear no road noise coming from that source; I can flip from circ. air and fresh air and I can't tell the difference in noise like I did before. I also installed the main (-) ground, there was a big nut like the ones that hold the frame of the backseat. I started to run RCA cables and also installed the 3 1/2 speaker on the rear deck. Only using the OEM radio with OEM front speakers at front and these tiny 3 1/2 speakers, I can tell that I feel the difference already, feels like my OEM stereo got an upgrade (we are not there yet) I'm thinking on putting a DashMat like Sqcomp! I got some samples and this is what it looks like, I was thinking on putting a thin layer of 1/8 CCF to help absorb the noise from the windshield. More soon... .
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
03-16-2010, 10:31 PM | #43 |
Roadrunner Jr.
|
...I'm leaning towards the Cinder color...
__________________
To argue with a person who has renounced the use of reason is like administering medicine to the dead. ― Thomas Paine |
03-17-2010, 10:01 AM | #44 |
So far I think I'm going to get the Black one, the Ltd Edition it's nice but reflects a lot of light (glare) I asked them for a Black sample, I show another picture once I get the new sample.
D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
03-17-2010, 10:22 AM | #45 |
Ok, another late night for me zzzz
Worked a little bit on the left wheel well, and cut to size CCF for the Pillars, then I took some photos... In the pictures you can see the CCF (foam) under the MLV (vinyl). In one of the photos you can see how I glue a piece of CCF to the trim panel to absorb road noise coming from the air valve. Now I have to start gluing all the MLV together (where it overlaps) to create a good "SOUND BARRIER". Noise level is better than yesterday, with right and left wheel wells covered. . .
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
03-17-2010, 11:28 AM | #46 |
Roadrunner Jr.
|
Those lids look good mang...
I still think the best I want to do with mine is to put those factory rims on. I like the way those look. I just can't seem to find the center caps.
__________________
To argue with a person who has renounced the use of reason is like administering medicine to the dead. ― Thomas Paine |
03-17-2010, 04:05 PM | #47 |
Nice work, It's comming along very good.
__________________
Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3 |
|
03-17-2010, 05:01 PM | #48 |
Drives: 2007 hatchback Join Date: Feb 2010
Location: New England
Posts: 15
|
when I was working on my trunk area, I punched the floor pan very hard, I can hear resonance sound that lasts quite a while but I could not determine where it comes from. So I sit in the truck(with 180lb, I thought my weight could make a little difference), but nothing changes. This is so weird. Did you guys have any experience with this?
I will keep working on this car and do some other test. |
03-17-2010, 06:04 PM | #49 | |
Quote:
are you talking about the air valve? I'm lost here. D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
||
03-19-2010, 01:41 AM | #50 |
Frames under rear seats is back in place!
RCA cables running front to back, (+) 4g cable ready. I took pictures will upload tomorrow. (I mean later) Now I'm realizing / learning / experimenting that doesn't takes much to control resonance with CLD Tiles, and the use of CCF (Closed Cell Foam) to stop trim panels from rattling and the biggest and most wanted The MLV (mass loaded vinyl) barrier to keep the noise out. Its working (o: D.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC Last edited by derickveliz2; 03-19-2010 at 02:54 AM. |
|
03-19-2010, 01:12 PM | #51 |
Pictures of the frames that support the rear seat back in place...
I had to cut and trim the MLV a little bit where the frame anchors with the chassis; the frames fit perfectly.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
03-19-2010, 01:23 PM | #52 |
The rear right door treatment...
Taking the trim panel off was hard I bet the second door will be much easier. CLD Tiles taking care of the resonances on the flat areas of the door. My next step is to use 3/8 cylindrical form Extruded Butyl "Rope" this is going behind the intrusion bars, I have to leave gaps for water to drain. I'll take a picture after. This will help with resonances helping CLD Tiles do thier Job.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
03-19-2010, 03:52 PM | #53 |
Ok, here is what I'm going to do! I took a photo of the trim panel put the picture in AutoCAD to scale and then traced over to get the profile of the panel. I'm printing it and then will show if it works or not, I assume there is a factor of error because the camera creates a perspective of the image, but we'll see...
These are snapshots of the process...
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
03-23-2010, 01:05 PM | #54 |
No work over the weekend, the weather was great so I spent time with family, it's raining now, and today's ride was good, noise coming from the rear right door (naked) but all that noise that used to come from the back when raining it's gone.
I'll try to get some thing done tonight
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sound deadening: sq footage amount for 3dr | goku87 | In Car Entertainment + Electronics (audio / video / alarm) | 29 | 11-14-2013 12:37 PM |
2007 Yaris S Sound Deadening | sqcomp | In Car Entertainment + Electronics (audio / video / alarm) | 70 | 12-13-2010 07:40 PM |
Sound deadening | 06vitzRS | General Yaris / Vitz Discussion | 10 | 05-05-2010 01:51 PM |
Sedan Door Panel Deadening | sqcomp | In Car Entertainment + Electronics (audio / video / alarm) | 42 | 06-01-2009 02:47 PM |