DIY: 2006-2011 Yaris OEM Cruise Control Complete Installation - Page 6 - Toyota Yaris Forums

Hanu91 · 04-21-2016, 03:29 PM

Hello!
I have manual yaris 2013 with 1.4 diesel engine. What parts do I need for the cruise to get it work?
Thanks

CTScott · 04-21-2016, 08:38 PM

Quote:

Originally Posted by Hanu91

Hello!
I have manual yaris 2013 with 1.4 diesel engine. What parts do I need for the cruise to get it work?
Thanks

For the diesel, your only option is an aftermarket complete system.

ScarabEpic22 · 05-25-2016, 08:42 PM

Lots of good info here, thanks for having it as a resource CTScott! I've learned a lot reading through the threads about adding OEM cruise.

I'd like to purchase a wiring kit and indicator from you for my 07 LB AT, tried sending you a PM but looks like there's a minimum post requirement. Sent you a PM, if duplicate then I apologize in advance.

CTScott · 05-25-2016, 09:12 PM

Quote:

Originally Posted by ScarabEpic22

Lots of good info here, thanks for having it as a resource CTScott! I've learned a lot reading through the threads about adding OEM cruise.

I'd like to purchase a wiring kit and indicator from you for my 07 LB AT, tried sending you a PM but looks like there's a minimum post requirement. Sent you a PM, if duplicate then I apologize in advance.

Go it and replied.

Mikeyh · 05-30-2016, 04:44 PM

Scott,

Thanks for the cruise control kit for my 2014 Yaris L. Just as you said, it was easy to install, really plug and play. Took about 20 mins. and the wiring you included for stalk and horn wire made connections simple.

If I can do it anyone can!

Anita (Mikey's wifey)

signatureseries · 06-09-2016, 05:20 PM

I am looking for a Cruise Control Kit 08 for a Liftback (3door) Manual. I am open to either style (stock or switch). I am new to the forum so i don't believe it will let me send a PM. Do you have anything available?

Quote:

Originally Posted by CTScott

Go it and replied.

Quote:

Originally Posted by CTScott

The 34 page PDF file below is a complete DIY for installing OEM Cruise Control on a 2006 to 2011 Yaris.

This will only work for US/Canda/Puerto Rico Yaris, as Yaris from all other areas lack the built-in ECM programming for Cruise Control. Vehicles from other areas must use an aftermarket cruise control system.

Any procedure that requires 34 pages of documentation may seem intimidating, but this installation is really not difficult. I tried to add as much detail as possible to clarify the parts where people who have installed cruise control have had questions.

This guide is broken up in to seven sections encompassing the following:

Section 1: OEM Cruise Control Stalk Installation.
Section 2: Steering Column Connector D3 Pin Installation
Section 3: ECM Connector A21 Pin Installation
Section 4: Connecting the ECM Pin to the Steering Column Pin Through the Firewall
Section 5: Cruise Control Clutch Switch Installation
Section 6: Optional Cruise Control Indicator Module Installation
Section 7: Verifying Operation

http://tinyurl.com/CruiseDIY

maral01 · 06-17-2016, 01:59 PM

Hi, new here and just wanted to say thank you to CTScott for this awesome DIY! Installed it in my 09 liftback within an hour and it is working flawlessly. Pulled the parts from a 08 Yaris at the junk yard and, believe it or not, it had that same DIY done to it by the previous owner! Not bad at all, especially since it only cost me 6$!

jra · 06-22-2016, 03:10 PM

Would a 2015 five door L automatic U.S. Yaris only need the stalk and wiring to plug in to clock spring and horn? If so do you have parts for this?

kevinj93 · 06-22-2016, 04:22 PM

The Series 3 cruise control installaion is very easy. See http://www.yarisworld.com/forums/showthread.php?t=37205 for details.

Sudspt · 06-22-2016, 08:41 PM

I have a question about my Yaris. I bought it in Las Vegas and I want to make sure that the ECU will tolerate the cruise control. It's a 2007 model. It says that it was manufactured in Japan, but it's a Toyota and that's where they're all manufactured, right? Just want to clarify that this method will work before I start rounding up the parts.

CTScott · 06-22-2016, 08:42 PM

Quote:

Originally Posted by Sudspt

I have a question about my Yaris. I bought it in Las Vegas and I want to make sure that the ECU will tolerate the cruise control. It's a 2007 model. It says that it was manufactured in Japan, but it's a Toyota and that's where they're all manufactured, right? Just want to clarify that this method will work before I start rounding up the parts.

Yes - For your car, as with all American market Yaris, cruise control will work.

Sudspt · 06-23-2016, 02:14 AM

Thanks! I will follow your pdf instructions and let you know how it goes! Appreciate it!

jra · 07-01-2016, 09:08 PM

Quote:

Originally Posted by jra

Would a 2015 five door L automatic U.S. Yaris only need the stalk and wiring to plug in to clock spring and horn? If so do you have parts for this?

Scott
Thanks for the parts you sent, took about 15 min. to install, works like it was factory installed.

Tomsyaris · 07-24-2016, 08:09 PM

Hi Scott I Sent a pm . Thanks

David C · 07-25-2016, 08:07 PM

Hi Scott, if I was to use a switch and LED to do a basic setup, could you pinpoint the essential wires ? Would a lighted 4 way switch work as a CC stalk and on/off indicator or do the CC indicator module would still be needed to act as a smart relay ? I have a '07 3dr LB, Canada. PM me the details if possible.

Thanks

bassmannate · 07-28-2016, 10:40 PM

Just used your guide to install a stalk and wiring. Worked great! The only thing I ran into was that I read the part about the indicator as "Yes: You'll need the indicator kit" or "No: You won't need the indicator kit" so I was a little disappointed when no light came on in the cluster but so happy to have cruise control on this car! Might have to get the indicator kit sometime just to have it in there.

bassmannate · 08-05-2016, 05:39 PM

Well, we're on our first road trip with the cruise control and it hasn't been completely smooth. The on/off button doesn't seem to work reliably the first time after starting the car. After you get it to come on the first time, it works great.

Is this just a problem with the switch/stalk i got? Is the control just a resistor ladder and could i just install a momentary switch with a resistor across the leads?

Sent from my LG-H811 using Tapatalk

CTScott · 08-05-2016, 11:34 PM

Quote:

Originally Posted by bassmannate

Well, we're on our first road trip with the cruise control and it hasn't been completely smooth. The on/off button doesn't seem to work reliably the first time after starting the car. After you get it to come on the first time, it works great.

Is this just a problem with the switch/stalk i got? Is the control just a resistor ladder and could i just install a momentary switch with a resistor across the leads?

Sent from my LG-H811 using Tapatalk

Where did you get the stalk?

05-25-2016, 08:42 PM	#93
ScarabEpic22 Drives: 07 Toyota Yaris Base Join Date: Jan 2016 Location: Seattle, WA Posts: 2	Lots of good info here, thanks for having it as a resource CTScott! I've learned a lot reading through the threads about adding OEM cruise. I'd like to purchase a wiring kit and indicator from you for my 07 LB AT, tried sending you a PM but looks like there's a minimum post requirement. Sent you a PM, if duplicate then I apologize in advance. __________________ ~Erik~ Last edited by ScarabEpic22; 05-25-2016 at 08:59 PM.

05-30-2016, 04:44 PM	#95
Mikeyh I've made a post! Drives: Yaris 2014 Join Date: May 2016 Location: Sacramento Posts: 1	Cruise Control Installed! Scott, Thanks for the cruise control kit for my 2014 Yaris L. Just as you said, it was easy to install, really plug and play. Took about 20 mins. and the wiring you included for stalk and horn wire made connections simple. If I can do it anyone can! Anita (Mikey's wifey)

06-22-2016, 04:22 PM	#99
kevinj93 Drives: 2013 NCP130 Join Date: Nov 2015 Location: Sydney, Australia Posts: 383	The Series 3 cruise control installaion is very easy. See http://www.yarisworld.com/forums/showthread.php?t=37205 for details. __________________ Running on standard AU 14" steel wheels (14x5 rims, 175/70R14 tyres). Added reversing camera and touch screen radio, cruise control, 16" rear wiper blade, tow bar and dash cam.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
Cruise Control Available for 06/07 Yaris	TOYOTaejien	General Yaris / Vitz Discussion	8	08-27-2010 01:58 PM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 12:59 PM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 05:54 PM

04-21-2016, 03:29 PM	#91
Hanu91 I've made a post! Drives: yaris 2013 Join Date: Apr 2016 Location: Finland Posts: 1	Hello! I have manual yaris 2013 with 1.4 diesel engine. What parts do I need for the cruise to get it work? Thanks

06-17-2016, 01:59 PM	#97
maral01 Drives: 2007 Yaris Sedan Join Date: Mar 2009 Location: Quebec, Canada Posts: 2	Hi, new here and just wanted to say thank you to CTScott for this awesome DIY! Installed it in my 09 liftback within an hour and it is working flawlessly. Pulled the parts from a 08 Yaris at the junk yard and, believe it or not, it had that same DIY done to it by the previous owner! Not bad at all, especially since it only cost me 6$!

06-22-2016, 03:10 PM	#98
jra Drives: 2015 yaris L Join Date: Jun 2016 Location: Indiana Posts: 77	Would a 2015 five door L automatic U.S. Yaris only need the stalk and wiring to plug in to clock spring and horn? If so do you have parts for this?

06-22-2016, 08:41 PM	#100
Sudspt Drives: Yaris Join Date: Jun 2016 Location: Las Vegas Posts: 2	I have a question about my Yaris. I bought it in Las Vegas and I want to make sure that the ECU will tolerate the cruise control. It's a 2007 model. It says that it was manufactured in Japan, but it's a Toyota and that's where they're all manufactured, right? Just want to clarify that this method will work before I start rounding up the parts.

06-23-2016, 02:14 AM	#102
Sudspt Drives: Yaris Join Date: Jun 2016 Location: Las Vegas Posts: 2	Thanks! I will follow your pdf instructions and let you know how it goes! Appreciate it!

07-24-2016, 08:09 PM	#104
Tomsyaris I've made a post! Drives: 2010 yaris sedan Join Date: Jul 2016 Location: Ontario Posts: 1	Hi Scott I Sent a pm . Thanks

07-25-2016, 08:07 PM	#105
David C Drives: White '07 3dr LB Join Date: Jun 2016 Location: Montreal Posts: 480	Hi Scott, if I was to use a switch and LED to do a basic setup, could you pinpoint the essential wires ? Would a lighted 4 way switch work as a CC stalk and on/off indicator or do the CC indicator module would still be needed to act as a smart relay ? I have a '07 3dr LB, Canada. PM me the details if possible. Thanks

07-28-2016, 10:40 PM	#106
bassmannate Drives: 2008 Toyota Yaris Join Date: Jul 2016 Location: Crystal Lake, il Posts: 24	Just used your guide to install a stalk and wiring. Worked great! The only thing I ran into was that I read the part about the indicator as "Yes: You'll need the indicator kit" or "No: You won't need the indicator kit" so I was a little disappointed when no light came on in the cluster but so happy to have cruise control on this car! Might have to get the indicator kit sometime just to have it in there.

08-05-2016, 05:39 PM	#107
bassmannate Drives: 2008 Toyota Yaris Join Date: Jul 2016 Location: Crystal Lake, il Posts: 24	Well, we're on our first road trip with the cruise control and it hasn't been completely smooth. The on/off button doesn't seem to work reliably the first time after starting the car. After you get it to come on the first time, it works great. Is this just a problem with the switch/stalk i got? Is the control just a resistor ladder and could i just install a momentary switch with a resistor across the leads? Sent from my LG-H811 using Tapatalk