My build thread! 07 HB - Page 3 - Toyota Yaris Forums

G-Ammo · 12-07-2013, 10:07 AM

Yes! Post a DIY of it... would help me alot mate!!!! I already found some double sided tape on ebay for exterior use (quite expencive tbh but worth it)

FlushYaris · 12-30-2013, 04:24 AM

Before the flares! Look at that fitment! :D

So this is the final product.

So best DIY for you guys. Is to get 4 small screws and drill inside the bumper and fender. For the FRONTS. You will need to do some plastic welding on the inside as you can see here.

Don't judge me on my plastic welding skills. They look like poop on the inside but who is going to look under there? LOL
NOW for the backs
You will need to plastic weld a bracket on the middle of the inside of the flare.That is where you will put the double sided tape on. Make sure you secure the SH"T out of it or it'll slowly bounce back and forth. LOL

Same thing on the rears to bolt on the inside flares to the bumper. You only need to use 2 one on each side.
THEN BAM!

G-Ammo · 12-30-2013, 05:35 AM

Sweet! thank you so much... I think I have an idea to put them on too! Just some screws on the inside which is genius, so I dont have holes on the outside! And that plastic welding shouldnt be a problem! Maybe I can find something different if it doesnt work! But ill put a DIY too if I could work it out! Thank you so much man!!! Going to try them on tonight!

G-Ammo · 12-30-2013, 06:13 AM

My fenders are a bit different... hope they work though. I think mine arent from a GTI. we ll see how it works out

1.5 · 12-30-2013, 07:59 AM

plastic welding, never heard that term before lol

G-Ammo · 12-31-2013, 08:33 AM

Well I have to cut them in pieces... cause mine dont fit that well actually :(

Mine will probably cover only the top of the wheel :) Hopefully that would be a nice sight too... kinda like a rocket bunny thing haha

FlushYaris · 02-08-2014, 09:52 PM

On to new wheels!

Also picked up a $100 bucket :)

TerenceCruz · 02-09-2014, 12:12 AM

Nice wheel choice! Should look really good. That seat is pretty clean too!

1.5 · 02-09-2014, 09:50 PM

So you went with the xxrs you were talking about. Looks so good man. Looks like you added some Camber too? What did you use?

FlushYaris · 02-15-2014, 05:09 AM

New setup!

This is the final height I am going for.

Banana Man · 03-01-2014, 07:07 AM

Quote:

Originally Posted by FlushYaris

New setup!

This is the final height I am going for.

wheel size, offset and tire specs please

1.5 · 03-02-2014, 11:04 AM

Quote:

Originally Posted by Banana Man

wheel size, offset and tire specs please

Being xxr 527s it would have to be 17x8.25 +25 tires look like 195/40 or 205/40

Banana Man · 03-02-2014, 10:45 PM

Quote:

Originally Posted by 1.5

Being xxr 527s it would have to be 17x8.25 +25 tires look like 195/40 or 205/40

How about the fenders? were they rolled?
Thanks for the info

1.5 · 02-15-2014, 08:51 AM

Damn! you stancey huh???!!!

I like the last two pics height but the first one is meh

G-Ammo · 02-16-2014, 06:09 PM

DOPE!!!!!! :D

MiSFiTx87 · 02-20-2014, 03:42 AM

clean red yaris

FlushYaris · 02-27-2014, 04:40 AM

Got some good rolling shots today! Oh and I just got a set of rear Scion xa raceland coils for the rear and they seem to ride really nice and stiff. I need to get some front coilovers for the jelly.

Exiwolfman · 03-01-2014, 01:43 PM

Quote:

Originally Posted by FlushYaris

Got some good rolling shots today! Oh and I just got a set of rear Scion xa raceland coils for the rear and they seem to ride really nice and stiff. I need to get some front coilovers for the jelly.

very nice sick looking Yaris

12-07-2013, 10:07 AM	#1
G-Ammo Drives: Toyota Yaris 2009; 1.0 3 Cil. Join Date: Oct 2010 Location: The Netherlands Posts: 495	Yes! Post a DIY of it... would help me alot mate!!!! I already found some double sided tape on ebay for exterior use (quite expencive tbh but worth it) __________________ Speedbumps suck...!

12-30-2013, 05:35 AM	#3
G-Ammo Drives: Toyota Yaris 2009; 1.0 3 Cil. Join Date: Oct 2010 Location: The Netherlands Posts: 495	Sweet! thank you so much... I think I have an idea to put them on too! Just some screws on the inside which is genius, so I dont have holes on the outside! And that plastic welding shouldnt be a problem! Maybe I can find something different if it doesnt work! But ill put a DIY too if I could work it out! Thank you so much man!!! Going to try them on tonight! __________________ Speedbumps suck...!

12-30-2013, 06:13 AM	#4
G-Ammo Drives: Toyota Yaris 2009; 1.0 3 Cil. Join Date: Oct 2010 Location: The Netherlands Posts: 495	My fenders are a bit different... hope they work though. I think mine arent from a GTI. we ll see how it works out __________________ Speedbumps suck...!

12-30-2013, 07:59 AM	#5
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	plastic welding, never heard that term before lol __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

12-31-2013, 08:33 AM	#6
G-Ammo Drives: Toyota Yaris 2009; 1.0 3 Cil. Join Date: Oct 2010 Location: The Netherlands Posts: 495	Well I have to cut them in pieces... cause mine dont fit that well actually :( Mine will probably cover only the top of the wheel :) Hopefully that would be a nice sight too... kinda like a rocket bunny thing haha __________________ Speedbumps suck...!

12-30-2013, 04:24 AM	#2
FlushYaris Drives: 07 yaris 3dr Join Date: Aug 2013 Location: Portland, OR Posts: 87	Before the flares! Look at that fitment! :D So this is the final product. So best DIY for you guys. Is to get 4 small screws and drill inside the bumper and fender. For the FRONTS. You will need to do some plastic welding on the inside as you can see here. Don't judge me on my plastic welding skills. They look like poop on the inside but who is going to look under there? LOL NOW for the backs You will need to plastic weld a bracket on the middle of the inside of the flare.That is where you will put the double sided tape on. Make sure you secure the SH"T out of it or it'll slowly bounce back and forth. LOL Same thing on the rears to bolt on the inside flares to the bumper. You only need to use 2 one on each side. THEN BAM!

02-08-2014, 09:52 PM	#7
FlushYaris Drives: 07 yaris 3dr Join Date: Aug 2013 Location: Portland, OR Posts: 87	On to new wheels! Also picked up a $100 bucket :)

02-09-2014, 12:12 AM	#8
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Nice wheel choice! Should look really good. That seat is pretty clean too!

02-09-2014, 09:50 PM	#9
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	So you went with the xxrs you were talking about. Looks so good man. Looks like you added some Camber too? What did you use? __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

02-15-2014, 05:09 AM	#10
FlushYaris Drives: 07 yaris 3dr Join Date: Aug 2013 Location: Portland, OR Posts: 87	New setup! This is the final height I am going for.

02-15-2014, 08:51 AM	#14
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	Damn! you stancey huh???!!! I like the last two pics height but the first one is meh __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

02-16-2014, 06:09 PM	#15
G-Ammo Drives: Toyota Yaris 2009; 1.0 3 Cil. Join Date: Oct 2010 Location: The Netherlands Posts: 495	DOPE!!!!!! :D __________________ Speedbumps suck...!

02-20-2014, 03:42 AM	#16
MiSFiTx87 Drives: CS1 Join Date: Mar 2013 Location: 661 SoCal Posts: 107	clean red yaris

02-27-2014, 04:40 AM	#17
FlushYaris Drives: 07 yaris 3dr Join Date: Aug 2013 Location: Portland, OR Posts: 87	Got some good rolling shots today! Oh and I just got a set of rear Scion xa raceland coils for the rear and they seem to ride really nice and stiff. I need to get some front coilovers for the jelly.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2012 Audio Upgrade FAQ and Build Log	muffin_top	In Car Entertainment + Electronics (audio / video / alarm)	19	01-19-2022 07:28 PM
My Build Thread	1.5	Photo-Video-Media Gallery	649	11-18-2014 08:00 AM
Build thread! '08 Yaris Hatch	nimuntak	Photo-Video-Media Gallery	105	01-28-2014 03:28 PM
The open political discussion thread. Read the first post!	eTiMaGo	Off-topic / Other Cars / Everything else Discussions	342	09-15-2009 01:34 AM
Aftermarket rim thread vs official wheel guide	regal	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	1	04-01-2009 01:11 PM