Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > DIY / Maintenance / Service
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 06-08-2021, 10:55 PM   #1
LH123
 
Drives: 06 Yaris RS
Join Date: Dec 2013
Location: Canada
Posts: 7
OCS Bypass / SRS Light

I recently purchased a second-hand Occupant Classification Sensor Bypass Module (Rev. 2.0.0). After the installation of the module, the dash airbag light came on.

I tried the DTC code clearing procedure described in this post: https://www.yarisworld.com/forums/sh...d=1#post557473. When I turn the ignition on, the SRS light comes on solid the P/S and ABS light flash at about 5 flashes/second. Any ideas on how to clear the error codes?

Vehicle is 2006 RS 2-door hatchback, Canadian.

Last edited by LH123; 06-08-2021 at 11:53 PM.
LH123 is offline   Reply With Quote
Old 06-09-2021, 11:08 AM   #2
ern-diz
 
ern-diz's Avatar
 
Drives: 2007 Liftback
Join Date: Sep 2007
Location: CA all day
Posts: 3,796
Quote:
Originally Posted by LH123 View Post
I recently purchased a second-hand Occupant Classification Sensor Bypass Module (Rev. 2.0.0). After the installation of the module, the dash airbag light came on.

I tried the DTC code clearing procedure described in this post: https://www.yarisworld.com/forums/sh...d=1#post557473. When I turn the ignition on, the SRS light comes on solid the P/S and ABS light flash at about 5 flashes/second. Any ideas on how to clear the error codes?

Vehicle is 2006 RS 2-door hatchback, Canadian.
Are you certain you moved all driver seat sensors over? I got tripped up by one that has a magnet to it, which I had to stick to the seat bracket.
__________________
On Instagram

On Wheelwell
ern-diz is offline   Reply With Quote
Old 06-09-2021, 03:44 PM   #3
LH123
 
Drives: 06 Yaris RS
Join Date: Dec 2013
Location: Canada
Posts: 7
Quote:
Originally Posted by ern-diz View Post
Are you certain you moved all driver seat sensors over? I got tripped up by one that has a magnet to it, which I had to stick to the seat bracket.
I only removed the passenger's seat - the driver's seat is stock.
LH123 is offline   Reply With Quote
Old 06-09-2021, 04:47 PM   #4
ern-diz
 
ern-diz's Avatar
 
Drives: 2007 Liftback
Join Date: Sep 2007
Location: CA all day
Posts: 3,796
Quote:
Originally Posted by LH123 View Post
I only removed the passenger's seat - the driver's seat is stock.
Hmm...have you triple-checked that all connections are tight? You moved the seat belt pieces over, too, right?
__________________
On Instagram

On Wheelwell
ern-diz is offline   Reply With Quote
Old 06-09-2021, 08:02 PM   #5
LH123
 
Drives: 06 Yaris RS
Join Date: Dec 2013
Location: Canada
Posts: 7
Quote:
Originally Posted by ern-diz View Post
Hmm...have you triple-checked that all connections are tight? You moved the seat belt pieces over, too, right?
I am using the bypass module shown in this document: https://www.metaltech4x4.com/content...n%20Rev2.0.pdf. I completed step 1, skipped the optional step 2, and am having trouble clearing the fault codes as described in step 3. Step 4 will not be necessary as my seats do not contain side airbags. All connectors are seated correctly.
LH123 is offline   Reply With Quote
Old 06-09-2021, 10:49 PM   #6
LH123
 
Drives: 06 Yaris RS
Join Date: Dec 2013
Location: Canada
Posts: 7
Quote:
Originally Posted by ern-diz View Post
Hmm...have you triple-checked that all connections are tight? You moved the seat belt pieces over, too, right?
Turns out you were correct. I didn't think that the seat belt connector had to be connected to keep the system happy. When I hooked that up, the fault cleared. Thanks for your help!
LH123 is offline   Reply With Quote
Old 06-10-2021, 10:30 AM   #7
ern-diz
 
ern-diz's Avatar
 
Drives: 2007 Liftback
Join Date: Sep 2007
Location: CA all day
Posts: 3,796
Yes, the seat belts are part of the overall SRS system. My pleasure, glad you got it sorted :)
__________________
On Instagram

On Wheelwell
ern-diz is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
I finally cracked the Odometer and SRS ECU code CTScott DIY / Maintenance / Service 22 10-27-2016 01:50 AM
Do your side windows wipe clear? CoryM DIY / Maintenance / Service 6 10-29-2013 11:50 PM
P1345 Error code Nicholas2003 DIY / Maintenance / Service 0 02-03-2013 06:47 AM
Error DTC B1901-B1906 how repair?? Carlosk1 DIY / Maintenance / Service 2 08-30-2010 05:15 PM
Error DTC B1901-B1906 Carlosk1 Central and South America 0 08-29-2010 09:48 PM


All times are GMT -4. The time now is 05:01 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.