H4 HID Kit Bulbs in Stock Headlights - Toyota Yaris Forums

bigsky2 · 08-11-2009, 06:20 AM

I'm just trying to confirm if the following aftermarket H4 Hi/Lo HID bulbs can fit into the stock headlights without modification.

This is the magnetic controlled bulb as oppossed to the High (Halogen) / Low (Xenon) H4 bulbs which are plug and play.

IllusionX · 08-11-2009, 09:53 AM

yup it will fit. that what i am using, but mines are little different.

90tsi · 08-11-2009, 10:29 AM

yea mine look very similiar to that as well. i believe mine are the O-nex or D-nex brand.

bigsky2 · 08-11-2009, 03:56 PM

Thanks for confirming :)

bigsky2 · 08-12-2009, 03:36 AM

Hey guys,

For those of you that installed HID bulbs like the ones pictured, were you able to put the headlight boot back on?

bigsky2 · 08-12-2009, 05:58 AM

Thanks Camelll

I had a single beam H4 bulb in there before, and I removed the headlights completely so I had more room to work with.

I took out the boots and looped the wires and HID bulb through the boot before securing the bulb in place and putting the boot back on. It was quite painless and didn't require cutting or modifying of the boot.

The base of the H4 magnetic style bi-xenon bulbs looks bigger than the opening of the boot so cutting it or making the opening of the boot a bit larger might be necessary.

IllusionX · 08-12-2009, 10:17 AM

mine fits perfectly.

bigsky2 · 08-13-2009, 03:57 PM

Cool, thanks.

I tried to fit it and it works without cutting or modifying.

Should the base be inside or outside the boot?
The base of these magnetic bulbs move, so would it be better to have it outside the boot so it's not obstructed when the high beams are activated?

*Chris07LB* · 08-13-2009, 04:05 PM

Do a search for Violin. His high/low H4, before his full conversion, were just like that.
He had tons of info about the wiring an so fourth.

areithan1980 · 08-26-2009, 01:47 AM

Well just got one installed on my car too yesteday but i decided to remove the tin metal wrapped around the bulb (shield) it self it looked like a guard or something since i thoguht maybe it doenst need it since i already got one in my OEM headlight assy. I was worried too that it wouldnt fit once i start pushing it in into the housing together with the OEM shield. Now my light is kinda scattered all over the place thinking maybe i should have kept the tin piece(shield) i dunno.

areithan1980 · 08-26-2009, 04:36 PM

nvm i put it back on and it works so much better now

08-11-2009, 06:20 AM	#1
bigsky2 Cousin Vitz View User's Garage Drives: Yaris RS 5DR / Vitz RS wannabe Join Date: Mar 2006 Location: Vancouver, Canada Posts: 1,082	H4 HID Kit Bulbs in Stock Headlights I'm just trying to confirm if the following aftermarket H4 Hi/Lo HID bulbs can fit into the stock headlights without modification. This is the magnetic controlled bulb as oppossed to the High (Halogen) / Low (Xenon) H4 bulbs which are plug and play. __________________ 2007 Yaris RS Hatchback Black Sand Pearl 5DR MT DIY Speaker Spacer/Bracket Template for Yaris Hatchback http://www.yarisworld.com/forums/showthread.php?t=1930

08-11-2009, 03:56 PM	#4
bigsky2 Cousin Vitz View User's Garage Drives: Yaris RS 5DR / Vitz RS wannabe Join Date: Mar 2006 Location: Vancouver, Canada Posts: 1,082	Thanks for confirming :) __________________ 2007 Yaris RS Hatchback Black Sand Pearl 5DR MT DIY Speaker Spacer/Bracket Template for Yaris Hatchback http://www.yarisworld.com/forums/showthread.php?t=1930

08-12-2009, 03:36 AM	#5
bigsky2 Cousin Vitz View User's Garage Drives: Yaris RS 5DR / Vitz RS wannabe Join Date: Mar 2006 Location: Vancouver, Canada Posts: 1,082	Hey guys, For those of you that installed HID bulbs like the ones pictured, were you able to put the headlight boot back on? __________________ 2007 Yaris RS Hatchback Black Sand Pearl 5DR MT DIY Speaker Spacer/Bracket Template for Yaris Hatchback http://www.yarisworld.com/forums/showthread.php?t=1930

08-12-2009, 05:58 AM	#6
bigsky2 Cousin Vitz View User's Garage Drives: Yaris RS 5DR / Vitz RS wannabe Join Date: Mar 2006 Location: Vancouver, Canada Posts: 1,082	Thanks Camelll I had a single beam H4 bulb in there before, and I removed the headlights completely so I had more room to work with. I took out the boots and looped the wires and HID bulb through the boot before securing the bulb in place and putting the boot back on. It was quite painless and didn't require cutting or modifying of the boot. The base of the H4 magnetic style bi-xenon bulbs looks bigger than the opening of the boot so cutting it or making the opening of the boot a bit larger might be necessary. __________________ 2007 Yaris RS Hatchback Black Sand Pearl 5DR MT DIY Speaker Spacer/Bracket Template for Yaris Hatchback http://www.yarisworld.com/forums/showthread.php?t=1930

08-13-2009, 03:57 PM	#8
bigsky2 Cousin Vitz View User's Garage Drives: Yaris RS 5DR / Vitz RS wannabe Join Date: Mar 2006 Location: Vancouver, Canada Posts: 1,082	Cool, thanks. I tried to fit it and it works without cutting or modifying. Should the base be inside or outside the boot? The base of these magnetic bulbs move, so would it be better to have it outside the boot so it's not obstructed when the high beams are activated? __________________ 2007 Yaris RS Hatchback Black Sand Pearl 5DR MT DIY Speaker Spacer/Bracket Template for Yaris Hatchback http://www.yarisworld.com/forums/showthread.php?t=1930

08-11-2009, 09:53 AM	#2
IllusionX It's the illusion you see View User's Garage Drives: 07 Yaris Sedan Aero Join Date: Oct 2006 Location: Brossard, QC Posts: 3,888	yup it will fit. that what i am using, but mines are little different.

08-11-2009, 10:29 AM	#3
90tsi View User's Garage Drives: 09 yaris Join Date: Nov 2006 Location: missouri Posts: 555	yea mine look very similiar to that as well. i believe mine are the O-nex or D-nex brand.

08-12-2009, 10:17 AM	#7
IllusionX It's the illusion you see View User's Garage Drives: 07 Yaris Sedan Aero Join Date: Oct 2006 Location: Brossard, QC Posts: 3,888	mine fits perfectly.

08-13-2009, 04:05 PM	#9
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Do a search for Violin. His high/low H4, before his full conversion, were just like that. He had tons of info about the wiring an so fourth.

08-26-2009, 01:47 AM	#10
areithan1980 Drives: 2007 Yaris Hatchback Join Date: Jun 2009 Location: North Chicago IL 60064 Posts: 66	AGT Xenon HID Hi/Lo Well just got one installed on my car too yesteday but i decided to remove the tin metal wrapped around the bulb (shield) it self it looked like a guard or something since i thoguht maybe it doenst need it since i already got one in my OEM headlight assy. I was worried too that it wouldnt fit once i start pushing it in into the housing together with the OEM shield. Now my light is kinda scattered all over the place thinking maybe i should have kept the tin piece(shield) i dunno. Last edited by areithan1980; 08-26-2009 at 01:49 AM. Reason: corrected some spelling

08-26-2009, 04:36 PM	#11
areithan1980 Drives: 2007 Yaris Hatchback Join Date: Jun 2009 Location: North Chicago IL 60064 Posts: 66	nvm i put it back on and it works so much better now

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for a shop in Oregon to hook up HID light kit or whatever else you got???	wholenizz	Northwest	1	08-26-2009 02:53 AM
HID kit side-effect??	ozmdd	Cosmetic Modifications (Exterior/Interior)	3	04-18-2009 02:47 PM
My 6500k H4 HID Review [pics]	Chris07LB	Cosmetic Modifications (Exterior/Interior)	74	10-10-2006 07:19 PM
Side Turn Signal Lights	bigsky2	Cosmetic Modifications (Exterior/Interior)	15	08-24-2006 06:06 PM