|
|
View Poll Results: Would you buy one? | |||
No | 5 | 5.10% | |
Yes (for $75) | 46 | 46.94% | |
Yes (but it would have to be less than $75) | 7 | 7.14% | |
Yes (but I still want it to also display the time) | 40 | 40.82% | |
Voters: 98. You may not vote on this poll |
|
Thread Tools | Display Modes |
09-03-2009, 09:59 AM | #37 |
Drives: 07 Yaris Sedan Join Date: Aug 2009
Location: Jacksonville, FL
Posts: 45
|
i dont get it, i run my vin and it comes back a non-s but i have integrated radio and a tach. guess I am out of this :-(
|
09-03-2009, 10:41 AM | #38 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
If there's enough interest for non-left hand clock people, I'll just offer a "packaged" option, where the device is in a plastic box like a ScanGauge.
|
09-03-2009, 12:45 PM | #39 |
What I thought I'd do was
Drives: 09 Yaris Sedan Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
|
I have a 2009 sedan and my clock is on the right.
|
09-04-2009, 01:25 PM | #40 |
Drives: '07 Yaris HB Join Date: Apr 2006
Location: Sudbury, Canada
Posts: 520
|
We all have tachs + the clock is part of the fuel guage setup.
|
09-04-2009, 05:24 PM | #41 |
I think all the Yaris over here have Tach's as well , at least in the Hatch back they do
Cause we have the Digital dash i am more interested in water temp , and fuel mileage . just so you know And THANK YOU VERY MUCH , for even looking to do this . |
|
09-04-2009, 05:47 PM | #42 |
No you're pretty much correct only the US manual trans liftbacks got completely fucked. toyota usa engineering idiots...
|
|
09-04-2009, 06:33 PM | #43 | |
Quote:
CT: I am so down with this! You wlll solve the 'no tach' issue very OEM and I can finally get rid of my aftermarket tach. I love the idea of an outside temp option. I agree with Garm. This a a great idea and I will buy it a heartbeat.
__________________
AEM CAI, NST Pulleys/SSK, WR 4-2-1 Header, TRD axelback, R1 Concept Rotors, TRD Sway Bar, Nitto Rear Strut Bar, Cusco GT-Zero Coilovers, 1ZZ-FE 1.8L TB |
||
09-04-2009, 09:08 PM | #44 | |
Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006
Location: Las Vegas, NV
Posts: 1,285
|
Quote:
Also, to get outside temps. you'll need to sell a thermometer probe like the kinds used with Gentex and CIPA rear-view mirrors that show outside temps., right? |
|
09-04-2009, 09:58 PM | #45 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
Correct on the sensor probe for outside temp (although if I can figure out the CAN messaging for the A/C ECU, I can use it's outside temp probe and save people having to run a probe wire through the firewall). I am making great progress on this. I built a CAN bus interface this week and can read the PIDs (all of the standard OBD data), can read and reset stored DTCs, and can sniff the communication on the CAN bus between the ECM and the body ECUs. |
|
09-04-2009, 10:01 PM | #46 |
Progress, is good , you so need a Yaris Medal of Honor
|
|
09-04-2009, 10:03 PM | #47 | |
Start another Oil Thread!
|
i want one and i don't even have a clock
__________________
Quote:
|
|
09-04-2009, 10:29 PM | #48 |
Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006
Location: Las Vegas, NV
Posts: 1,285
|
So are you planning on two versions? One being a replacement for the clock module for the ones with the left hand clock and one for those with the right hand clock?
The whole allure in this in the beginning was in replacing the clock with a multi-function device that fit in the same spot. |
09-04-2009, 11:32 PM | #49 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
|
|
09-05-2009, 01:05 AM | #50 | |
Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006
Location: Las Vegas, NV
Posts: 1,285
|
Quote:
Oh no, I was just wondering. My clock is on the left like all other 5-door '09s in the US. |
|
09-05-2009, 01:43 AM | #51 |
Drives: 2008 Red Yaris LB 5 sp Join Date: Jan 2009
Location: Oklahoma City, Oklahoma
Posts: 63
|
Count me in. Ill buy one in a heartbeat!!1
|
09-05-2009, 11:11 AM | #52 |
Drives: 2009 Meteorite Metallic LB MT Join Date: Oct 2008
Location: Southeast Wisconsin
Posts: 810
|
I like the idea of a temperature readout and a clock, and the other features.
Being that my car is still brand spanking new to me (10 months), I still haven't taken anything apart on it. However, I might be forced to try a mod. |
09-05-2009, 12:12 PM | #53 |
oh, oh, how about intergrating a scangauge in the cluster? im sure the LCD is detachable from the rest of the circuit board! get anotehr lcd size and stick that sucker somewhere :P
Last edited by enviri; 09-05-2009 at 02:40 PM. |
|
09-05-2009, 09:54 PM | #54 | |
Quote:
__________________
AEM CAI, NST Pulleys/SSK, WR 4-2-1 Header, TRD axelback, R1 Concept Rotors, TRD Sway Bar, Nitto Rear Strut Bar, Cusco GT-Zero Coilovers, 1ZZ-FE 1.8L TB |
||
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
in dash clock as tach? | Cosmonaut | In Car Entertainment + Electronics (audio / video / alarm) | 10 | 07-12-2010 11:27 AM |
digital tach, 52mm, preferably blue leds | severous01 | Cosmetic Modifications (Exterior/Interior) | 5 | 05-15-2009 10:58 AM |
Digital Tach | nqd | Performance Modifications | 4 | 05-17-2007 12:04 PM |