Just painted my headlights - Toyota Yaris Forums

jbann · 07-09-2006, 07:57 PM

just painted my headlights and damn are they hot. need help posting pics *updated*
n e interested i do them for $150 my local area as well they can be shipped to me price is negotable for my fellow yaris owners sedans are also welcome. Im in union, nj. takes me about 3hrs give or take. http://s101.photobucket.com/albums/m75/jbann7/Yaris/

*Chris07LB* · 07-09-2006, 08:50 PM

Quote:

Originally Posted by jbann

just painted my headlights and damn are they hot. need help posting pics

Email it, ill post it.

Where in Jersey btw?

jbann · 07-10-2006, 09:22 AM

ok going to re take pics now and post in about 20 mins

Blenjar · 07-10-2006, 10:30 AM

its passed 20 mins..hurry up!!

jbann · 07-10-2006, 10:34 AM

pics are up click the link and let me kno what u think

Ran Kizama · 07-10-2006, 11:00 AM

Looks clean man. I'm looking into doing mine the same way but black. Also gotta remove that stupid amber reflector. Good job!

mikeukrainetz · 07-10-2006, 11:23 AM

So ive been trying to do the same thing - as Ive posted but havent had any luck getting the headlights out. Did you have to pull off the front bumper? If you could post a quick how-to of just getting them that would be great.

Blenjar · 07-10-2006, 11:49 AM

looks nice!

-- Blen

jbann · 07-10-2006, 01:25 PM

Thanks every1. quick how to remove headlights: theres 6 plastic clips across top bumper remove. 10mm bolt ontop of head light remove, now look by fenderwells remove 1 plastic clip pop fender forward. 10mm bolt on corner of headlight where fender is. now pull bumper forward and look on headlight towards radiator 10mm bolt remove and POP goes the weasel(headlight) i'll post pics and more detail later n e 1 need help let me kno

lowkey · 07-10-2006, 01:31 PM

Looks good!

mikeukrainetz · 07-10-2006, 01:55 PM

sweet thanks, ill be trying it again this weekend.

*Chris07LB* · 07-10-2006, 03:00 PM

Going to try and hook up with you soon.. Are you interested in HIDs by any chance?

I will be checking to see if I can do a Group Buy soon on here.

jbann · 07-12-2006, 07:40 AM

cool definitly interested in hids let me when u wanna hook up. ill do ur lights if u want me to or help u ur hids are hot

hasher22 · 08-19-2006, 01:37 AM

TUTORIAL

Items i used
- Phillips screw driver (the + head one)
- Black "Power Plus Spray Brush" Spray Paint 150g
(you might want to get a bigger size if your are painting the majority of the headlights)
- Maskin tape

1- Start by opening your hood (DUH)
2- You will see these little black pivet thingy's....you need to take all of them out. To get them out push the little circle in the middle of the black things and push them up. to get them back in again do the opposite.

3- There will be some on the side of the bumper next to the wheels so u can get them out too.
4-Next thing up - look under the car, there will be screws there. Take them out with a PHILLIPS screwdriver.
5 - Now your ready to take off the bumper. (As for me i didnt take it off, i just pulled it off half way, while half of it was still attached to the car) To take off the bumper you need to put a bit of pulling force. 1st of all PULL each side of the bumper with a bit of force (dont worry i wont snap or bend the bumper)

6- now its time to remove the lights.........first of all there are 3 screws that are holding the lights in place. Get them out!!!

7-Now take off the head lights and of course the wires are connected to it.

8-Now thats done, do it to the other one!!! when both headlights are off, shut the hood, lock up ur car and get those things into your OVEN!...lol

(SORRY NO PICS FOR THIS SECTION!!)
9-Ok put your headlights into the oven and set it to 250 - 300 Degrees (I put mine on 250. 250 is enough). Leave it in there for about 5 mins!! DONT LEAVE IT FOR 5 MINS STRAIGHT!!! KEEP CHECKING IT SO IT DOESNT MELT!!
10- The gooey REALLY STICKY glue should all be LOOSENED up, so take it out of the oven and GET A BUTTER KNIFE and try to seperate it with the butter knife!!! (if your doin it with ur hands it will be harder, i suggest get a butter knife and stick it between the black and the clear plastic and bend the knife upwards so it will pop out!!)
11 - once its sperated it will look like this (thats just the gooey glue)

12- Now get the parts you wanna SPRAY paint. go outside and spray IT! if you are paintin it black, have about 3-5 coats on. AND REMEMBER NOT TO SPRAY TOO CLOSE, becuz there will be dry drip marks on it. you dont want that. it doesnt matter if there are unfinished patches in your 1st - 2nd coat. the 3rd - 5th coat will cover it all up! and it will look great! With every coat leave it in the sun to dry for about 10 mins then go to ur 2nd coat and so on.

Oh yea you might wanna cover the spaces u dont want to spray black, red, blue whatever colour with good masking tape.

12 - once everything is painted and your happy PUT IT ALL BACK TOGETHER :)

(ive just painted the top bit....thats all i wanted done...)

13- now go back to ur car, put in the headlights, attach the bumper, and put in the little black plastic thingys and the screws back in.

THERE U GO!! WALLA!! you now have sexy black head lights....

hasher22 · 08-03-2006, 06:45 AM

OMG that is so hot its not funny

i wanted to make my head lights black....but i dont even know where to start. :(

is it an easy process??? im sick on the stocked head lights.

Would be cool if you made a little tutorial!!!

fnkngrv · 08-03-2006, 09:42 AM

I think that I like it, but there is a lot of reflection in your pics...anyway that you can take more?

*Chris07LB* · 08-03-2006, 10:49 AM

Im still waiting for a reply to my PM from weeks ago...

Chaad32 · 08-03-2006, 05:20 PM

A tutorial would be nice....I really want to do this but I'm affraid that if I crack open my headlights condensation will start to appear.

07-09-2006, 07:57 PM	#1
jbann Drives: 07 yaris 3dr mblue Join Date: Jul 2006 Location: Jersey Posts: 15	Just painted my lights Updated just painted my headlights and damn are they hot. need help posting pics updated n e interested i do them for $150 my local area as well they can be shipped to me price is negotable for my fellow yaris owners sedans are also welcome. Im in union, nj. takes me about 3hrs give or take. http://s101.photobucket.com/albums/m75/jbann7/Yaris/ Last edited by jbann; 07-10-2006 at 10:33 AM. Reason: add pics

07-10-2006, 11:00 AM	#6
Ran Kizama That Anime Guy View User's Garage Drives: 5-Speed Liftback Join Date: Jul 2006 Location: Canton, GA Posts: 543	Looks clean man. I'm looking into doing mine the same way but black. Also gotta remove that stupid amber reflector. Good job! __________________

08-19-2006, 01:37 AM	#14
hasher22 Look mum no stars!! Drives: Toyota Yaris 06 Join Date: Aug 2006 Location: Australia Sydney Posts: 1,469	TUTORIAL Items i used - Phillips screw driver (the + head one) - Black "Power Plus Spray Brush" Spray Paint 150g (you might want to get a bigger size if your are painting the majority of the headlights) - Maskin tape 1- Start by opening your hood (DUH) 2- You will see these little black pivet thingy's....you need to take all of them out. To get them out push the little circle in the middle of the black things and push them up. to get them back in again do the opposite. 3- There will be some on the side of the bumper next to the wheels so u can get them out too. 4-Next thing up - look under the car, there will be screws there. Take them out with a PHILLIPS screwdriver. 5 - Now your ready to take off the bumper. (As for me i didnt take it off, i just pulled it off half way, while half of it was still attached to the car) To take off the bumper you need to put a bit of pulling force. 1st of all PULL each side of the bumper with a bit of force (dont worry i wont snap or bend the bumper) 6- now its time to remove the lights.........first of all there are 3 screws that are holding the lights in place. Get them out!!! 7-Now take off the head lights and of course the wires are connected to it. 8-Now thats done, do it to the other one!!! when both headlights are off, shut the hood, lock up ur car and get those things into your OVEN!...lol (SORRY NO PICS FOR THIS SECTION!!) 9-Ok put your headlights into the oven and set it to 250 - 300 Degrees (I put mine on 250. 250 is enough). Leave it in there for about 5 mins!! DONT LEAVE IT FOR 5 MINS STRAIGHT!!! KEEP CHECKING IT SO IT DOESNT MELT!! 10- The gooey REALLY STICKY glue should all be LOOSENED up, so take it out of the oven and GET A BUTTER KNIFE and try to seperate it with the butter knife!!! (if your doin it with ur hands it will be harder, i suggest get a butter knife and stick it between the black and the clear plastic and bend the knife upwards so it will pop out!!) 11 - once its sperated it will look like this (thats just the gooey glue) 12- Now get the parts you wanna SPRAY paint. go outside and spray IT! if you are paintin it black, have about 3-5 coats on. AND REMEMBER NOT TO SPRAY TOO CLOSE, becuz there will be dry drip marks on it. you dont want that. it doesnt matter if there are unfinished patches in your 1st - 2nd coat. the 3rd - 5th coat will cover it all up! and it will look great! With every coat leave it in the sun to dry for about 10 mins then go to ur 2nd coat and so on. Oh yea you might wanna cover the spaces u dont want to spray black, red, blue whatever colour with good masking tape. 12 - once everything is painted and your happy PUT IT ALL BACK TOGETHER :) (ive just painted the top bit....thats all i wanted done...) 13- now go back to ur car, put in the headlights, attach the bumper, and put in the little black plastic thingys and the screws back in. THERE U GO!! WALLA!! you now have sexy black head lights.... Last edited by hasher22; 08-19-2006 at 01:50 AM.

08-03-2006, 09:42 AM	#16
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	I think that I like it, but there is a lot of reflection in your pics...anyway that you can take more? __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

08-03-2006, 05:20 PM	#18
Chaad32 Drives: 2007 Liftback Join Date: Jul 2006 Location: USA Posts: 334	A tutorial would be nice....I really want to do this but I'm affraid that if I crack open my headlights condensation will start to appear. __________________ 2007 Liftback Blazing Blue Cold Weather, Convenience Package, Arm Rest, Floor mats, Weathertech vent visors

07-10-2006, 09:22 AM	#3
jbann Drives: 07 yaris 3dr mblue Join Date: Jul 2006 Location: Jersey Posts: 15	ok going to re take pics now and post in about 20 mins

07-10-2006, 10:30 AM	#4
Blenjar View User's Garage Drives: Black Yaris 07 HB Join Date: Apr 2006 Location: CT Posts: 1,548	its passed 20 mins..hurry up!!

07-10-2006, 10:34 AM	#5
jbann Drives: 07 yaris 3dr mblue Join Date: Jul 2006 Location: Jersey Posts: 15	pics are up click the link and let me kno what u think

07-10-2006, 11:23 AM	#7
mikeukrainetz View User's Garage Drives: 2006 Toyota Yaris Join Date: May 2006 Location: Canada Posts: 564	So ive been trying to do the same thing - as Ive posted but havent had any luck getting the headlights out. Did you have to pull off the front bumper? If you could post a quick how-to of just getting them that would be great.

07-10-2006, 11:49 AM	#8
Blenjar View User's Garage Drives: Black Yaris 07 HB Join Date: Apr 2006 Location: CT Posts: 1,548	looks nice! -- Blen

07-10-2006, 01:25 PM	#9
jbann Drives: 07 yaris 3dr mblue Join Date: Jul 2006 Location: Jersey Posts: 15	Thanks every1. quick how to remove headlights: theres 6 plastic clips across top bumper remove. 10mm bolt ontop of head light remove, now look by fenderwells remove 1 plastic clip pop fender forward. 10mm bolt on corner of headlight where fender is. now pull bumper forward and look on headlight towards radiator 10mm bolt remove and POP goes the weasel(headlight) i'll post pics and more detail later n e 1 need help let me kno

07-10-2006, 01:31 PM	#10
lowkey Drives: 90 Integra, 07 Yaris Join Date: May 2006 Location: Winnipeg/Manitoba Posts: 47	Looks good!

07-10-2006, 01:55 PM	#11
mikeukrainetz View User's Garage Drives: 2006 Toyota Yaris Join Date: May 2006 Location: Canada Posts: 564	sweet thanks, ill be trying it again this weekend.

07-10-2006, 03:00 PM	#12
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Going to try and hook up with you soon.. Are you interested in HIDs by any chance? I will be checking to see if I can do a Group Buy soon on here.

07-12-2006, 07:40 AM	#13
jbann Drives: 07 yaris 3dr mblue Join Date: Jul 2006 Location: Jersey Posts: 15	cool definitly interested in hids let me when u wanna hook up. ill do ur lights if u want me to or help u ur hids are hot

08-03-2006, 06:45 AM	#15
hasher22 Look mum no stars!! Drives: Toyota Yaris 06 Join Date: Aug 2006 Location: Australia Sydney Posts: 1,469	OMG that is so hot its not funny i wanted to make my head lights black....but i dont even know where to start. :( is it an easy process??? im sick on the stocked head lights. Would be cool if you made a little tutorial!!!

08-03-2006, 10:49 AM	#17
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Im still waiting for a reply to my PM from weeks ago...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
who is gonna be the first person to "bake" the headlights?	birdy	Cosmetic Modifications (Exterior/Interior)	44	01-11-2007 02:48 PM
Painted Lamps	Kitt	Cosmetic Modifications (Exterior/Interior)	21	09-27-2006 01:30 PM
Clear Corner Headlights	Ran Kizama	Cosmetic Modifications (Exterior/Interior)	6	07-06-2006 02:43 PM
Headlights	slvryaris	Cosmetic Modifications (Exterior/Interior)	2	06-26-2006 06:49 PM
LB headlights	Supa Lao	Cosmetic Modifications (Exterior/Interior)	0	06-22-2006 11:04 AM