|
|
02-24-2020, 08:56 AM | #1 |
Drives: 2009 Yaris LE 5 dr Join Date: Feb 2009
Location: Kenora. Ontario, Canada
Posts: 45
|
that is correct... the sub frame doesn't need to come out..
I needed to removed the drivers side inner tie rod and boot and then wiggle the rack out the passenger side.. it takes a bit of twist and turn and about 5 minutes but out she came... on reinstall it goes in the same way... the inner tie rod is installed after the rack is back on.. |
08-23-2020, 05:54 PM | #2 |
Drives: 2010 yaris 3 door hatch Join Date: Jun 2013
Location: Sheboygan Falls, Wi.
Posts: 509
|
I was checking the LCA bolts on a new to me 09, I got the bolts out ok, not to rusty but rusty dust fell out. The metal sleeve of the bushing seemed way over sized for the bolt. Anyone remember this being the case?
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cruise control install 2009 Yaris 3 door | PeteZNY | DIY / Maintenance / Service | 125 | 03-31-2024 09:22 AM |
DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag | CTScott | DIY / Maintenance / Service | 307 | 04-04-2023 03:43 AM |
DIY Cruise Control FAQ (2006-2010 Yaris) | CTScott | DIY / Maintenance / Service | 467 | 10-18-2022 10:20 AM |
Cruise Control - Again! | CB900F2 | DIY / Maintenance / Service | 47 | 06-17-2010 06:29 PM |
Cruise control vs MPG | YarisOwnersDad | Fuel Economy Forum | 15 | 05-29-2009 03:55 PM |