|
12-28-2008, 10:37 AM | #73 |
Drives: Yaris 1.4 D-4D Join Date: Oct 2008
Location: Belgium
Posts: 75
|
|
12-28-2008, 11:27 AM | #74 |
Strange it's not showing up for you.
This is what I see... |
|
12-29-2008, 06:32 AM | #75 | |
Drives: Toyota Yaris XP9 Join Date: Nov 2008
Location: Yellow - Belgium
Posts: 56
|
Quote:
Therefore, if we can order several coilover kits together, the price might drop a bit... If not, i will go for lowering springs only. Last edited by Homeboy; 12-29-2008 at 06:54 AM. |
|
12-29-2008, 08:29 AM | #76 |
Mine is also already lowered (H&R) but only with springs because of what you say, coilover kits are expensive.
I bought mine for 200€, I could also buy V-maxx for about 130€, it goes a little lower and also with papers. But I chose H&R just because I think it's better quality. |
|
12-29-2008, 09:42 AM | #77 |
Drives: Toyota Yaris XP9 Join Date: Nov 2008
Location: Yellow - Belgium
Posts: 56
|
I have had V-maxx springs on my previous car, a Citroën C2, and I was very surprised about them in the positive way. They were pretty hard, but the road-holding qualities were extremely well!
That's why I'm considering to purchase them again for the Yaris now. In combination with the Tanabe strutbar and TRD swaybar, I think they will perform well. Are you satisfied with the H&R-springs? Are they soft, medium or hard? And do you feel that the handling has improved? |
12-30-2008, 05:18 AM | #78 | |
Drives: Yaris 1.4 D-4D Join Date: Oct 2008
Location: Belgium
Posts: 75
|
Quote:
http://www.how2tune.be or phone to GOCA for more informations Homeboy do you see Jochen? http://www.frappr.com/yarisowners I don't see it...! Last edited by Nico4960; 12-30-2008 at 05:31 AM. |
|
12-30-2008, 09:55 AM | #79 |
Drives: Toyota Yaris XP9 Join Date: Nov 2008
Location: Yellow - Belgium
Posts: 56
|
GOCA doesn't say anything about the springs you use. The only rule they have / use, is that the car may not be lower than 9cm from the ground (bodykits not included), with the driver in the car. Otherwise, it is 11cm without the driver. So, I think that 40mm shouldn't be any problem.
And no, I can't see Jochen either onto the map. |
12-31-2008, 04:42 PM | #80 |
aka Jack Wolfskin
|
Happy New Year
Hey, all BENELUX Yaris owners.
All the best wishes for the new year and many safe miles with you Yaris and that 2009 may bring a lot of nice mods to our cars. |
01-01-2009, 10:20 PM | #81 | |
Drives: Toyota Yaris XP9 Join Date: Nov 2008
Location: Yellow - Belgium
Posts: 56
|
Quote:
I wish you also all the best for 2009, and I hope that we can organize a meet & greet this year. |
|
01-02-2009, 07:49 PM | #82 | |
Quote:
I still don't get it why they make cars look like a buggy. |
||
01-03-2009, 09:04 AM | #83 |
Drives: Toyota Yaris 1.3 vvt-i Cool Join Date: Oct 2008
Location: Berkel en rodenrijs, the Netherlands
Posts: 37
|
Hey,
Zit al een tijdje op het forum maar zie nu pas het benelux gedeelte! Goed bezig! Zijn er nog Beneluxers die ook een 1.3 rijden? Zit er aan te denken om hem wat te verlagen. Hoeveel raden jullie aan? er liggen 16 inch velgen met 205/50 banden onder Hier 2 foto's van mijn Yaris 1.3 Cool + Sportpack + Ipod icelink |
01-03-2009, 10:29 AM | #84 |
aka Jack Wolfskin
|
Hey.
Met originele dempers zou ik nooit verder gaan dan 3 a 3,5 cm. Wil je niet dat je comfort veel minder wordt ga dan voor Eibach (als je de verlagingsveren van Toyota zelf neemt is dat ook Eibach) |
01-03-2009, 12:04 PM | #85 | |
Drives: Yaris 1.4 D-4D Join Date: Oct 2008
Location: Belgium
Posts: 75
|
Quote:
|
|
01-03-2009, 12:56 PM | #86 |
aka Jack Wolfskin
|
@Nico4960; Frappr works today
|
01-03-2009, 04:34 PM | #87 |
01-03-2009, 05:26 PM | #88 |
aka Jack Wolfskin
|
|
01-03-2009, 08:19 PM | #89 |
Drives: Yaris 1.4 D-4D Join Date: Oct 2008
Location: Belgium
Posts: 75
|
|
01-04-2009, 04:00 PM | #90 | |
Drives: Toyota Yaris 1.3 vvt-i Cool Join Date: Oct 2008
Location: Berkel en rodenrijs, the Netherlands
Posts: 37
|
Quote:
Wel vreemd dat de Eibach veren bij bv verlagins-veren.nl 171 euro kosten. en als je ze via toyota zou doen het 452 euro zou kosten. De Eibach veren zijn trouwens een verlaging van 2,5cm rondom, denk dat dat een mooie verlaging is. (niet te laag en niet te hoog). EDIT! Even een photoshop gemaakt van een verlaging van 2,5 cm! Staat super! VOOR NA Last edited by Burningbjorn; 01-04-2009 at 05:44 PM. |
|
|
|