|
02-27-2011, 02:30 PM | #145 |
Drives: 2007 HB Yaris Join Date: Dec 2010
Location: Oshkosh WI
Posts: 6
|
Well we just finished installing the cruise control. It took a total of 2 1/2 hours including the test drive. It probably would have taken less but we triple checked everything. Can't be too careful.
eBay stalk $30 with shipping Wires from Scott with the correct ends $10 (but really priceless also) Saving $360 and doing it ourselves. Priceless Thanks to everyone here on YW for sharing all you learn. |
03-01-2011, 08:00 AM | #146 |
Drives: 2010 Yaris sedan black Join Date: Feb 2011
Location: Littleton, Co
Posts: 2
|
Ok, picked up my new 2010 Yaris sedan yesterday with no power package. What Toyota part #s do I need to install factory CC with the stalk on the column? I read through these 9 pages and now my head hurts and I feel confused! Any help would be great.
Thanks Dan |
03-01-2011, 08:19 AM | #147 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
For your 2010 you should just need the Stalk (84632-34011), stalk wire (84633-02020), and mounting screws(90159-50199 {quantity 2}). If you want the precut hole for the stalk, rather than drilling the plastic cover, you will also need the lower boss (45184-52130-B0).
__________________
|
|
03-01-2011, 08:34 AM | #148 |
Drives: 2010 Meteorite Liftback Join Date: Nov 2010
Location: Myrtle Beach, SC USA
Posts: 53
|
http://www.trdsparks.com/displaypart...&parts_id=2306
pretty cheap stalk & wire combo. for the screws just get some from hardware store I believe they're M5 x 0.8 , same as xbox 360 heatsink |
03-01-2011, 09:07 AM | #149 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
__________________
|
|
03-01-2011, 09:09 AM | #150 |
Drives: 2010 Meteorite Liftback Join Date: Nov 2010
Location: Myrtle Beach, SC USA
Posts: 53
|
how long have you had those? I could've used an awesome deal like that last year!
|
03-01-2011, 10:11 AM | #151 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
About two months ago a friend of mine got me a few at dealer cost.
__________________
|
03-01-2011, 01:17 PM | #152 |
Drives: 2010 Yaris sedan black Join Date: Feb 2011
Location: Littleton, Co
Posts: 2
|
|
03-01-2011, 02:05 PM | #153 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
__________________
|
03-09-2011, 10:54 AM | #154 |
Drives: Yaris LB 2008 Join Date: Nov 2010
Location: ATL, GA
Posts: 3
|
I have been really busy and did not have any chance to install my cruise control since I bought my OEM stalk from ebay (like months ago). I finally find a weekend to do this thing. I just want to make sure I get the set-up right before I break into my car.
I have a 2008 LB Yaris. 1. I first cut off the red+black wire clip at the end of the stalk 2. I see the "Spiral Connector Repair Terminals" in the parts requirement. I wonder if I really need it, if I treat the stalk = diy switch/button. Can I hook it up like in Fig. 1? 3. I think I will get "ECM repair terminal" for Pin 40. I know CTScott sells them. Since I finally find a free weekend to do it, I need that part sooner. So, I wonder if I can buy that from Toyota Dealership and get it on the same day? Or can I just get one from the junk yard? Or if Advanced Auto / Auto zone / radioshack sell them?? I am just afraid if I don't do it this weekend, it will be months after I can do it again. 4. I thought about just insert the wire into Pin 40. But, I am scared it will not be secured. How far do I need to insert the wire into the A21 ECM? Does the ECM terminal has some clip to hold all the wires in place? Anyone here did it without the "repair pin"?? Thanks again for all the help!! |
03-09-2011, 11:30 AM | #155 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
1/2. You don't really want to clip the connector. If you are planning on mounting the stalk in the steering wheel, then it needs to go through the spiral cable. 3. If you want to use the pins, I can ship them today via priority mail for $5 more (bringing the total to $15 for the three pins), so you would have them in hand before the weekend. I believe that the dealer price on them is $12 each, so you would still be saving quite a bit, and I don't think that dealers typically stock them. 4. People have done it this way, but it does not always make good connection and is not sealed, so it will allow moisture to enter the connector.
__________________
|
|
03-14-2011, 12:23 AM | #156 |
Drives: yaris Join Date: Mar 2011
Location: China
Posts: 4
|
hi guys, i am from China, I own an Yaris made by Toyota China. Does anyone here know if the China version Yaris can install the cruise control or not? People here say the ECU doesn't support. tks
|
03-14-2011, 06:42 AM | #157 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
I don't have any of the wiring diagrams or manuals for the Chinese Yaris, but as far as I know, only the US/Canada 1.5L Yaris ECMs have it built in.
__________________
|
03-14-2011, 08:42 AM | #158 | |
Drives: yaris Join Date: Mar 2011
Location: China
Posts: 4
|
Quote:
Is there an CC indicatior light showing on dash board after installation? The Chinese version uses 1.6L Dual-vvti engine, toyota model no. 1ZR-FE. 4AT transimission (U340E). the dash board looks different, see picture following if you can: The Chinese Yaris is the only Yaris model using 1.6L dual vvti engine in this world, so the ECM and ECU must be different ??? This engine also applies on Chinese Corollla. But anyway I will give it a try after my gurantee expires by following your approach, which probably will happen at the end of this year. |
|
03-14-2011, 08:52 AM | #159 | |
Drives: yaris Join Date: Mar 2011
Location: China
Posts: 4
|
Quote:
BTW, do you have any file that records installing the CC by using original Toyota parts stalk& wire in detail with pics?? tks. |
|
03-14-2011, 08:57 AM | #160 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Look at the first page of this thread for links that show the installation of the OEM cruise stalk. From your pictures, you don't have the 1NZ-FE engine, which as far as I know, is the only one which has the ECM preprogrammed for cruise control.
__________________
|
03-14-2011, 09:03 AM | #161 |
Drives: yaris Join Date: Mar 2011
Location: China
Posts: 4
|
ECU Relay |
03-18-2011, 08:29 PM | #162 | |
Drives: 08 Sedan Join Date: Oct 2008
Location: Toronto
Posts: 301
|
Scott.. Would you happen to have a photo the the top half of AD4 connector as I got the connector off the white mount, but since it is a bit tight, I am having a hard time trying to find the latch to unhook the two halfs?..
Thanks Scott! Quote:
Last edited by CB900F2; 03-18-2011 at 08:42 PM. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 07:50 AM |
Cruise Control | chessclubloser | DIY / Maintenance / Service | 11 | 03-27-2010 11:59 AM |
2007 Yaris Pricing Info ! | YarisBueller | New YARIS Purchase Forum | 104 | 06-24-2009 04:54 PM |
Using Cruise control | Driver | General Yaris / Vitz Discussion | 14 | 11-09-2006 10:12 PM |