Anyone still make headers for the 1NZ-FE? - Toyota Yaris Forums

mitch9521 · 10-14-2021, 05:59 PM

I was browsing headers for these cars the other night and from what I can find online, DC Sports, Megan Racing and pretty much everyone else has discontinued making headers for these cars.

OBX still makes them and are quite cheap but of course, you get what you pay for. Anyone run an OBX unit? I would be curious to hear real world reviews on the quality.

Otherwise, does anyone know of any other brands that still make headers for the NZ? Seems like aftermarket parts are drying up for these cars, Or at least the stuff we can easily get without paying astronomical shipping prices from Japan.

remcafee · 10-15-2021, 02:18 PM

obx headers dont have an o2 bung, very stupid, avoid obx headers, i would get the dc sport header, it has long primaries and collector, it is by far superior in performance compared to the others with super short primary tubes.

mitch9521 · 10-15-2021, 04:24 PM

Quote:

Originally Posted by remcafee

obx headers dont have an o2 bung, very stupid, avoid obx headers, i would get the dc sport header, it has long primaries and collector, it is by far superior in performance compared to the others with super short primary tubes.

Where do you get the DC Sports header? All of the places I have seen online say its been discontinued or out of stock. Hell, I'd buy a good used one of the price is right.

remcafee · 10-16-2021, 10:42 PM

ive had mine on for about 3 years i remember buying from andysautosport.com

speedworxs · 10-20-2021, 12:17 AM

i have one , but i think its for a 2nd or 3rd gen yaris (i have an 04 echo)
the difference being the curve to the center of the car, is too much for the echo, and will burn the shifter cables
i got it off a guy on facebook, worldwide yaris/vitz page or something... i can't remember

mitch9521 · 10-20-2021, 01:26 AM

Quote:

Originally Posted by speedworxs

i have one , but i think its for a 2nd or 3rd gen yaris (i have an 04 echo)
the difference being the curve to the center of the car, is too much for the echo, and will burn the shifter cables
i got it off a guy on facebook, worldwide yaris/vitz page or something... i can't remember

Exhaust stuff between an NCP91 and NCP131 will interchange, they're the same system.

SG07Yaris · 10-23-2021, 10:06 AM

I am now installing entire exhaust system on my ‘07 hatch. I bought the super cheap ECCPP header off of Amazon….
The header itself is fine. Great material. However the only problem I had was the head bolt pattern was incorrect. I had to make a template, mark, and drill to fix. 3/8” SS plate!
But now we have a header with 2” exhaust. I did away with the bosal type muffler also.
So if you want to do a custom fitment buy this. If you want a bolt on header DON’T BUY the Amazon ECCPP!

10-14-2021, 05:59 PM	#1
mitch9521 Gen 3 > Gen 2 Drives: NCP131, F-150 Join Date: Jul 2019 Location: Red Deer, AB Posts: 497	Anyone still make headers for the 1NZ-FE? I was browsing headers for these cars the other night and from what I can find online, DC Sports, Megan Racing and pretty much everyone else has discontinued making headers for these cars. OBX still makes them and are quite cheap but of course, you get what you pay for. Anyone run an OBX unit? I would be curious to hear real world reviews on the quality. Otherwise, does anyone know of any other brands that still make headers for the NZ? Seems like aftermarket parts are drying up for these cars, Or at least the stuff we can easily get without paying astronomical shipping prices from Japan. __________________ 2014 NCP131 5 Speed 2007 F150 4.2L 5 Speed 2013 Rav4 LE AWD Autotragic - Wife's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Depot Projectors....make an offer	GreenSpeed	Items for Sale by private party	12	04-03-2009 09:16 PM
Are We Still Stuck With the 4-1 Headers?	Sabretooth	Performance Modifications	31	02-20-2009 08:57 PM
Megan Racing 4 in 1 Headers	bronzebullet232	Performance Modifications	13	11-06-2008 07:07 PM
MEGAN HEADERS! < group buy price!	C2AUTOSPL	Sponsors Classifieds Area	20	09-17-2007 01:54 PM
headers echo	rayrayII	Southeast	0	09-11-2007 02:53 PM

10-15-2021, 02:18 PM	#2
remcafee Drives: 2007 Toyota Yaris 3 door Join Date: Sep 2018 Location: Arizona Posts: 403	obx headers dont have an o2 bung, very stupid, avoid obx headers, i would get the dc sport header, it has long primaries and collector, it is by far superior in performance compared to the others with super short primary tubes.

10-16-2021, 10:42 PM	#4
remcafee Drives: 2007 Toyota Yaris 3 door Join Date: Sep 2018 Location: Arizona Posts: 403	ive had mine on for about 3 years i remember buying from andysautosport.com

10-20-2021, 12:17 AM	#5
speedworxs Drives: \|Mr2 Join Date: Feb 2018 Location: Edmonton, Alberta Posts: 55	i have one , but i think its for a 2nd or 3rd gen yaris (i have an 04 echo) the difference being the curve to the center of the car, is too much for the echo, and will burn the shifter cables i got it off a guy on facebook, worldwide yaris/vitz page or something... i can't remember

10-23-2021, 10:06 AM	#7
SG07Yaris Oldbie Drives: 2007 three door Join Date: Oct 2021 Location: Ohio, USA Posts: 1	I am now installing entire exhaust system on my ‘07 hatch. I bought the super cheap ECCPP header off of Amazon…. The header itself is fine. Great material. However the only problem I had was the head bolt pattern was incorrect. I had to make a template, mark, and drill to fix. 3/8” SS plate! But now we have a header with 2” exhaust. I did away with the bosal type muffler also. So if you want to do a custom fitment buy this. If you want a bolt on header DON’T BUY the Amazon ECCPP!