Parking Light Flash Output vs Hazard Light Output - Toyota Yaris Forums

sex · 11-03-2009, 12:44 PM

I'm installing the Viper 3002 Model alarm on my '09 Yaris.

I want the hazard light to flash when the alarm is armed/disarmed instead of the parking lights. I plan to connect the 10 A parking light flash output (H1/11 WHITE) to the Hazard Warning Signal Switch wire (17[4S] BLACK) instead of to the parking lights.

In some alarm the parking light is still on for 30 seconds after the initial flash when disarmed. I don't want to be driving around with my hazard lights on. Does know if the Viper alarm only flashes when armed/disarmed? Or if the light is on for 30 seconds after the flash?

Thanks for any input!

ezhacker1 · 11-03-2009, 03:04 PM

if i remember correctly, the hazard light switch, has 3 wires on it, dont remember color besides an obvious ground, probably white/red/black. I was lazy and went to tap into the hazards from there, one of the lines blew a fuse, then went to another and oddly enough it flashes my parkling lights...dont know why. 1 thing to note is i have 2 wires for (turn signal input) and left and right, i just tapped in 1 of those.

Yaris Hilton · 11-03-2009, 09:47 PM

Just by the bye, I've never seen anyone pay any attention to a car alarm going off. (Except maybe to fuss about the noise and wish somebody'd turn the thing off.)

11-03-2009, 12:44 PM	#1
sex View User's Garage Drives: 09 5DR Join Date: Jul 2009 Location: NY Posts: 310	Parking Light Flash Output vs Hazard Light Output I'm installing the Viper 3002 Model alarm on my '09 Yaris. I want the hazard light to flash when the alarm is armed/disarmed instead of the parking lights. I plan to connect the 10 A parking light flash output (H1/11 WHITE) to the Hazard Warning Signal Switch wire (17[4S] BLACK) instead of to the parking lights. In some alarm the parking light is still on for 30 seconds after the initial flash when disarmed. I don't want to be driving around with my hazard lights on. Does know if the Viper alarm only flashes when armed/disarmed? Or if the light is on for 30 seconds after the flash? Thanks for any input!

11-03-2009, 03:04 PM	#2
ezhacker1 Drives: Decepticon - Ravage Join Date: Nov 2008 Location: San Francisco Posts: 1,462	if i remember correctly, the hazard light switch, has 3 wires on it, dont remember color besides an obvious ground, probably white/red/black. I was lazy and went to tap into the hazards from there, one of the lines blew a fuse, then went to another and oddly enough it flashes my parkling lights...dont know why. 1 thing to note is i have 2 wires for (turn signal input) and left and right, i just tapped in 1 of those. __________________ Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY (08' USDM Liftback): ESUSE Fog Light Install v2.0	goku87	DIY / Maintenance / Service	127	02-19-2023 08:01 PM
How many forum posters does it take to change a light bulb?	silver_echo	Off-topic / Other Cars / Everything else Discussions	25	06-27-2011 02:50 AM
Viper Alarm Install	gwasabi	In Car Entertainment + Electronics (audio / video / alarm)	28	08-11-2010 03:57 PM
194 Parking Light Harness / Socket	bigsky2	Cosmetic Modifications (Exterior/Interior)	13	08-14-2009 03:04 AM
Parking Light replacement	Doug007	DIY / Maintenance / Service	1	11-06-2008 07:28 PM

11-03-2009, 09:47 PM	#3
Yaris Hilton Half a Bubble Off Plumb Drives: 2009 Yaris Sedan Join Date: Mar 2009 Location: Bristol, Tennessee, USA Posts: 1,593	Just by the bye, I've never seen anyone pay any attention to a car alarm going off. (Except maybe to fuss about the noise and wish somebody'd turn the thing off.)