gude-head-1NZ-FE

[Bluevitz-rs]

Updates?

[cali yaris]

"in the process" means you've ordered it and paid a deposit?

This should be a very nice addition to your build.

[xbgod]

Yes it's been paid. Just a wait and see game now. I will not have mine tuned untill sometime in Nov. I've changed alot of stuff on my car so lots of things going on right now. As well as getting my appointment at CFT and Rolo to tune it; he's always slammed with work so it's my first oportunity to tune.

Two other things on my head that I didn't mention. I'm using Ferrera valves and the cams are 114 on centers.

I've done so much motor upgades, it's gonna be interesting to see the out come.

All I know is that I hope this new turbo / head upgrade pays off.

XBG

[sleey0]

Well, when your neck snaps in half going WOT, due to all your upgrades, that grin you crack will be sooo worth it:D

[xbgod]

Here are some attachments of my engine bay as it stands right now. Pardon the mess but you get the idea. Got stuff coming and going in and out so nothing has been tightened up or wires hidden yet. This is just to give you guys an idea of what I'm doing

XBG

[Parmas]

Nice setup man you should done much custom work on this!

Why don't you begin a thread regarding your setup instead of posting into other's thread?

[xbgod]

Suppose I could. didn't know how much posting I was going to do here but we do have one thing in common with these cars and thats the motor. I'll start a thread on this build and continue with updates on my head as they become available.

I think everyone is courious about how these heads will turn out.

XBG

[sito]

Nice setup, xbgod....

[xbgod]

H3Llion, I see you got your head package. courious how every thing looked to you as you opened it and inspected it. Also did you choose to put the head all back together your self? or just didn't want Bill to do it?

I'm making him assemble mine so I know that all the tolorance's are correct between the cams and the buckets.

I would imagine he preassembled yours to check all that but let me how all your stuff turns out.

XBG

[xbgod]

H3Llion,

Haven't heard from you about your head and cams. I hope your not the one that Bill said took it all apart and can't get it back together with the right specs. Courious to see how your's is doing

XBG

[H3LlIoN]

Originally Posted by xbgod

H3Llion, I see you got your head package. courious how every thing looked to you as you opened it and inspected it. Also did you choose to put the head all back together your self? or just didn't want Bill to do it?

I'm making him assemble mine so I know that all the tolorance's are correct between the cams and the buckets.

I would imagine he preassembled yours to check all that but let me how all your stuff turns out.

XBG

You'll still have to break it down in order to get it in. The bolts securing the head are directly under the cams. You should know this. As far as clearances, I took the head package to the guy installing it for me who's been working on cars in one capacity or another for about 30 years. He called me a couple days later and said "Holy shit. Whoever did this knew EXACTLY what they were doing."

[cali yaris]

^ I have cams coming in now from overseas, after a year's R&D. I'll post up when they come in.

Three set ups will be available: street, N/A tuned and turbo.

[xbgod]

Sounds good. But you try the first set. You will also need springs with those cams. You may try Eibach, I know gude buys them by the 1000 from them.

Or even Ferrea they make sets for these now.

I'm not a big fan of overseas manufacturing,,,,China....ect. So I hope you have a reliable source.

I've out sourced before and should have just kept it in house or bit the bullet and had Brian do it.

XBG

[Nexus1155]

Crower makes some great stuff.

I am a big fan of overseas manufacturing depending on some things. After all everything comes from China anyways! The only thing I hate about it is that it IS killing our manufacturing economy.

Ferrea valves are ridiculously expensive. Really $1000+ for the kit for a 4cylinder. Even if i had the cash, I still wouldn't drop that much. I know the crowd and aftermarket is there, but look at the SR20DET crew, a similar kit goes for like ~$300

[xbgod]

Yeah...Brian Crower...(great friend)

And untill the 1NZ-FE motor picks-up popularity internal parts will be pricy. As a manufacture anything less than a run of 500 is useless and cost prohibited. I would never run some cheap -ass china built crap on a 20K motor.

Ferrea ....expensive...yes, but made and tested here in America,on cmm machines to exacting tollerences. That stuff in China half the time is made friday at five-oclock just before beer-thirty.

Never go cheap on your motor, especially internals....it's the heart of your motor.

XBG

[Nexus1155]

Exactly, it is a waste of time and resources for someone like him. Even if the 1nz-fe is in alot of cars, they're not all tuners and doubtful alot will put headwork into it.

Yes, you are right, I would not try to cheap out, I have seen some terrible crap made in China... terrible, but part of the China hype is to shop around and find someone who does good work. Hard, but doable. We run rods(same weight and spec that we measured and stress tested) in our S4's that atleast 3 legit companies market as "American" made, handle up to 850hp and has been going strong for 5 years so far. This is one of the instance when China is somewhat acceptable.

But I mean at what cost, it took combing through companies and blowing rods out to find out what works best!? Not worth it IMHO on something like that

Simple things like exhaust, is alright. Even if it is sub par metal, it works excellent.

[cali yaris]

Sounds good. But you try the first set. You will also need springs with those cams.

I always do.

[xbgod]

Keep in mind you will need custom ground buckets and springs for those cams.

the stock springs have about zero tollerence for play room.

Or you could do custom valve lengths and not need the buckets and springs.

Good luck. Keep me posted.

XBG