Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Performance Modifications
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 06-17-2009, 10:45 AM   #73
cleong
Parallel Parking Pro
 
cleong's Avatar
 
Drives: Yaris 1.5 Manual
Join Date: Dec 2006
Location: Singapore
Posts: 590
Quote:
Originally Posted by 2bad4u View Post
The dyno result for 06 Vitz RS 5spd. only mod are a BroSpeed Bosal axle-back muffler and grounding kit (home made).
Max Power = 101.13 Max Torque 93.44
temp outside was 78F using 91 octane.
The dyno chart seems to suggest that the JDM Vitz RS has the same output as a regular 1.5 litre Yaris, reinforcing what the factory dyno charts show.

I think the Vitz RS TRD would be a bit more in hp and tq though.
__________________
Leong's NCP91 Toyota Yaris E
Hankook V12 Evo 195/55/15 on Buddy Club P1 replicas 15x7 ET +38
Stebel horns, Philips Silvervision turn indicator bulbs
TTE Lowering Springs, Camber bolts
TRD Blue brake pads
Fujitsubo Super Wagolis axleback exhaust
DC Sports header
cleong is offline   Reply With Quote
Old 07-22-2009, 10:46 PM   #74
changchewsoon
 
Drives: Vios Turbo
Join Date: Feb 2009
Location: Malaysia
Posts: 190
Send a message via MSN to changchewsoon Send a message via Yahoo to changchewsoon
fitted with okada project coils

no change in boost, plug and play coils.
Attached Images
File Type: jpg vios-turbo-dyno.jpg (138.0 KB, 905 views)
__________________
454 whp, 1.7 bar boost, pump gas, water/meth.
501 whp, 2.2 bar boost, pump gas + avgas, no water/meth.
www.viosturbo.com - World's first 500 WHP 1NZ-FE
changchewsoon is offline   Reply With Quote
Old 07-22-2009, 11:23 PM   #75
thebarber
daily driver
 
thebarber's Avatar
 
Drives: the #wrecho
Join Date: Jun 2006
Location: Grand Rapids, MI
Posts: 5,877
custom intake, 1zzfe throttle body, megan fart can, NST underdrive crank pulley

**a stock yaris on this dyno pulled 91.3whp**

__________________
thebarber is offline   Reply With Quote
Old 09-28-2009, 03:43 PM   #76
YarisPR
 
YarisPR's Avatar
 
Drives: Yaris Sedan
Join Date: Sep 2006
Location: MayaWest, Puerto Rico
Posts: 1,574
This Doesn't count!!

I've just downloaded the "Dynolicious" in my GF's Iphone, so we where having some fun with it. I know it's not accurate but its kinda fun . Never got to find a decent road . And my GF doesn't help... Me: "should I launch now?" GF: "you should have launched few seconds ago"

1st Run

2007 Toyota Yaris

Sep 27, 2009 11:44 PM

Acceleration
0-10 MPH: 1.00 sec
0-20 MPH: 2.39 sec
0-30 MPH: 3.73 sec
0-40 MPH: 5.77 sec
0-50 MPH: 7.95 sec
0-60 MPH: 10.39 sec
0-70 MPH: 14.25 sec

Elapsed Time
60': 2.94 sec @ 22.6 MPH
330': 7.75 sec @ 47.8 MPH
1/8 mi: 11.68 sec @ 62.5 MPH
1000': 15.08 sec @ 72.6 MPH
1/4 mi: 17.96 sec @ 78.2 MPH

Miscellaneous
Max Speed: 79.3 MPH
Max Acceleration: 0.47 G's
Peak Horsepower: 105 HP

2nd Run

Sep 27, 2009 11:48 PM
Acceleration
0-10 MPH: 3.30 sec
0-20 MPH: 4.40 sec
0-30 MPH: 6.02 sec
0-40 MPH: 8.04 sec
0-50 MPH: 10.24 sec
0-60 MPH: 13.45 sec
0-70 MPH: 17.05 sec

Elapsed Time
60': 5.25 sec @ 25.1 MPH
330': 10.04 sec @ 47.8 MPH
1/8 mi: 14.06 sec @ 61.6 MPH
1000': 17.52 sec @ 71.3 MPH
1/4 mi: 20.42 sec @ 78.2 MPH

Miscellaneous
Max Speed: 78.4 MPH
Max Acceleration: 0.49 G's
Peak Horsepower: 107 HP
__________________
I Drive a 129whp Yaris ;)
YarisPR is offline   Reply With Quote
Old 10-10-2009, 03:13 PM   #77
ozmdd
Reluctantly Crouched...
 
ozmdd's Avatar
 
Drives: 2008 Yaris HB M/T
Join Date: Oct 2008
Location: DFW, TX
Posts: 867
OK, got some hard data for y'all. Frownonfun and I both did a dyno day this morning, and the conditions were nice. We did this on a Mustang AWD dyno, so the tech told us we're probably a few percent higher than this dyno shows, but close enough.

I'll post the scans of the sheets later.

OZMDD - 107 WHP / 106 TQ, AFR -12.6. Also, 76 deg F air temp (at the intake, according to the SGII) [TRD CAI w/ bypass fitting removed and replaced with coupler, Thunder axle-back exhaust, NST 10% UD Lyte pulley.]

FROWNONFUN had 145 WHP from the S/C setup we installed a few weeks ago, and that's with stock tuning (piggyback) and no other mods besides axle-back and NST Alt pulley!! I believe that's around 6 lbs boost.
ozmdd is offline   Reply With Quote
Old 10-10-2009, 04:26 PM   #78
cali yaris
ULTIMATE
 
cali yaris's Avatar
 
Drives: 07 Yaris Turbo
Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
Send a message via AIM to cali yaris
nice! looking forward to the graphs
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.
cali yaris is offline   Reply With Quote
Old 10-10-2009, 04:59 PM   #79
lilredrocket
Slowy getting there
 
lilredrocket's Avatar
 
Drives: 08 Liftback
Join Date: Nov 2008
Location: DFW, Texas
Posts: 1,464
ozmdd that alt pulley cam with the s/c so you can run the belt for the s/c. I believe frownonfun's afr was around 11.3 and the guys running the dyno did the math and said the HP number should be around 147-150hp and no CEL's
__________________
lilredrocket is offline   Reply With Quote
Old 10-10-2009, 05:25 PM   #80
thebarber
daily driver
 
thebarber's Avatar
 
Drives: the #wrecho
Join Date: Jun 2006
Location: Grand Rapids, MI
Posts: 5,877
145whp is impressive on the rotrex

i still want dyno charts though!
__________________
thebarber is offline   Reply With Quote
Old 10-10-2009, 07:16 PM   #81
PETERPOOP
 
PETERPOOP's Avatar
 
Drives: 08 white liftback
Join Date: Oct 2008
Location: Oahu
Posts: 3,674
niceeeeee! i'm jealous

i knew it had more power than the blitz when i saw the video of it taking off with a passenger inside. can't you put an intercooler on that kit too and get an advertised 150whp with it. Since he's getting 145whp as of now, that intercooler could maybe take him to 155 + whp. I believe the kit only advertised that it puts down 140whp; so you already have a good thing going!

Now get a headerback exhaust setup. ;)
PETERPOOP is offline   Reply With Quote
Old 10-10-2009, 11:11 PM   #82
lilredrocket
Slowy getting there
 
lilredrocket's Avatar
 
Drives: 08 Liftback
Join Date: Nov 2008
Location: DFW, Texas
Posts: 1,464
He has a custom axle back. but thats it for exhaust when I was talking with him today and tole him he needs to get a header and showed him where he could cut for to put in an intercooler. Also this kit can be used with the intake mani that Garm is developing. I also told him that after he gets an intercooler he could talk to Mike at NST and have him make a smaller pulley to get some more boost out of the kit. The guy also just bought some 2zz injectors just to be on the safe side.
__________________
lilredrocket is offline   Reply With Quote
Old 10-10-2009, 11:17 PM   #83
lilredrocket
Slowy getting there
 
lilredrocket's Avatar
 
Drives: 08 Liftback
Join Date: Nov 2008
Location: DFW, Texas
Posts: 1,464
Hey Peter one of the first times I went to Mike's shop I was talking with him about the Blitz kit and if he could make a pulley for the kit and he said he had a few options and after looking around some he ruled out one of them.

1.) make an overdrive pulley for the crank (ruled out pulley would be to close to another)

2.) make a fixed pulley for the blitz and probably through a cel and take away the option of turning the s/c off and on.

3.) make a clutched pulley and and still be able to run the s/c like normal. I think he said he could do this for about $500 or so price but worth it if you want to use you the on/off function
__________________
lilredrocket is offline   Reply With Quote
Old 10-11-2009, 02:56 AM   #84
PETERPOOP
 
PETERPOOP's Avatar
 
Drives: 08 white liftback
Join Date: Oct 2008
Location: Oahu
Posts: 3,674
Quote:
Originally Posted by lilredrocket View Post
Hey Peter one of the first times I went to Mike's shop I was talking with him about the Blitz kit and if he could make a pulley for the kit and he said he had a few options and after looking around some he ruled out one of them.

1.) make an overdrive pulley for the crank (ruled out pulley would be to close to another)

2.) make a fixed pulley for the blitz and probably through a cel and take away the option of turning the s/c off and on.

3.) make a clutched pulley and and still be able to run the s/c like normal. I think he said he could do this for about $500 or so price but worth it if you want to use you the on/off function
Hey i've explored all these options. I messaged NST about making an overdrive crank pulley with a smaller water pump pulley (that is the pulley your friend is talking about). NST sounded grateful for the information, but I doubt they will develop anything.

2. Garm is looking into making a smaller fixed pulley without the option of turning on/off

3. Yah, this is the most expensive option, however might be worth it. PM me more about that..
PETERPOOP is offline   Reply With Quote
Old 10-11-2009, 04:31 PM   #85
lilredrocket
Slowy getting there
 
lilredrocket's Avatar
 
Drives: 08 Liftback
Join Date: Nov 2008
Location: DFW, Texas
Posts: 1,464
Just ask Mike at NST. He also makes one off pulleys that why they are so much too. The reason they won't develpoe it is because there is not a big enough market for it you know?
__________________
lilredrocket is offline   Reply With Quote
Old 10-11-2009, 04:51 PM   #86
frownonfun
 
frownonfun's Avatar
 
Drives: 09 Yaris HB, 08 SR5 Tundra
Join Date: Jan 2009
Location: RGV, Texas
Posts: 1,086
Quote:
Originally Posted by PETERPOOP View Post
niceeeeee! i'm jealous

i knew it had more power than the blitz when i saw the video of it taking off with a passenger inside. can't you put an intercooler on that kit too and get an advertised 150whp with it. Since he's getting 145whp as of now, that intercooler could maybe take him to 155 + whp. I believe the kit only advertised that it puts down 140whp; so you already have a good thing going!
Quote:
Originally Posted by ozmdd View Post
FROWNONFUN had 145 WHP from the S/C setup we installed a few weeks ago, and that's with stock tuning (piggyback) and no other mods besides axle-back and NST Alt pulley!! I believe that's around 6 lbs boost.
to be fair i also have a kyle busch license plate frame for my back plate. could account for the extra hp.


also i'll put an intercooler in when garm finishes that hood from the contest. and if garm still has a few dc sports headers in stock on friday i'll be picking one of those up too.
__________________


I crush you like tiny clown car, because you are clown, yes?
frownonfun is offline   Reply With Quote
Old 10-11-2009, 07:17 PM   #87
PETERPOOP
 
PETERPOOP's Avatar
 
Drives: 08 white liftback
Join Date: Oct 2008
Location: Oahu
Posts: 3,674
Quote:
Originally Posted by lilredrocket View Post
Just ask Mike at NST. He also makes one off pulleys that why they are so much too. The reason they won't develpoe it is because there is not a big enough market for it you know?
.....

I am aware of this and I ALREADY have spoken to him. The overdrive crank pulley and smaller water pulley would have been custom made for me and I would have paid for the expense to make them. However, he seems to not want the business, so screw it. So why bother him with a clutch pulley when he won't make me the overdrive crank and smaller water pulley. Know what i'm saying?
PETERPOOP is offline   Reply With Quote
Old 10-11-2009, 10:32 PM   #88
lilredrocket
Slowy getting there
 
lilredrocket's Avatar
 
Drives: 08 Liftback
Join Date: Nov 2008
Location: DFW, Texas
Posts: 1,464
I'm sure if you seemed really interested he would make them for you call him and ask no harm in asking again
__________________
lilredrocket is offline   Reply With Quote
Old 10-11-2009, 10:45 PM   #89
Sabretooth
37HSSV
 
Sabretooth's Avatar
 
Drives: '11 Mazdaspeed 3
Join Date: Jan 2007
Location: St Cloud FL
Posts: 1,395
Send a message via AIM to Sabretooth
Well if everyone on board with the Blitz kits would want one, I asssume the price would come down if he was able to make 5-10 pulleys and sell them over time instead of 1 piece.
__________________
07 Toyota Yaris Hatchback -sold-
11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP-
Clean stock look... Killer performance.
Sabretooth is offline   Reply With Quote
Old 10-12-2009, 10:12 AM   #90
ozmdd
Reluctantly Crouched...
 
ozmdd's Avatar
 
Drives: 2008 Yaris HB M/T
Join Date: Oct 2008
Location: DFW, TX
Posts: 867
Quote:
Originally Posted by PETERPOOP View Post
.....

I am aware of this and I ALREADY have spoken to him. The overdrive crank pulley and smaller water pulley would have been custom made for me and I would have paid for the expense to make them. However, he seems to not want the business, so screw it. So why bother him with a clutch pulley when he won't make me the overdrive crank and smaller water pulley. Know what i'm saying?
Guys... nothing wrong with either of your comments, but maybe start a thread for it? the dyno charts are kinda getting lost among the debate.
ozmdd is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW VitzBoy General Yaris / Vitz Discussion 7 09-20-2023 07:50 AM
News : 2007 Toyota Yaris - the little Euro's official arrival VitzBoy General Yaris / Vitz Discussion 9 06-06-2017 12:51 AM
WR Yaris Intake Picture & Dyno. WRLEO Performance Modifications 37 04-05-2007 07:02 PM
WR INTAKE SYSTEM : YOU GET $100 FOR DYNO RESULTS ! WRLEO Sponsors Classifieds Area 0 02-22-2007 10:14 AM


All times are GMT -4. The time now is 08:17 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.