|
07-18-2012, 01:13 PM | #1 |
Drives: MR2 Spyd/Type R/Yaris/Civic Si Join Date: Feb 2007
Location: Ottawa
Posts: 479
|
Current pics before further modding
Haven't taken pics in a while, but I needed some for a show I'm hoping to attend, so I thought I'd share them here.
Here is the car as of two weeks ago I'll be doing another photoshoot soon, because I've got a ton of stuff piling up (money has been flying out of my wallet :( ) Vitz badging rear wing centre console armrest TRD carbon fibre shiftknob Darkened (painted) headlight chrome (total PITA to do) UltraRacing front upper strut brace UltraRacing rear upper strut brace UltraRacing room bar (In another month) MicroImage shortshifter and shifter bracket MicroImage gas hood struts PenquinGarage 13mm rear axle spacers (not on in these pics) Simota Carbon Fibre Airbox NST lightweight crank pulley / waterpump pulley & alternator pulley Standard Suspension STD R1 coilovers 16x7 Konig Heliums with 195/50/16 Falken Ziex I have 15" (8.6lb) SSR Type C's being powdercoated as we speak, and they will soon replace the Konigs / along with 195/50/15 Yokohama S-drives Also have proper SSR centre caps / hub-centric rings Also In my garage waiting for install: -JDM power folding mirrors switch (still haven't tracked down the actual mirrors - I've begun to think it would be easier to find the second shooter from Dallas in 1963 than it would be to find JDM power folding mirrors) -Carbon Fibre mirror covers (waiting for install onto JDM mirrors - that are themselves impossible to find) -DC Sports ceramic coated header (waiting for install along with ARP header studs) -Intake Manifold Spacer waiting for Install -OBX header back exhaust (waiting for install) -UltraRacing mid under bar -OEM power windows / OEM power locks (waiting for install) -OEM cruise control (waiting for install) Its my daily driver but I try to keep it clean. Front 3/4 Rear 3/4 Cheers Will |
07-18-2012, 01:18 PM | #2 |
Drives: MR2 Spyd/Type R/Yaris/Civic Si Join Date: Feb 2007
Location: Ottawa
Posts: 479
|
|
07-18-2012, 02:09 PM | #3 |
Drives: red bare bone yaris hb 3dr Join Date: May 2009
Location: columbus
Posts: 1,022
|
Looking good Will
|
07-18-2012, 03:18 PM | #4 | |
#1 Lemming
Drives: Light Blue '08 Yaris Join Date: Mar 2010
Location: Milwaukee, WI
Posts: 760
|
Quote:
http://www.rhdjapan.com/toyota-oem-o...p9-scp90-63861
__________________
|
|
07-18-2012, 04:13 PM | #5 |
Drives: MR2 Spyd/Type R/Yaris/Civic Si Join Date: Feb 2007
Location: Ottawa
Posts: 479
|
|
07-18-2012, 04:15 PM | #6 |
Are this JDM power folding mirrors switch also available for the model "zsp90" (europe TS!) ???
Greez from germany Pj.
__________________
|
|
07-18-2012, 04:19 PM | #7 | |
Drives: MR2 Spyd/Type R/Yaris/Civic Si Join Date: Feb 2007
Location: Ottawa
Posts: 479
|
Quote:
Thanks for the link I'll take a pic of my switch tonight (its the OEM JDM switch) BTW, CTScott helped me with the part #'s we need for the Mirrors, but I haven't had luck finding any Here are the #'s 87940-52890 (left side mirror) 87910-52A10 (right side mirror Will |
|
07-18-2012, 04:20 PM | #8 |
Drives: MR2 Spyd/Type R/Yaris/Civic Si Join Date: Feb 2007
Location: Ottawa
Posts: 479
|
|
07-18-2012, 05:12 PM | #9 |
Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,761
|
The PGs are going to push those rears out nicely. Everything looks great until you see the current wheel tuck happening back there. You will have to add some negative camber tho.
__________________
|
07-18-2012, 05:25 PM | #10 | |
#1 Lemming
Drives: Light Blue '08 Yaris Join Date: Mar 2010
Location: Milwaukee, WI
Posts: 760
|
Quote:
__________________
|
|
07-18-2012, 05:28 PM | #11 |
Drives: '10 Yaris LB Polar White Join Date: Oct 2010
Location: Albuquerque
Posts: 248
|
Mes likes, good looking car.
|
07-19-2012, 10:53 PM | #12 |
Drives: MR2 Spyd/Type R/Yaris/Civic Si Join Date: Feb 2007
Location: Ottawa
Posts: 479
|
here is what the switch looks like (this one isn't mine)
|
07-20-2012, 01:20 AM | #13 |
Heart Up! Vitz
Drives: トヨタ Vitz Join Date: Jun 2007
Location: Fremont, CA
Posts: 2,582
|
i dig your darkened headlights :D
For that JDM auto folding switch, you need 2 pins with wires attached and tap them to the left and right wire/s of the auto folding mirrors. Not sure which one. Remember reading echo's older posts on MI forums though. P.S. the switch is the exact same size as the USDM one on our cars. Just 2 more pins need to be connected and tapped somewhere. Thats all i remember from past posts of the user who had them. |
07-20-2012, 09:13 AM | #14 | |
Drives: MR2 Spyd/Type R/Yaris/Civic Si Join Date: Feb 2007
Location: Ottawa
Posts: 479
|
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Electrical System Upgrade Advice | sqcomp | In Car Entertainment + Electronics (audio / video / alarm) | 6 | 03-23-2016 01:15 AM |
Ohm's Law and Setting Amp Gain | _S7V7N_ | In Car Entertainment + Electronics (audio / video / alarm) | 24 | 03-13-2012 09:34 PM |
Pics Pics Pics | Jahbs | Australia | 4 | 06-30-2010 12:06 PM |
HELLAFLUSH III pics | contraband831 | Photo-Video-Media Gallery | 37 | 01-10-2010 12:11 AM |
My Belta, all the way from Pakistan! *many pics/ "mods"* | drbilal | Photo-Video-Media Gallery | 38 | 05-23-2009 12:43 AM |