center caps for 15" steelies? - Toyota Yaris Forums

Lewis · 07-22-2009, 08:06 AM

I want to get rid of the ugly plastic hubcaps and run the steel wheels bare- but I DO think it requires a center cap cover for the unsightly center hole. I saw these 2.25" center caps (the size of the center hole in the 15" steel wheels) that are used on the Corolla 15" wheels for sale on centercaps.net for $12.99 each. I ordered them yesterday and will see if they'll snap into the center hole on my Yaris' steelies. I'll let you know if this works out.

Lewis

p.s. Has anyone found caps that work? I'm not wild about the look of the NAPA ones shown on the site in a past posting.

thebarber · 07-22-2009, 08:21 AM

those won't work. theyre for aluminum rims.

IllusionX · 07-22-2009, 08:54 AM

you need one of those black center caps found on 98 Corolla VE's.

*kimona* · 07-22-2009, 09:01 AM

Lewis, I just don't see those working out for you. Let us know what you can make of them. IllusionX has a good suggestion for you.

IllusionX · 07-22-2009, 10:10 AM

the tercel ones are good.

Yaris Hilton · 07-22-2009, 10:15 AM

What's ugly is the unpainted, rusty, threaded end of the hub protruding in the center of the wheels. A bit of judiciously applied black Rustoleum could help a lot. I think the black steelies look as good as any of the black mags folks are putting on these days.

IllusionX · 07-22-2009, 10:21 AM

omg.. since when you guys call alloy rims "mags" ??!

Mead · 07-22-2009, 11:28 AM

You can always do this: spot the appropriate center caps in public, wait for the owner to return and offer cash

(probably cheaper than $12 each). You can also test fit on the spot. This should work with beaters, who's gonna care about missing caps when theres rust all over the fenders

Yaris Hilton · 07-22-2009, 05:14 PM

Since about 1965 for me.

I think it a bit strange to call wheels "rims."

coffiend · 07-23-2009, 12:44 AM

tercel caps on my wheels, in case you were curious what they'd look like on your car.

I found them at a salvage yard, got all 4 for 5 bucks, sprayed em black then clear coated them... they fit nice and snug

Lewis · 07-23-2009, 07:44 AM

Thanks so much Coffiend! Based on your advice I switched my order to what you're using! If anyone is interested in buying them I found them at centercaps.net - their catalog # 2672 (what I bought) for $19.99 each.

Also- # 1291 looks exactly like what Coffiend is using ($18.99).

My opinion- the center caps on the steel wheel looks WAY better than the hubcap- much more suitable on an economy car than an obviously fake alloy by way of a cheesy plastic cover. I do plan to paint the actual steel wheels silver (a DIY job) - like it was on the Tercel and Corolla so it looks more OEM (leaving the cap black) when I have the time BTW. When done I'll post a photo.

p.s.- I love this forum- so far thanks to the forum I discovered the rear anti-sway bar - which transformed the car's handling for the better and now these caps. The last thing I want to do to my car is a tach (my car has a manual and IMO manual cars should always be equipped with a tach)- but so far the OEM S model cluster swap solution (which is the only one that looks ok to me) is feeling too pricey from the dealer and practically impossible to find the correct one (i.e. with a tach, ABS and for a manual trans) on eBay.

Yaris Hilton · 07-23-2009, 03:17 PM

Oh yeah, that looks great!

coffiend · 07-24-2009, 02:13 AM

no problem Lewis, you're welcome.

Good luck with your wheel project, make sure to keep us updated on how it looks when you get done.

Lewis · 07-24-2009, 04:31 PM

will do

RedRide · 08-13-2009, 04:03 AM

I scored these 4, brand spanking new center caps on eBay.
Starting bid was $10.00 for all four. Absolutly no one else bid on them!

They were delived today as were my trim rings.
I installed them and they look great.

MUSKOKA800 · 08-13-2009, 09:03 AM

Quote:

Originally Posted by IllusionX

omg.. since when you guys call alloy rims "mags" ??!

Old school! (one room, old school)

the term has slipped from my lips occasionally too. Me being much more ancient than most here.

MUSKOKA800 · 08-13-2009, 09:08 AM

Quote:

Originally Posted by RedRide

I scored these 4, brand spanking new center caps on eBay.
Starting bid was $10.00 for all four. Absolutly no one else bid on them!

They were delived today as were my trim rings.
I installed them and they look great.

Hmmm, although not attractive IMO, those would less unsightly than nothing when running the winter boots on OEM steelies.

YAR1S · 08-13-2009, 10:28 AM

lollolol those trim rings are getting popular.

07-22-2009, 08:21 AM	#2
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	those won't work. theyre for aluminum rims. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
center caps for enkei rpf1s???	andruboz	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	6	06-05-2010 10:37 PM
Toyota center caps	regal	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	3	04-14-2009 12:43 PM
Some "insert explicit" jacked my center caps	Nexus1155	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	4	03-16-2009 10:24 PM
How to put center caps on wheels w/o breaking them?	TitaniumBarbell	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	10	02-09-2009 06:29 PM
painted center caps on steelies	kurokoma-kun	Photo-Video-Media Gallery	14	05-11-2007 09:55 AM

07-22-2009, 08:54 AM	#3
IllusionX It's the illusion you see View User's Garage Drives: 07 Yaris Sedan Aero Join Date: Oct 2006 Location: Brossard, QC Posts: 3,888	you need one of those black center caps found on 98 Corolla VE's.

07-22-2009, 09:01 AM	#4
kimona Super Moderator Drives: 2014 White VITZ Join Date: May 2007 Location: Huntington Bch, CA Posts: 4,938	Lewis, I just don't see those working out for you. Let us know what you can make of them. IllusionX has a good suggestion for you.

07-22-2009, 10:10 AM	#5
IllusionX It's the illusion you see View User's Garage Drives: 07 Yaris Sedan Aero Join Date: Oct 2006 Location: Brossard, QC Posts: 3,888	the tercel ones are good.

07-22-2009, 10:15 AM	#6
Yaris Hilton Half a Bubble Off Plumb Drives: 2009 Yaris Sedan Join Date: Mar 2009 Location: Bristol, Tennessee, USA Posts: 1,593	What's ugly is the unpainted, rusty, threaded end of the hub protruding in the center of the wheels. A bit of judiciously applied black Rustoleum could help a lot. I think the black steelies look as good as any of the black mags folks are putting on these days.

07-22-2009, 10:21 AM	#7
IllusionX It's the illusion you see View User's Garage Drives: 07 Yaris Sedan Aero Join Date: Oct 2006 Location: Brossard, QC Posts: 3,888	omg.. since when you guys call alloy rims "mags" ??!

07-22-2009, 11:28 AM	#8
Mead Drives: BSP Yaris LB 2007 Join Date: Apr 2007 Location: LBC Posts: 315	You can always do this: spot the appropriate center caps in public, wait for the owner to return and offer cash (probably cheaper than $12 each). You can also test fit on the spot. This should work with beaters, who's gonna care about missing caps when theres rust all over the fenders

07-22-2009, 05:14 PM	#9
Yaris Hilton Half a Bubble Off Plumb Drives: 2009 Yaris Sedan Join Date: Mar 2009 Location: Bristol, Tennessee, USA Posts: 1,593	Since about 1965 for me. I think it a bit strange to call wheels "rims."

07-23-2009, 12:44 AM	#10
coffiend View User's Garage Drives: 08 Black LB Join Date: Jun 2009 Location: Omaha, NE Posts: 448	tercel caps on my wheels, in case you were curious what they'd look like on your car. I found them at a salvage yard, got all 4 for 5 bucks, sprayed em black then clear coated them... they fit nice and snug

07-23-2009, 03:17 PM	#12
Yaris Hilton Half a Bubble Off Plumb Drives: 2009 Yaris Sedan Join Date: Mar 2009 Location: Bristol, Tennessee, USA Posts: 1,593	Oh yeah, that looks great!

07-24-2009, 02:13 AM	#13
coffiend View User's Garage Drives: 08 Black LB Join Date: Jun 2009 Location: Omaha, NE Posts: 448	no problem Lewis, you're welcome. Good luck with your wheel project, make sure to keep us updated on how it looks when you get done.

07-24-2009, 04:31 PM	#14
Lewis Our off road vehicle Drives: 2009 Yaris 3dr Join Date: Apr 2009 Location: NJ Posts: 198	will do