P0300 Random / Multiple Cylinder Misfire DetectedCylinder 3 misfire - Toyota Yaris Forums

dante2086 · 05-14-2011, 09:09 AM

P0300 Random / Multiple Cylinder Misfire Detected
P0303 Cylinder 3 Misfire Detected

My car was showing the check engine light. Took it for a diagnostics and those two codes came up.
The dude who did it didn't even touch the engine, and the light diappeared and he said the car was fixed.

1. Is that possible
2.If it isn't, then what could be wrong exactly and how can it be fixed.

BLH · 05-14-2011, 06:24 PM

May come back.
Most scanners have the ability to clear the codes and make the light go off.

Bluevitz-rs · 05-15-2011, 09:38 AM

do you hit the limiter a lot?

dante2086 · 05-15-2011, 02:45 PM

No, I don't hit it that much.
But when the check engine light is on, I noticed it's easier to hit.
How the car detected the problem was when I was travelling.
I hit 120 kmph once, and the light flashed so I slowed down.
The light then disappeared, then when I hit that speed again, the light flashed and stayed.
I took it somewhere, and they reset it. Then when travelling back the light came back, the same way it did before.
Before this, my car hit 170 kmph without sneezing.

Bluevitz-rs · 05-15-2011, 04:36 PM

If the light is flashing you're possibly doing damage to the cat. It's a warning to let off the throttle or risk permanent damage.

Try running a few tanks of premium fuel and some injection cleaner through.

05-14-2011, 09:09 AM	#1
dante2086 Drives: Toyota Yaris 07 Join Date: May 2010 Location: Nigeria Posts: 25	P0300 Random / Multiple Cylinder Misfire DetectedCylinder 3 misfire P0300 Random / Multiple Cylinder Misfire Detected P0303 Cylinder 3 Misfire Detected My car was showing the check engine light. Took it for a diagnostics and those two codes came up. The dude who did it didn't even touch the engine, and the light diappeared and he said the car was fixed. 1. Is that possible 2.If it isn't, then what could be wrong exactly and how can it be fixed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
yaris timing belt	phenoyz	General Yaris / Vitz Discussion	16	02-24-2015 01:05 AM
NEED ENGINE CHECK LIGHT CODE LIST	Attitude	Forced Induction Forum	12	04-11-2011 06:38 PM
Multiple cylinder misfire under boost	LtNoogie	Forced Induction Forum	13	11-02-2009 04:44 AM
misfire on no 1 cylinder	beemer dave	DIY / Maintenance / Service	9	05-25-2009 08:13 PM

05-14-2011, 06:24 PM	#2
BLH Drives: 2007 Yaris Sedan Join Date: Apr 2009 Location: CT Posts: 262	May come back. Most scanners have the ability to clear the codes and make the light go off.

05-15-2011, 09:38 AM	#3
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,958	do you hit the limiter a lot?

05-15-2011, 02:45 PM	#4
dante2086 Drives: Toyota Yaris 07 Join Date: May 2010 Location: Nigeria Posts: 25	No, I don't hit it that much. But when the check engine light is on, I noticed it's easier to hit. How the car detected the problem was when I was travelling. I hit 120 kmph once, and the light flashed so I slowed down. The light then disappeared, then when I hit that speed again, the light flashed and stayed. I took it somewhere, and they reset it. Then when travelling back the light came back, the same way it did before. Before this, my car hit 170 kmph without sneezing.

05-15-2011, 04:36 PM	#5
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,958	If the light is flashing you're possibly doing damage to the cat. It's a warning to let off the throttle or risk permanent damage. Try running a few tanks of premium fuel and some injection cleaner through.