No RPM signal? Any ideas? - Toyota Yaris Forums

XYaris · 06-28-2009, 09:03 AM

I installed a tach a few months ago with the provided wire clips. When I lost the rpm signal I figured it was because of a bad connection. However now I've made a new connection and the tach is not reading any rpm. All fuses are good and the tach is powering on. Is it possible or likely that it's a connection inside the guage itself? It's one of those 30 dollar sunpro things after all. Anyone in the NYC area have a scangauge?

If this damn car came with a tachometer in the first place, all this hassle could be avoided.

I appreciate any thoughts...

Tamago · 06-28-2009, 09:24 AM

sounds like a bad tach.

schleppy · 06-28-2009, 09:31 AM

I'd agree with Tamago, I think the tach may have crapped out. I have the same tach and it's already starting to deteriorate (moisture is creeping in behind the face).

Make sure to check your power/ground connection too.

cali yaris · 06-28-2009, 02:55 PM

Quote:

It's one of those 30 dollar sunpro things after all.

+1

XYaris · 06-28-2009, 03:14 PM

Problem solved...for now. I walked around the corner and bought another tach. Same brand different size. In six months when this breaks I will buy something decent. I just HAVE to have a tach. On this car with such a silent stock engine and exhaust its so hard to tell what the engine is doing without some visual indication. Did I mention I think it's lame that toyota didn't spec one?

Thanks a lot guys.

RedRide · 06-28-2009, 03:47 PM

Quote:

Originally Posted by XYaris

Problem solved...for now. I walked around the corner and bought another tach. Same brand different size. In six months when this breaks I will buy something decent. I just HAVE to have a tach. On this car with such a silent stock engine and exhaust its so hard to tell what the engine is doing without some visual indication. Did I mention I think it's lame that toyota didn't spec one?

Thanks a lot guys.

I agree. I can't live without a tach either and the quiet enging and exhaust just add to the problem as you said.

Anyway, this is why I recently ordered a SpeedHut "revolution" tach for my new (manual tranny) Yaris.

06-28-2009, 09:03 AM	#1
XYaris Drives: '09 Yaris LB Join Date: Dec 2008 Location: NYC Posts: 152	No RPM signal? Any ideas? I installed a tach a few months ago with the provided wire clips. When I lost the rpm signal I figured it was because of a bad connection. However now I've made a new connection and the tach is not reading any rpm. All fuses are good and the tach is powering on. Is it possible or likely that it's a connection inside the guage itself? It's one of those 30 dollar sunpro things after all. Anyone in the NYC area have a scangauge? If this damn car came with a tachometer in the first place, all this hassle could be avoided. I appreciate any thoughts...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NAV SYSTEM ANTENA SIGNAL BLOCKED BY TINT ON WINDSHIELD	Giobatera	In Car Entertainment + Electronics (audio / video / alarm)	15	07-08-2009 10:55 AM
Source code for Yaris Tachometer	metalshark	DIY / Maintenance / Service	27	04-06-2009 12:41 AM
Optimal RPM for shifting Gears ?	JapRulezz	Performance Modifications	8	03-07-2009 04:16 AM
RPM Gauge Install	rwseattle	DIY / Maintenance / Service	1	04-15-2007 12:23 PM
Turn signal audible alert	paultyler_82	Performance Modifications	7	10-01-2006 10:21 AM

06-28-2009, 09:31 AM	#3
schleppy I love momentum. View User's Garage Drives: 2009 Yaris LB, Red Join Date: Feb 2009 Location: Boston, MA Posts: 587	I'd agree with Tamago, I think the tach may have crapped out. I have the same tach and it's already starting to deteriorate (moisture is creeping in behind the face). Make sure to check your power/ground connection too.

06-28-2009, 03:14 PM	#5
XYaris Drives: '09 Yaris LB Join Date: Dec 2008 Location: NYC Posts: 152	Problem solved...for now. I walked around the corner and bought another tach. Same brand different size. In six months when this breaks I will buy something decent. I just HAVE to have a tach. On this car with such a silent stock engine and exhaust its so hard to tell what the engine is doing without some visual indication. Did I mention I think it's lame that toyota didn't spec one? Thanks a lot guys.