|
10-15-2009, 02:11 AM | #1 |
Drives: Decepticon - Ravage Join Date: Nov 2008
Location: San Francisco
Posts: 1,462
|
offset for 7in on nf210s
Iv been doing some searches for Team Dynamics 15x7s, i dont know what offset i should go with. I have a 12mm spacer right now on my steelies, so i was thinking of combinations like 40mm and 12mm spacer, etc. Iv used http://www.1010tires.com/WheelOffsetCalculator.asp to help me decide. I do sometimes have about 300lbs in the back seat, and 250lb in front (me included), and if i do need to have more weight in the back, i could always swap to stock springs, shouldnt be too hard.
*whats the ratio when it comes to the stock height weight load and lowered car?
__________________
Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274 |
10-15-2009, 09:16 AM | #2 |
Reluctantly Crouched...
Drives: 2008 Yaris HB M/T Join Date: Oct 2008
Location: DFW, TX
Posts: 867
|
40mm should work with that spacer. With 15x7 wheels, you should have room to work with. I run 15x7 +35mm racing wheels with 205-50-15 Kumho XS's and NF210's, and I have room to spare all the way around. Even if I had a rear spacer, it would be fine.
|
10-15-2009, 09:18 AM | #3 | |
Start another Oil Thread!
|
if you go with +35 you'll probably rub a bit in the rear when carrying a lot of weight/passengers.
penguin garage rear camber shims would solve that.
__________________
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Offset and lowering on 205/45/16s | driver centric | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 22 | 08-13-2016 10:09 AM |
hard to find anything that's NOT 38 or 40 offset... will these fit without rubbing? | tonyg | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 10 | 03-19-2009 08:53 PM |
Proper offset? | FA7 | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 18 | 02-01-2009 08:37 PM |
need 17inch rim guidence | chino_potato | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 46 | 04-09-2007 12:09 PM |
max width and offset? | Fat Felixxx | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 2 | 06-08-2006 03:43 PM |