Yaris Dyno charts - Page 6 - Toyota Yaris Forums

PETERPOOP · 10-12-2009, 01:34 PM

Quote:

Originally Posted by lilredrocket

I'm sure if you seemed really interested he would make them for you.

WRONG. lol

Quote:

Originally Posted by Sabretooth

Well if everyone on board with the Blitz kits would want one, I asssume the price would come down if he was able to make 5-10 pulleys and sell them over time instead of 1 piece.

Yes. Mike and I are both aware of this. I would fork out the dough to pay for the custom made pulleys and let him know if everything worked out. I would dyno my car and show the results and would provide the info on how much more lbs of boost I am getting. If everything was good, he would probably make a TWO-pulley supercharger set (overdrive crankpulley/smaller waterpump pulley) and sell them as that. He could make some decent money off of that and I am sure a lot of blitz owners would purchase it. However, he does not seem interested in making me the overdrive crank pulley/smaller water pump pulley anymore (like i've already stated in this thread) and the project is in the can.

Sabretooth · 10-11-2009, 11:45 PM

Well if everyone on board with the Blitz kits would want one, I asssume the price would come down if he was able to make 5-10 pulleys and sell them over time instead of 1 piece.

lilredrocket · 10-12-2009, 01:13 PM

Speaking of dyno charts where is yours? Also frownonfun needs to post his too!!

ozmdd · 10-12-2009, 01:23 PM

Scanning today. My home scanner wasn't cooperating. :)

lilredrocket · 10-12-2009, 01:31 PM

Oh ok...

lilredrocket · 10-12-2009, 01:54 PM

Why are you stuck on an overdrive crank pulley? Why not an underdrive s/c pulley? Did he say he was not interested? He told me that he would need someone witht the s/c there to do some testing and such. Why dont you start up a GI thread for it to show Mike how many people are interested in it? He is a busy guy why not try and help him out?

PETERPOOP · 10-12-2009, 01:59 PM

So I can keep my on/off function? He said he was interested and would do it for me. He did not say anything about needing someone with a blitz kit there to be able to make the pulley. Him making me the pulleys DID NOT require a GI thread, since I would be paying whatever cost was needed to make MY pulleys (for the 1000x). lmao.

You just don't stop, do you?

/end

*Mods: clean up this thread. thanks

lilredrocket · 10-12-2009, 03:03 PM

It's really funny how you want this and don't do any follow up on it.

PETERPOOP · 10-12-2009, 03:33 PM

It's really funny how you have no idea what you're talking about.

ozmdd · 10-12-2009, 03:53 PM

OK, here it is:

I know the numbers are pretty faint, but the scale on the left is HP and Torque, with an increment of 15, starting at 50, up to 200.

Edit: Actually, totally unreadable once posted. I'll have to do a greyscale scan and repost.

Still, it says: Max Torque (ft-lbs) 106 (@4000rpm)
Max HP - 107 (@5900rpm)
Max AFR - 12.6 (@3300rpm)

HP and TQ cross-over at 5200rpm, right around 105 each.

The torque curve is the middle one (blue), and is remarkably flat. :)

lilredrocket · 10-12-2009, 04:25 PM

Glad you got it up!!

ozmdd · 10-12-2009, 05:22 PM

Quote:

Originally Posted by lilredrocket

Glad you got it up!!

TWSS!

thebarber · 10-12-2009, 05:28 PM

would be helpful to list mods in your post too...

ozmdd · 10-12-2009, 10:56 PM

OK, here is the darkened scan.

Relevant mods:
NST 10% UD CR-lite pulley
Thunder Axle-back Exhaust
TRD CAI w/ WeaponR Secret Weapon dry element filter (also, bypass coupler replaced w/ plain coupler.)

Air Temp: 78*F (@ intake, according to SGII)
Relative Humidity: 77%
Bar. Pressure: 30.20 inches (steady)

frownonfun · 10-14-2009, 12:53 AM

cali yaris · 10-14-2009, 03:21 AM

nice!

lilredrocket · 10-14-2009, 12:39 PM

To bad the guy printed off your lowest pull

thebarber · 10-18-2009, 08:28 AM

dynojet dyno - -106.1whp and 107.1 wtq with intake, after-resonator exhaust and 87 octane, no other mods

10-11-2009, 11:45 PM	#2
Sabretooth 37HSSV View User's Garage Drives: '11 Mazdaspeed 3 Join Date: Jan 2007 Location: St Cloud FL Posts: 1,395	Well if everyone on board with the Blitz kits would want one, I asssume the price would come down if he was able to make 5-10 pulleys and sell them over time instead of 1 piece. __________________ 07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance.

10-12-2009, 01:13 PM	#3
lilredrocket Slowy getting there View User's Garage Drives: 08 Liftback Join Date: Nov 2008 Location: DFW, Texas Posts: 1,464	Speaking of dyno charts where is yours? Also frownonfun needs to post his too!! __________________

10-12-2009, 01:31 PM	#5
lilredrocket Slowy getting there View User's Garage Drives: 08 Liftback Join Date: Nov 2008 Location: DFW, Texas Posts: 1,464	Oh ok... __________________

10-12-2009, 01:54 PM	#6
lilredrocket Slowy getting there View User's Garage Drives: 08 Liftback Join Date: Nov 2008 Location: DFW, Texas Posts: 1,464	Why are you stuck on an overdrive crank pulley? Why not an underdrive s/c pulley? Did he say he was not interested? He told me that he would need someone witht the s/c there to do some testing and such. Why dont you start up a GI thread for it to show Mike how many people are interested in it? He is a busy guy why not try and help him out? __________________

10-12-2009, 03:03 PM	#8
lilredrocket Slowy getting there View User's Garage Drives: 08 Liftback Join Date: Nov 2008 Location: DFW, Texas Posts: 1,464	It's really funny how you want this and don't do any follow up on it. __________________

10-12-2009, 01:23 PM	#4
ozmdd Reluctantly Crouched... Drives: 2008 Yaris HB M/T Join Date: Oct 2008 Location: DFW, TX Posts: 867	Scanning today. My home scanner wasn't cooperating. :)

10-12-2009, 01:59 PM	#7
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	So I can keep my on/off function? He said he was interested and would do it for me. He did not say anything about needing someone with a blitz kit there to be able to make the pulley. Him making me the pulleys DID NOT require a GI thread, since I would be paying whatever cost was needed to make MY pulleys (for the 1000x). lmao. You just don't stop, do you? /end *Mods: clean up this thread. thanks

10-12-2009, 03:33 PM	#9
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	It's really funny how you have no idea what you're talking about.

10-12-2009, 04:25 PM	#11
lilredrocket Slowy getting there View User's Garage Drives: 08 Liftback Join Date: Nov 2008 Location: DFW, Texas Posts: 1,464	Glad you got it up!! __________________

10-12-2009, 05:28 PM	#13
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	would be helpful to list mods in your post too... __________________

10-12-2009, 10:56 PM	#14
ozmdd Reluctantly Crouched... Drives: 2008 Yaris HB M/T Join Date: Oct 2008 Location: DFW, TX Posts: 867	OK, here is the darkened scan. Relevant mods: NST 10% UD CR-lite pulley Thunder Axle-back Exhaust TRD CAI w/ WeaponR Secret Weapon dry element filter (also, bypass coupler replaced w/ plain coupler.) Air Temp: 78*F (@ intake, according to SGII) Relative Humidity: 77% Bar. Pressure: 30.20 inches (steady)

10-14-2009, 12:53 AM	#15
frownonfun View User's Garage Drives: 09 Yaris HB, 08 SR5 Tundra Join Date: Jan 2009 Location: RGV, Texas Posts: 1,086	__________________ I crush you like tiny clown car, because you are clown, yes?

10-14-2009, 03:21 AM	#16
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	nice! __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

10-14-2009, 12:39 PM	#17
lilredrocket Slowy getting there View User's Garage Drives: 08 Liftback Join Date: Nov 2008 Location: DFW, Texas Posts: 1,464	To bad the guy printed off your lowest pull __________________

10-18-2009, 08:28 AM	#18
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	dynojet dyno - -106.1whp and 107.1 wtq with intake, after-resonator exhaust and 87 octane, no other mods __________________ Last edited by thebarber; 10-18-2009 at 01:14 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
News : 2007 Toyota Yaris - the little Euro's official arrival	VitzBoy	General Yaris / Vitz Discussion	9	06-06-2017 01:51 AM
WR Yaris Intake Picture & Dyno.	WRLEO	Performance Modifications	37	04-05-2007 08:02 PM
WR INTAKE SYSTEM : YOU GET $100 FOR DYNO RESULTS !	WRLEO	Sponsors Classifieds Area	0	02-22-2007 11:14 AM