|
04-04-2007, 10:28 AM | #1 |
The Beautification of Car
|
ZPI Pulley worth it?
I'm thinking about buy a ZPI pulley for my car, the only reason i want to buy it because someone is giving me a very good deal. But i heard alot of you guys said it's bad, got alot problems...
So in your opinions should i get it? or get a C One Pulley instead? |
04-04-2007, 10:33 AM | #2 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
NST09158RBG.jpg
NST FTW!!! ZPI's customer service is garbage and C-ONE anything is going to cost twice as much as anything made here in the USA. Get a hold of Mike on Aim and tell him that you're thinking about going with Zero Poop Industries. Tell him I sent you. ROFL! His screen name is NSTonAIM. |
04-04-2007, 11:09 AM | #3 |
Drives: 2005 Scion xB Join Date: Nov 2006
Location: The Black Hills of South Dakota
Posts: 1,059
|
[QUOTE=ChinoCharles;70904]Attachment 4237
NST FTW!!! QUOTE] You gotta calm down Chino. Here's what ZPI says about their pulley's, if you trust them. The ZPIracing crank pulley has been a very popular modification for the Scion community. We have been unhappy with the current manufacturing of our pulley with the quality control being loose and the ribs being over, up to .030. We thought it was time for a change. We took our pulley and sketch to an aerospace engineering and manufacturing firm that we do work with. They took our drawings and prototype designs and perfected it. The end result is a pulley that is stronger, 20% lighter and built to Aerospace quality standards. These pulleys are 100% defect free and you can rest assured that the amount of engineering that went in to these little pulleys will not damage a belt, bearing, crank etc… The new pulleys are 100% symmetrically balanced and will not create any noise on the vehicle which is typical of the lightweight pulleys. |
04-04-2007, 01:48 PM | #4 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
Do you trust ZPI?
Has ZPI given us any reason to trust them? |
04-04-2007, 03:28 PM | #5 | |
Drives: 2006 Yaris Join Date: Dec 2006
Location: USA
Posts: 203
|
Quote:
The logical thing would be for you to consider a few things to help you make your decision. It would be nice if we had a three way comparison of the three pulleys currently available but we do not, so we'll have to look at the data we do have. The C-One piece is Japanese and it twice the price of the American stuff, so based on that one thing alone you will probably stay away from it. Unless you are super balla! That leaves us with NST and ZPI offerings. http://www.zeropointindustries.net/s...roducts_id=319 http://www.nonstoptuning.com/pKitToyYaris.htm What are the prices of these pieces? ZPI $139.95 NST $118 What do each of these pieces weigh? ZPI 14oz NST 13oz Are both pieces hard anodized for better long term durability? ZPI no NST yes What colors are offered? ZPI silver NST red blue gray Does the company have a good track record recently for great service? ZPI seems like no NST seems like yes You can also search around a bit to find more information on each piece and each company. Then ask yourself what kind of products you want on your car. |
|
04-04-2007, 06:23 PM | #6 |
I'm getting the NST. In my opinion, just from this thread alone, if you haven't read anything else on this product. The NST is the obvious choice. But I have read more than just this thread on the subject matter. In my opinion the NST is probably the most praised, cheapest(price wise), efficiante aftermarket performance edition to the Yaris. NST FTW! <-(that was for Chino)
__________________
VI VI VI |
|
04-10-2007, 11:05 PM | #7 |
Toyota Newb!!
Drives: Yaris S Sedan w/ Aero Package! Join Date: Jun 2006
Location: Toronto
Posts: 228
|
I'm thinking of getting one too...heh heh..NST...
Sorry to hijack...but Chino...any way to get discount on the NST still?? The GB is over...awhile ago...but at that time i thought these pulleys were only for Manual Trans...hahaha..i have an auto..and then last week i was like hey i got that too!! (Sorry..car N00B!) Thanks. |
04-10-2007, 11:11 PM | #8 |
der Zeck
Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006
Location: Toledo, OH
Posts: 5,231
|
Love how this tread got jacked right away with NST, but it is the superior product.
I am wondering what those of you are going to do that did install the ZPI pulley are going to do when that thing oxidizes and falls apart because it is not anodized?
__________________
|
04-11-2007, 01:31 AM | #9 |
Drives: 2005 Scion xB Join Date: Nov 2006
Location: The Black Hills of South Dakota
Posts: 1,059
|
You know that saying, "theres no such thing as a dumd question"? Black Yaris just disproved it! Following that train of thought, Why aren't your brake calipers falling apart?
|
04-11-2007, 01:02 PM | #10 |
GIGA...DRILL...BREAKER!!!
Drives: Lagann. ;P Join Date: Feb 2006
Location: My own little world.
Posts: 717
|
I've never known aluminum to oxidize in the first place...?
~YR
__________________
Be polite. Be professional. But have a plan to kill everyone you meet. |
04-11-2007, 02:22 PM | #11 | |
Drives: 2006 Yaris Join Date: Dec 2006
Location: USA
Posts: 203
|
Quote:
Talk to any pulley expert, whether from Unorthodox, AEM, C-One, or any other big brand and ask them why they anodize their pulleys. Better yet you can ask Mike at NST, his screen name is NSTonAIM. The experts will tell you that hard anodizing is there for a reason. It costs more to build a pulley and hard anodize it, the end result is a stronger pulley that doesn't get all scratched up and also grips the belts better. Meanwhile ZPI wants to charge you more for a bare aluminum pulley NST has a track record around here for offering the best pulleys at the lowest prices. ZPI has a track record of offering a more expensive pulley, lower quality, and a record of bad service with their other products. They also have a track record of having bad service on other forums if you do some searching. Based on all the facts that are clear as day do you expect this thread to turn into a NST love fest or a ZPI one? |
|
04-11-2007, 03:15 PM | #12 | |
Drives: 2005 Scion xB Join Date: Nov 2006
Location: The Black Hills of South Dakota
Posts: 1,059
|
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: Nonstop Tuning CR-Lite Pulley | ChinoCharles | DIY / Maintenance / Service | 121 | 02-03-2010 05:41 AM |
ZPI Crank Pulley Installed! | Papamoon | Performance Modifications | 3 | 03-02-2007 11:35 AM |
unorthodox or Perrin Light Pulley | abdiel hiram | Performance Modifications | 2 | 02-27-2007 04:45 PM |
ZPI V. NST Pulley shootout | ZPIracing | Performance Modifications | 2 | 02-23-2007 04:45 PM |
ZPIracing Crank Pulley **NEW PRODUCT** | ZPIracing | Performance Modifications | 16 | 02-22-2007 04:21 PM |