My 2011 Vitz - Page 8 - Toyota Yaris Forums

TerenceCruz · 03-24-2014, 06:18 PM

Quote:

Originally Posted by febriandp

whats your plans on the wheels? oh yeah and you should get Fortune Auto 500 coilovers dude! I think they offer some serious drop (they are the one who made Broadway Static coils)

and IMO keep it clean, dont murder it out haha, and peel the tint haha

Those are expensive though.. :( After I get my coils I plan on going with 16x9 BBS RS reps..

These right here are 15x8. But these are the wheels I want. (I hope they make these in 16x9) I just put the wheel in front of my wheels.

TerenceCruz · 03-24-2014, 06:41 PM

^^ Other BBS RS reps are made by other manufacturers of course but I really like the black hardware on these. Lol. I might just paint the bolts if I get the other ones hahaha. Like these for example. 16x9 +15 :O

1.5 · 03-25-2014, 01:50 PM

Those are perfect man ^^^

I was joking about murdering it out lol i am not a fan, I agree with Febrian to peel tint and do black on silver. I also wish I would have gotten the Fortune Auto Coils but I didnt know they existed and yes they are quite a bit more than the megans

TerenceCruz · 03-25-2014, 05:14 PM

Quote:

Originally Posted by 1.5

Those are perfect man ^^^

I was joking about murdering it out lol i am not a fan, I agree with Febrian to peel tint and do black on silver. I also wish I would have gotten the Fortune Auto Coils but I didnt know they existed and yes they are quite a bit more than the megans

Haha I figured man!! I have no tint in my front two windows but I like the tint everywhere else. With the 16x9 I will go 195/45. It's just so hard to save up for the coils and wheels. There's always "something" I need to buy.. Lol.

ezhacker1 · 03-27-2014, 06:59 AM

Quote:

Originally Posted by TerenceCruz

With the 16x9 I will go 195/45.

Dang, stretch
http://www.tyrestretch.com/9.0_195_45_R16/

TerenceCruz · 03-27-2014, 12:59 PM

Quote:

Originally Posted by ezhacker1

Dang, stretch
http://www.tyrestretch.com/9.0_195_45_R16/

Yesss haha. Idk yet though.. We'll see how it goes haha.

TerenceCruz · 03-25-2014, 05:17 PM

Only lower cause I had some people in the car.. Hahaha I can't wait to go lower than that.

TerenceCruz · 03-25-2014, 10:10 PM

Ordering my Megan coils tomorrow! Thinking about slamming it and putting the hubcaps on.. Idk if I should or not yet. Lol. Anyone have pics of a liftback slammed on steelies with hubcaps?

TerenceCruz · 03-26-2014, 05:16 PM

Coils have been ordered :) Next picture posted will be with them on!

Ecogeek · 03-26-2014, 09:29 PM

I feel dirty waiting for the pics... looking forward to it!

TerenceCruz · 03-27-2014, 03:27 AM

Quote:

Originally Posted by Ecogeek

I feel dirty waiting for the pics... looking forward to it!

This made me crack up. Haha I'll be sure to update this asap!

MiSFiTx87 · 03-27-2014, 02:40 AM

what will you with your current suspension set up?

TerenceCruz · 03-27-2014, 03:27 AM

Quote:

Originally Posted by MiSFiTx87

what will you with your current suspension set up?

It's going on my little cousins liftback man. We have 5 yarii in the family.. So far.. Haha!

MiSFiTx87 · 03-27-2014, 03:54 AM

Quote:

Originally Posted by TerenceCruz

It's going on my little cousins liftback man. We have 5 yarii in the family.. So far.. Haha!

nice thats a family

any rubbing when it was just you in the car with the s techs and the rear spacers?

TerenceCruz · 03-27-2014, 04:29 AM

Quote:

Originally Posted by MiSFiTx87

nice thats a family

any rubbing when it was just you in the car with the s techs and the rear spacers?

Haha right? And as of right now, with my steelies I'm getting no rubbing in the front or rear. Even with people in the back. I felt a good amount of rubbing in the rear when I had the Enkeis + spacers though. They were 15x7 +41. With the spacers it was +31.

1.5 · 03-27-2014, 02:07 PM

Nice I thought that was you really on Coilovers lol. Dude f**k the hub caps grab the bbs reps lol. Cant wait for the actual official pics

195/45 on 9" is nothing to worry about lol Its a perfect stretch.

TerenceCruz · 03-27-2014, 02:59 PM

Quote:

Originally Posted by 1.5

Nice I thought that was you really on Coilovers lol. Dude f**k the hub caps grab the bbs reps lol. Cant wait for the actual official pics

195/45 on 9" is nothing to worry about lol Its a perfect stretch.

Hahaha not just yet man! And I wish I could get them already but I'm in a little hole cause of these coilovers. Lol It will be worth it when I'm finally living the low life again! Haven't been slammed since I had my EG8. 4DoorsForMoreWh**res ;)

febriandp · 04-07-2014, 02:26 AM

Quote:

Originally Posted by 1.5

Nice I thought that was you really on Coilovers lol. Dude f**k the hub caps grab the bbs reps lol. Cant wait for the actual official pics

195/45 on 9" is nothing to worry about lol Its a perfect stretch.

yup agree with you haha, its a perfect stretch.. this was 195/45 on 9" (my previous setup)

03-25-2014, 01:50 PM	#3
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	Those are perfect man ^^^ I was joking about murdering it out lol i am not a fan, I agree with Febrian to peel tint and do black on silver. I also wish I would have gotten the Fortune Auto Coils but I didnt know they existed and yes they are quite a bit more than the megans __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

03-27-2014, 02:07 PM	#16
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	Nice I thought that was you really on Coilovers lol. Dude f**k the hub caps grab the bbs reps lol. Cant wait for the actual official pics 195/45 on 9" is nothing to worry about lol Its a perfect stretch. __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2010 Vitz RS Modellista Completed Car	Vitz Rs Modellista	Photo-Video-Media Gallery	38	11-18-2014 01:25 PM
2012 Vitz from the 2011 Tokyo Auto Salon	CTScott	Third Gen Yaris General Discussion	14	02-10-2011 09:06 AM
Is UA-NCP13 1.5L Manual Trans a Vitz RS?	WesSunday	General Yaris / Vitz Discussion	1	11-28-2010 11:47 AM
Newly refreshed 2011 Toyota Corolla	Kal-El	Off-topic / Other Cars / Everything else Discussions	23	11-27-2010 01:57 PM
A German Yaris/Vitz/Echo ;)	we-to-11	Photo-Video-Media Gallery	5	06-27-2007 09:26 PM

03-24-2014, 06:41 PM	#2
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	^^ Other BBS RS reps are made by other manufacturers of course but I really like the black hardware on these. Lol. I might just paint the bolts if I get the other ones hahaha. Like these for example. 16x9 +15 :O

03-25-2014, 05:17 PM	#7
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Only lower cause I had some people in the car.. Hahaha I can't wait to go lower than that.

03-25-2014, 10:10 PM	#8
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Ordering my Megan coils tomorrow! Thinking about slamming it and putting the hubcaps on.. Idk if I should or not yet. Lol. Anyone have pics of a liftback slammed on steelies with hubcaps?

03-26-2014, 05:16 PM	#9
TerenceCruz Drives: 2011 Toyota Yaris Join Date: Feb 2013 Location: Cali Posts: 725	Coils have been ordered :) Next picture posted will be with them on!

03-26-2014, 09:29 PM	#10
Ecogeek Drives: 2008 Yaris Join Date: Feb 2014 Location: Midwest Posts: 25	I feel dirty waiting for the pics... looking forward to it!

03-27-2014, 02:40 AM	#12
MiSFiTx87 Drives: CS1 Join Date: Mar 2013 Location: 661 SoCal Posts: 107	what will you with your current suspension set up?