|
12-30-2008, 11:28 PM | #1 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
Airflow over the Liftback's rear window
I had some time on my hand so I stuck little pieces of yarn on the rear window of my liftback to see what the airflow was like back there. You can see there's turbulence at the bottom of the window. Maybe caused by the wiper?
I'll be installing Vortekz generators on the roof tomorrow and will make a another video to see if they made any difference. Best viewed in high quality. http://www.youtube.com/watch?v=8mO0NxNsv1k
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
12-30-2008, 11:37 PM | #2 |
Joey
Drives: '14 Scion xD 5-speed Join Date: Oct 2008
Location: El Monte, Ca
Posts: 3,529
|
I swear I saw another thread on this a while back...
Interesting vid, BTW I also can't tell if it's either the window wiper or sudden drop of the rear from the roof that's causing the turbulence. Maybe it'll all go away if you mount a spoiler?
__________________
Formerly owned Met-Met. '07 Yaris LB 5-speed. A forum post should be like a skirt: Long enough to cover the subject but short enough to keep things interesting. "I don't have an anger problem. I have an idiot problem." -Hank Hill |
12-30-2008, 11:40 PM | #3 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
I talked about this in another thread and posted a picture of a sedan with the threads on it. I finally decided to do it for myself since I'll be playing with the aerodynamics.
If the Vortekz don't have any impact, I'll buy a rear spoiler.
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
12-31-2008, 12:07 AM | #4 |
Drives: 08 BB LB Join Date: Dec 2008
Location: Maiden, NC
Posts: 785
|
Second row down 5th from the right, the yarn is stuck.
|
12-31-2008, 12:11 AM | #5 |
dude, why haven't i done this, grand idea with the yarn and the video, good stuff. I'm really interested to see where this goes.
|
|
12-31-2008, 12:14 AM | #6 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
Wow, you're right. I had to watch the whole video again to see if the little sucker would ever break free. I'll free it tomorrow. Thanks.
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
12-31-2008, 12:18 AM | #7 |
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
I know the VG's I installed are actually working. Before, when there was condensation on the rear window on my Vios (pre VG's), the entire window would be covered with it while driving on the highway. After I put on the VG's, I can see triangles forming while driving on the highway...so I would assume that the VG's are doing something. hehe.
|
12-31-2008, 12:20 AM | #8 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
The VG's work better on your sedan because you can line them up straight across. I'm going to play with my placement due to the hatch.
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
12-31-2008, 12:22 AM | #9 |
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
|
12-31-2008, 12:27 AM | #10 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
I had to steal a picture from blacksandiegovitz but the hatch line curves out. The edge of the roofline is straight.
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
12-31-2008, 12:39 AM | #11 |
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
Yeah, the LB's arch plus the sudden drop might affect the placement of the VG's.
|
12-31-2008, 01:16 AM | #12 |
Drives: Silver Hatchback Join Date: Jul 2006
Location: Tennessee
Posts: 150
|
Your seat belt is dangling in the way you need to push it up into the plastic holder. I doubt the VG will actually affect airflow that much, it may calm it a bit, but it will not help with the void that the hatch has no choice but to make.
|
12-31-2008, 01:18 AM | #13 |
Drives: Silver Hatchback Join Date: Jul 2006
Location: Tennessee
Posts: 150
|
Either way I'm looking forward to your results.
|
12-31-2008, 02:12 AM | #14 |
Drives: '08 Yaris Join Date: Oct 2008
Location: SoCal (Jamul)
Posts: 97
|
In order for a vortex generator to function, there needs to be sufficient airflow. As you can see from the top two rows of yarn in the video, there isn't much flow there. I drive a lot of dirt roads, and I can verify that a lot of dust accumulates on the rear window, and fast runs down the freeway don't blow much off. I don't think any vortex generator will do much...
|
12-31-2008, 06:12 PM | #15 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Now we should try this with the spoiler and see if there is less airflow down the window with that.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
12-31-2008, 10:33 PM | #16 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
Ok, here's a video of the airflow after the installation of the Vortekz generators:
http://www.youtube.com/watch?v=0D_c6CayIT4 For reference, here's before: http://www.youtube.com/watch?v=8mO0NxNsv1k Watch in high quality. Here are some pictures of the Vortekz. I misplaced the 3M 2-sided tape inserts so I'm using the next best thing for now...blue painter's tape. You can definitely see that the top row of yarn is flying around differently now. So what does that prove overall? Who knows. They look cool so I'll leave them on once I find the 2-sided adhesive tracks.
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
01-01-2009, 01:11 AM | #17 |
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
Looks much calmer now. Is it just me, or is the VG nearest in the first pic slightly over the edge?
I like how you paint-matched them too. |
01-01-2009, 01:53 AM | #18 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
Good eye. The leftmost VG is just slightly over the edge. I'll move it forward when I mount them permanently. They cannot go much further forward because when I open the hatch, they almost push against the rear of the roof.
I think the air across the back is smoother too. And they look pretty sharp.
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
When will the Yaris hit the showrooms at dealers? | Petrolhead | New YARIS Purchase Forum | 181 | 11-28-2011 07:03 AM |
Shattered rear window | nemelek | General Yaris / Vitz Discussion | 20 | 12-29-2008 02:38 AM |
Rear window washer - liftback | boris13 | DIY / Maintenance / Service | 24 | 06-05-2007 04:20 PM |
LB Rear Window Sprayer, spry or drizzle? | dlinkwit27 | DIY / Maintenance / Service | 4 | 06-04-2007 09:49 PM |
CAN TOYOTA RETROFIT NON-FIXED REAR WINDOW? | pennsylvania girl | Cosmetic Modifications (Exterior/Interior) | 8 | 04-22-2007 01:47 AM |