2015 Yaris Cruise Control - Toyota Yaris Forums

Horror_Hornet · 01-25-2023, 12:56 PM

Hello!

New forum user here, I've got a 2015 Yaris 1.5L Automatic 4-door Hatchback, 1NZ-FE Engine model, and I've been browsing the forums reading up on installing cruise control. It sounds like with an automatic it's a straightforward process as long as cruise control is already a part of the ECM, which is what I'm not sure about with my particular model. Is there an easy way for me to test whether I'm going to need an aftermarket kit or can just slot in an OEM stalk?

mitch9521 · 01-25-2023, 04:13 PM

As far as I know all 2012+ NCP131 Yaris' sold in North America are pre-wired for OEM cruise, all you need to do is get the stalk and little trim piece for your steering wheel that has the hole built in for the cruise stalk. Even your gauge cluster indicator lights will work.

ltwargssf · 01-28-2023, 12:18 PM

Yes its all prewired, very easy to install. Mine with the 5 speed manual just needed the extra clutch switch that you wont need.

Horror_Hornet · 01-28-2023, 05:26 PM

I just finished the install and test drive, that was so easy and works great now, I'm so mad I've spent six years with this car without cruise control!! It cost all of $15 for the stalk and an hour of time. A garage I talked to about it quoted me $750 for the install, what a scam of a price. This forum is fantastic!

hypersata · 05-20-2023, 09:46 AM

Hi All, I am new to the Forum.
I have been reading about how to install cruise control on Yaris 3rd gen- 1.3 L GCC Version with 2nz-FE Engine

the problem is that the gauge cluster does not have a cruise light built in it and even the Clock spiral in the steering was not with the cruise switch port.
so I have installed the new clock spiral which supports steering controls and cruise as well, but now I am wondering what else to do to make the cruise work.

I have installed the cruise switch and plugged in the spiral, the spiral had some additional pins as supplied, and all fo them connected as well.

any help on the same model ??
would be much appreciated.

mitch9521 · 05-20-2023, 04:31 PM

Quote:

Originally Posted by hypersata

Hi All, I am new to the Forum.
I have been reading about how to install cruise control on Yaris 3rd gen- 1.3 L GCC Version with 2nz-FE Engine

the problem is that the gauge cluster does not have a cruise light built in it and even the Clock spiral in the steering was not with the cruise switch port.
so I have installed the new clock spiral which supports steering controls and cruise as well, but now I am wondering what else to do to make the cruise work.

I have installed the cruise switch and plugged in the spiral, the spiral had some additional pins as supplied, and all fo them connected as well.

any help on the same model ??
would be much appreciated.

As far as I know from experimenting, if you do not have the cruise lights in your instrument cluster, cruise will not work. I found this out by trying out a Japan market cluster in my USDM car and the cruise wouldn't work. Maybe try swapping in a cluster with the cruise lights?

Seems like if no cruise lights, circuit is broken/incomplete and will not work. Very strange.

01-25-2023, 12:56 PM	#1
Horror_Hornet Drives: 2015 Yaris Hatchback Join Date: Jan 2023 Location: WA Posts: 2	2015 Yaris Cruise Control Hello! New forum user here, I've got a 2015 Yaris 1.5L Automatic 4-door Hatchback, 1NZ-FE Engine model, and I've been browsing the forums reading up on installing cruise control. It sounds like with an automatic it's a straightforward process as long as cruise control is already a part of the ECM, which is what I'm not sure about with my particular model. Is there an easy way for me to test whether I'm going to need an aftermarket kit or can just slot in an OEM stalk?

01-25-2023, 04:13 PM	#2
mitch9521 Gen 3 > Gen 2 Drives: NCP131, F-150 Join Date: Jul 2019 Location: Brantford, Ontario Posts: 448	As far as I know all 2012+ NCP131 Yaris' sold in North America are pre-wired for OEM cruise, all you need to do is get the stalk and little trim piece for your steering wheel that has the hole built in for the cruise stalk. Even your gauge cluster indicator lights will work. __________________ 2014 NCP131 5 Speed 2007 F150 4.2L 5 Speed 2013 Rav4 LE AWD Autotragic - Wife's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2010 Toyota Yaris Cruise Control	vaironl	DIY / Maintenance / Service	11	03-15-2020 09:33 AM
2017 Yaris L Cruise control	Spidious	Third Gen Yaris General Discussion	6	07-17-2019 05:38 PM
Yaris Cruise Control NEW unused - $65 shipped	NW Yaris	Items for Sale by private party	3	04-24-2017 11:23 AM
Cruise control, yaris 2015, 5 speed	Eduardo_mty	DIY / Maintenance / Service	17	10-12-2014 09:58 PM
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	5	09-05-2010 08:53 PM

01-28-2023, 12:18 PM	#3
ltwargssf Drives: yaris Join Date: Nov 2018 Location: canada Posts: 38	Yes its all prewired, very easy to install. Mine with the 5 speed manual just needed the extra clutch switch that you wont need.

01-28-2023, 05:26 PM	#4
Horror_Hornet Drives: 2015 Yaris Hatchback Join Date: Jan 2023 Location: WA Posts: 2	I just finished the install and test drive, that was so easy and works great now, I'm so mad I've spent six years with this car without cruise control!! It cost all of $15 for the stalk and an hour of time. A garage I talked to about it quoted me $750 for the install, what a scam of a price. This forum is fantastic!

05-20-2023, 09:46 AM	#5
hypersata Drives: Yaris 2014 GCC LHD 4AT Join Date: May 2023 Location: GCC Posts: 2	Hi All, I am new to the Forum. I have been reading about how to install cruise control on Yaris 3rd gen- 1.3 L GCC Version with 2nz-FE Engine the problem is that the gauge cluster does not have a cruise light built in it and even the Clock spiral in the steering was not with the cruise switch port. so I have installed the new clock spiral which supports steering controls and cruise as well, but now I am wondering what else to do to make the cruise work. I have installed the cruise switch and plugged in the spiral, the spiral had some additional pins as supplied, and all fo them connected as well. any help on the same model ?? would be much appreciated.