Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Second Generation Toyota Yaris Main Rooms > Regional Forums > Middle East
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 06-03-2010, 02:33 PM   #1
syntax
 
syntax's Avatar
 
Drives: Yaris Sedan 2010 "shadow"
Join Date: Mar 2010
Location: Riyadh,KSA
Posts: 4,514
DIY A/C low pressure line insulation

Mga kayaris ! just did our A/C low pressure line insulation with "idol" jonimac, meron talaga difference kapag naka insulate, hindi lagi nag cclick ang compressor ng A/C, unlike before na every 10mins ata or 5 mins you can hear a clicking sound because of the compressor, we took our time figuring how to bend the insulator/rubber and cable tie the line, pero sulit.

IDOL ! post mo na ung mga pics wehehehehe
syntax is offline   Reply With Quote
Old 06-03-2010, 02:50 PM   #2
duke_afterdeath
 
duke_afterdeath's Avatar
 
Drives: 2008 Yaris Sedan
Join Date: Apr 2009
Location: Riyadh, Saudi Arabia
Posts: 2,468
ok yan sana magawa ko din
duke_afterdeath is offline   Reply With Quote
Old 06-03-2010, 02:53 PM   #3
syntax
 
syntax's Avatar
 
Drives: Yaris Sedan 2010 "shadow"
Join Date: Mar 2010
Location: Riyadh,KSA
Posts: 4,514
no problema duke, tutulungan kita dyan, malapit lang ako sa inyo, you just need 3/4 size ( around 1 meter long) insulator and 3/8 sized insulators ( 1 meter ulit)at black cable ties.
syntax is offline   Reply With Quote
Old 06-03-2010, 04:10 PM   #4
jonimac
 
jonimac's Avatar
 
Drives: Yaris Sedan 2010
Join Date: Mar 2010
Location: KSA
Posts: 1,415
Send a message via Yahoo to jonimac
Quote:
Originally Posted by syntax View Post
Mga kayaris ! just did our A/C low pressure line insulation with "idol" jonimac, meron talaga difference kapag naka insulate, hindi lagi nag cclick ang compressor ng A/C, unlike before na every 10mins ata or 5 mins you can hear a clicking sound because of the compressor, we took our time figuring how to bend the insulator/rubber and cable tie the line, pero sulit.

IDOL ! post mo na ung mga pics wehehehehe
Pasensya na bro, lumabas pa kasi me sandali... uploading na. hehehe
Attached Images
 
jonimac is offline   Reply With Quote
Old 06-03-2010, 04:28 PM   #5
jonimac
 
jonimac's Avatar
 
Drives: Yaris Sedan 2010
Join Date: Mar 2010
Location: KSA
Posts: 1,415
Send a message via Yahoo to jonimac
after pix - low pressure pipe insulation

... the easy part
Name:  DSC02497.JPG
Views: 711
Size:  195.1 KB

dito medyo pasensya na kailangan... bilib ako sa kamay ni syntax - BIHASA!
Name:  DSC02498.JPG
Views: 706
Size:  215.2 KB

diskarte lang dito... 2 heads are better than 1
Name:  DSC02499.JPG
Views: 705
Size:  248.0 KB

after that part, madali na ulit
Name:  DSC02500.JPG
Views: 716
Size:  191.1 KB

after that, tapos na!
Name:  DSC02502.JPG
Views: 697
Size:  239.1 KB


finishing touches na lang... cutting of excess cable ties... ano pa ba bro?
jonimac is offline   Reply With Quote
Old 06-03-2010, 04:34 PM   #6
syntax
 
syntax's Avatar
 
Drives: Yaris Sedan 2010 "shadow"
Join Date: Mar 2010
Location: Riyadh,KSA
Posts: 4,514
ayos mga pics idol ! sana ma try din ng mga kayaris, if ever na may gusto mag try sabihin nyo lang we are willing to help.
syntax is offline   Reply With Quote
Old 06-03-2010, 04:51 PM   #7
jonimac
 
jonimac's Avatar
 
Drives: Yaris Sedan 2010
Join Date: Mar 2010
Location: KSA
Posts: 1,415
Send a message via Yahoo to jonimac
Name:  DSC02497.JPG
Views: 687
Size:  195.1 KB

we almost forgot this portion pala. what we did here was to cut 2 pieces with same length of the insulator, and wrapped this thing up. a little bit of art to make it look nice, kasi bulky sya.


shukran synatx sa extra cable ties... pandag-dag dun sa mga may siwang. also sa assistance, like you've said mahirap kung isa lang gagawa.
jonimac is offline   Reply With Quote
Old 06-03-2010, 05:06 PM   #8
syntax
 
syntax's Avatar
 
Drives: Yaris Sedan 2010 "shadow"
Join Date: Mar 2010
Location: Riyadh,KSA
Posts: 4,514
no problem "IDOL" , medyo mahirap nga kung isa lang ang gagawa, dapat talaga tulong tulong tayo sa mga DIY projects na yan.,

on the side note pre, your unusually high idle rpm got me thinkin' paki observe nga kung laging ganun, since nabili mo yan ganun na ba yan? tingnan mo rin ito:

http://www.yarisworld.com/forums/sho...=diy+grounding
syntax is offline   Reply With Quote
Old 06-03-2010, 05:20 PM   #9
jonimac
 
jonimac's Avatar
 
Drives: Yaris Sedan 2010
Join Date: Mar 2010
Location: KSA
Posts: 1,415
Send a message via Yahoo to jonimac
Quote:
Originally Posted by syntax View Post
no problem "IDOL" , medyo mahirap nga kung isa lang ang gagawa, dapat talaga tulong tulong tayo sa mga DIY projects na yan.,

on the side note pre, your unusually high idle rpm got me thinkin' paki observe nga kung laging ganun, since nabili mo yan ganun na ba yan? tingnan mo rin ito:

http://www.yarisworld.com/forums/sho...=diy+grounding
thanks... couldn't tell bro, obserbahan ko nga.

okay itong GROUNDING KIT, meron ba nito dito?
jonimac is offline   Reply With Quote
Old 06-03-2010, 05:40 PM   #10
syntax
 
syntax's Avatar
 
Drives: Yaris Sedan 2010 "shadow"
Join Date: Mar 2010
Location: Riyadh,KSA
Posts: 4,514
hehehehehe.. i can smell another DIY project,
syntax is offline   Reply With Quote
Old 06-03-2010, 06:20 PM   #11
jonimac
 
jonimac's Avatar
 
Drives: Yaris Sedan 2010
Join Date: Mar 2010
Location: KSA
Posts: 1,415
Send a message via Yahoo to jonimac
Quote:
Originally Posted by syntax View Post
hehehehehe.. i can smell another DIY project,

sinasabi ko na nga be eh! do we need the same layout or just some of them?
jonimac is offline   Reply With Quote
Old 06-03-2010, 06:28 PM   #12
syntax
 
syntax's Avatar
 
Drives: Yaris Sedan 2010 "shadow"
Join Date: Mar 2010
Location: Riyadh,KSA
Posts: 4,514
we'll try at least 5 points to ground enough na cguro un..research muna tayo para dito, or do we start a new thread?
syntax is offline   Reply With Quote
Old 06-03-2010, 06:50 PM   #13
jonimac
 
jonimac's Avatar
 
Drives: Yaris Sedan 2010
Join Date: Mar 2010
Location: KSA
Posts: 1,415
Send a message via Yahoo to jonimac
okay ka lang bro? mainit ba dyan? relax lang tol... be hehehe

need to find those terminals(crimp type), check ako sa electrical supplies. we need some flexible high grade grounding wires, improvise version tayo sa negative terminal block then i-lace natin ng maayos, para naman di maging mukhang pansit yun sa engine bay natin.

gastos na naman

matulog kana! kung anu-ano nakikita mo! bwahahahaa
jonimac is offline   Reply With Quote
Old 06-04-2010, 06:49 AM   #14
trebparadise
 
Drives: sedan yaris y
Join Date: Feb 2010
Location: Yanbu
Posts: 83
Ayus talaga mga ka Yaris sa Riyadh. khatir malum talaga. basta ako taga gaya-gaya lang. gagawin ko rin to ASAP. shukran sa mga input.
trebparadise is offline   Reply With Quote
Old 06-04-2010, 03:53 PM   #15
syntax
 
syntax's Avatar
 
Drives: Yaris Sedan 2010 "shadow"
Join Date: Mar 2010
Location: Riyadh,KSA
Posts: 4,514
@treb lahat tayo dito share share ng info para sa mga yaris natin. all ideas are welcome
syntax is offline   Reply With Quote
Old 06-05-2010, 05:29 AM   #16
bluecris44
 
bluecris44's Avatar
 
Drives: Yaris Sedan 2009 - "Angel"
Join Date: Mar 2010
Location: Riyadh, KSA
Posts: 112
Send a message via Yahoo to bluecris44
Quote:
Originally Posted by trebparadise View Post
Ayus talaga mga ka Yaris sa Riyadh. khatir malum talaga. basta ako taga gaya-gaya lang. gagawin ko rin to ASAP. shukran sa mga input.

Honga! I agree with you treb!
bluecris44 is offline   Reply With Quote
Old 06-05-2010, 05:31 AM   #17
bluecris44
 
bluecris44's Avatar
 
Drives: Yaris Sedan 2009 - "Angel"
Join Date: Mar 2010
Location: Riyadh, KSA
Posts: 112
Send a message via Yahoo to bluecris44
Quote:
Originally Posted by syntax View Post
hehehehehe.. i can smell another DIY project,
You smelled it right bro!
bluecris44 is offline   Reply With Quote
Old 06-05-2010, 05:51 AM   #18
syntax
 
syntax's Avatar
 
Drives: Yaris Sedan 2010 "shadow"
Join Date: Mar 2010
Location: Riyadh,KSA
Posts: 4,514
@blue gusto mo itry ung insulation, kailangan mo lang ng at least 1 meter na 3/4 insulation tube,black cable ties ang pinakaimportante basahang medyo malaki na basa ( yayakapin mo kasi ang engine block para maicable ties ung nasa gilid) wehehehe

post mo lang dito if you need help
syntax is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY: A/C Insulation texkid DIY / Maintenance / Service 254 08-02-2016 03:33 AM
A/C Not Blowing Cold Air...among other things yarisitis DIY / Maintenance / Service 38 07-28-2016 04:00 PM
Intermittent low oil pressure light. Inspector14 DIY / Maintenance / Service 23 03-29-2010 01:46 PM
screw more psi in the tires. thebarber Fuel Economy Forum 43 05-04-2009 04:46 PM


All times are GMT -4. The time now is 04:18 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.