Crank no start 01 Yaris Ts

[Cognac]

Hi all, been a while but hoping someone can help me dive into this issue.

Couple years back had a minor incident with a crash barrier that mangled my hood and radiator support. Chassis is fine and found replacements for the rest. While I had the space in the engine room I swapped the engine (1nz-fe) as mine was using buckets of oil.

After swapping engines gave the replacement a small service with oil, filter and plugs but engine ran very rough. Misfiring on cil 1. Switched coils from previous good running engine but problem remained.

Have a bluetooth obd scanner but didn’t get any codes or useful information so tried my luck with a vci plug. Never got it to work, but now some weird issues remain.(yes, lesson learned on copies)

- The cluster no longer displays the mileage unless the vci plug is in place
- Engine cranks fine but wont run at all anymore…
- After cranking the needles start dancing, only stopping after removing key
- key “on” position doesn’t show cel

So with the vci plug in place all looks fine, starts still but wont fire anyway.

Things I’ve tried:
- spray some brakecleaner to see if it runs, no luck
- checked all fuses, efi, am2, etc all good
- Have another Yaris, same year, engine etc and switched over ecu, key and cluster and was running fine so those components are good, thankfully ecu not fried

I’d say maybe I fried the obd port or something, but how does one check that? Cant seem to find wiring or pinout info for this ecu (Fujitsu 89661-52230 mt)