15x8 end all questions - Page 6 - Toyota Yaris Forums

1.5 · 08-07-2012, 11:18 AM

wow authentic rays? how much?

I almost picked up a set of the konig flatout in white.

Kaotic Lazagna · 08-08-2012, 07:55 PM

Those are not real Rays. Look closer, they say "RAVS"

Kaotic Lazagna · 08-08-2012, 07:56 PM

Oddly enough, they're the rims that you almost picked up. lol

imola_s4 · 08-09-2012, 11:52 PM

^^^ yes they are "RAVS" but for the non ballers who just cruise and want to look good they work just fine... lol

Kaotic Lazagna · 08-10-2012, 12:16 AM

Nothing wrong with knock offs, I had a set of Rota Grids before ;)

I just hate it when people purposely try to pass off knock off for the real deal by putting on "legit" stickers on the rims. lol

imola_s4 · 08-10-2012, 11:13 AM

^^^ ya I don't like people putting real stickers on replica rims.. That's why I liked these cuz they're on there from the get go no stickers needed.. Lol

DeathBeard · 10-18-2012, 06:20 PM

I ran 16x9 0 offset wheels on 2000 prelude, the car drove like total crap, I spent a crap load of money on tires and fender work..Also the car became 10000x more difficult to sell since the fenders were rolled/pulled (professionally I would like to add)..Stock fender cars will not only sell sooner but you will get more money for it, I have learned this the hard way on nearly all the vehicles I have sold..So far this yaris is the second car that I have left the fenders stock and actually got proper fitting wheels/ tires (feels good) If you want to go crazy on fitment I suggest selling the yaris and getting something with camber plates, or wishbones with negative A arms I.e- crx,delsol, 350z etc.. the yaris imo is a waste of time chasis to mod. It's good for getting from point A to B as cheaply, reliably and comfortably as possible. Just my 0.02

403RS · 10-26-2012, 02:16 AM

Enough about 15x8... what about 17x8 (+30)?

These are for sale locally, and I've been having wet dreams about them ever since.

Kaotic Lazagna · 10-26-2012, 02:27 AM

In the rear, that's going to be flush, with about 2-4mm of poke beyond the fender. The front will poke more.

Kaotic Lazagna · 10-26-2012, 02:30 AM

My rears are 17x8, with an effective offset of +32. The fronts are an embarrassing 17x7, ET42 ='(

1.5 · 11-05-2013, 07:17 AM

I know this is a year long bump but its so funny to read some of my posts and to see how far ive come. I wanted to run 15x8 +0 xxr's with s tech springs lol. Going for that Mexi poke look.

Now to coilovers maxed out and authentic rebuilt BBS running massive stretch and camber. How ive matured lol

b20vteg · 12-09-2013, 04:59 AM

i like to reread this thread when i'm bored. like tonight...

d3310n · 12-11-2013, 11:51 PM

doing 15x7 with 185/55r15 +20 offset. im on micro image springs, will the wheel gap be any bigger than coffiends running stechs? how about rubbing

1.5 · 12-13-2013, 07:14 AM

Idk what his specs are but that will give your a wider stance being 7" and +20. The 185/55 will give you more wheel gap than stock since stock is most likely 185/60.

You are probably going to experience some rubbing with that setup but nothing a quick fender pull wont solve. Our plastic fenders are cake to pull by hand

cali yaris · 12-13-2013, 06:53 PM

I have a bunch of new 15x8 wheels to offer you guys. Local company we met at SEMA, very nice quality and GREAT pricing.
Starting here (more to be added over the weekend):

http://shop.microimageonline.com/ESM...el-ESM-001.htm

1.5 · 12-16-2013, 09:42 AM

ESM! I love their wheels. Probably the closest thing to legit Borbets and legit BBSRS without being 100%! Glad to see MI offering another great product

cali yaris · 12-16-2013, 01:28 PM

http://shop.microimageonline.com/ESM...el-ESM-006.htm

cali yaris · 12-16-2013, 01:28 PM

http://shop.microimageonline.com/ESM...-2-ESM-007.htm

08-07-2012, 11:18 AM	#91
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	wow authentic rays? how much? I almost picked up a set of the konig flatout in white. __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

10-18-2012, 06:20 PM	#97
DeathBeard Drives: 2010 Yaris S Join Date: Apr 2010 Location: Los Angeles, CA Posts: 574	I ran 16x9 0 offset wheels on 2000 prelude, the car drove like total crap, I spent a crap load of money on tires and fender work..Also the car became 10000x more difficult to sell since the fenders were rolled/pulled (professionally I would like to add)..Stock fender cars will not only sell sooner but you will get more money for it, I have learned this the hard way on nearly all the vehicles I have sold..So far this yaris is the second car that I have left the fenders stock and actually got proper fitting wheels/ tires (feels good) If you want to go crazy on fitment I suggest selling the yaris and getting something with camber plates, or wishbones with negative A arms I.e- crx,delsol, 350z etc.. the yaris imo is a waste of time chasis to mod. It's good for getting from point A to B as cheaply, reliably and comfortably as possible. Just my 0.02 __________________ "In his heart a man plans his course, but the Lord determines his steps." Proverbs 16:9 Last edited by DeathBeard; 10-18-2012 at 06:35 PM.

11-05-2013, 07:17 AM	#101
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	I know this is a year long bump but its so funny to read some of my posts and to see how far ive come. I wanted to run 15x8 +0 xxr's with s tech springs lol. Going for that Mexi poke look. Now to coilovers maxed out and authentic rebuilt BBS running massive stretch and camber. How ive matured lol __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

12-09-2013, 04:59 AM	#102
b20vteg no show, no go :( Drives: 2012 yaris 3dr hb Join Date: Aug 2012 Location: maricopa, az Posts: 369	i like to reread this thread when i'm bored. like tonight... __________________

12-13-2013, 07:14 AM	#104
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	Idk what his specs are but that will give your a wider stance being 7" and +20. The 185/55 will give you more wheel gap than stock since stock is most likely 185/60. You are probably going to experience some rubbing with that setup but nothing a quick fender pull wont solve. Our plastic fenders are cake to pull by hand __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

08-08-2012, 07:55 PM	#92
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	Those are not real Rays. Look closer, they say "RAVS"

08-08-2012, 07:56 PM	#93
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	Oddly enough, they're the rims that you almost picked up. lol

08-09-2012, 11:52 PM	#94
imola_s4 Drives: stock Join Date: Jul 2012 Location: el cajon Posts: 24	^^^ yes they are "RAVS" but for the non ballers who just cruise and want to look good they work just fine... lol

08-10-2012, 12:16 AM	#95
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	Nothing wrong with knock offs, I had a set of Rota Grids before ;) I just hate it when people purposely try to pass off knock off for the real deal by putting on "legit" stickers on the rims. lol

08-10-2012, 11:13 AM	#96
imola_s4 Drives: stock Join Date: Jul 2012 Location: el cajon Posts: 24	^^^ ya I don't like people putting real stickers on replica rims.. That's why I liked these cuz they're on there from the get go no stickers needed.. Lol

10-26-2012, 02:16 AM	#98
403RS #yyc View User's Garage Drives: BSP '07 RS 5dr LB Join Date: Aug 2011 Location: Calgary, Canada Posts: 238	Enough about 15x8... what about 17x8 (+30)? These are for sale locally, and I've been having wet dreams about them ever since.

10-26-2012, 02:27 AM	#99
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	In the rear, that's going to be flush, with about 2-4mm of poke beyond the fender. The front will poke more.

10-26-2012, 02:30 AM	#100
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	My rears are 17x8, with an effective offset of +32. The fronts are an embarrassing 17x7, ET42 ='(

12-11-2013, 11:51 PM	#103
d3310n Drives: black titty Join Date: Jun 2013 Location: florida Posts: 89	doing 15x7 with 185/55r15 +20 offset. im on micro image springs, will the wheel gap be any bigger than coffiends running stechs? how about rubbing

12-13-2013, 06:53 PM	#105
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	I have a bunch of new 15x8 wheels to offer you guys. Local company we met at SEMA, very nice quality and GREAT pricing. Starting here (more to be added over the weekend): http://shop.microimageonline.com/ESM...el-ESM-001.htm __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

12-16-2013, 09:42 AM	#106
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	ESM! I love their wheels. Probably the closest thing to legit Borbets and legit BBSRS without being 100%! Glad to see MI offering another great product __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

12-16-2013, 01:28 PM	#107
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	http://shop.microimageonline.com/ESM...el-ESM-006.htm __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

12-16-2013, 01:28 PM	#108
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	http://shop.microimageonline.com/ESM...-2-ESM-007.htm __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Word Association	Black Yaris	Off-topic / Other Cars / Everything else Discussions	7373	10-04-2011 10:43 PM
End of a decade?	yaris-me	Off-topic / Other Cars / Everything else Discussions	4	12-31-2009 12:12 PM
aftermarket front sway bar end links?	jookybanana	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	3	08-08-2009 11:26 PM
Review: Adjustable Sway Bar End Links	m911gt	Performance Modifications	9	04-29-2009 09:25 AM
Questions, questions...	littlecarlove	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	3	10-21-2006 01:42 PM