|
03-18-2009, 02:53 PM | #1 |
Drives: 08 sedan at Join Date: Dec 2008
Location: long island
Posts: 313
|
Problem with GTspec strut bar installation
i can't seem to get the second hole in......do i have to 'bend' force it in?
danks |
03-18-2009, 03:50 PM | #2 |
sorry but i opted to not take their front strut bar. maybe TREYZ will know?
__________________
EVERYBODY EVENTUALLY COMES BACK TO YARISWORLD...... |
|
03-18-2009, 04:33 PM | #3 |
Drives: 08 sedan at Join Date: Dec 2008
Location: long island
Posts: 313
|
|
03-18-2009, 05:15 PM | #4 |
Drives: '08 Yaris Sedan, Aero Package Join Date: Oct 2008
Location: Burlington, Ontario, Canada
Posts: 1,720
|
Just thinking out loud here. Food for Thought.
1) Have you tried dis-assembling the unit, mounting the strut-tower (blue) pieces loosely, re-installing the cross member (silver bar) and then torquing all to spec. ? 2) have you jacked up the car so no wgt. is on the front suspension, thus relaxing the uni-body during installation. I've heard some strut bar manufacturers suggest this technique so it's bolted up with the car un-stressed by it's own weight. Good Luck!
__________________
TRD Upgrades: 18" Wheels wrapped in 215/35/18 PZero's, Sportivo Shocks/Struts, Lowering Springs, Swaybar, Axle-Back Exhaust, Oil Cap, Rad Cap, Signage. Aftermarket Goodies: Piggies SS, K&N Drop-In, Blitz S/C, DC Header, NST Pulley) Toyota Options/Accessories: Sport Pedal Covers, Sport Shift Knob, Ipod Interface, Summer Mats, Winter Mats, Cruise Control, Auto-Dim Mirror, Echo steelies with winter boots. |
03-20-2009, 03:55 AM | #5 |
Drives: 08 sedan at Join Date: Dec 2008
Location: long island
Posts: 313
|
thanks guys i'll try doing that
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tanabe Front Strut Bar | Benggolf2 | Performance Modifications | 57 | 08-15-2014 02:41 AM |
DIY: Strut Tower Brace Bar | redyaris | DIY / Maintenance / Service | 18 | 03-16-2014 06:52 PM |
Do you HAVE to remove the wheels to install strut bar? | Yawesh | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 9 | 02-10-2009 02:35 PM |
Installed the Tanabe Strut bar but had to remove my ground wire kit.. | vacantj | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 6 | 10-01-2007 01:56 PM |
C-ONE Front Strut Tower Bar - Installed & Impressions (Pics to Come) | bigsky2 | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 20 | 01-10-2007 06:53 PM |