Yaris H.I.D. retrofit

[sam07yaris]

Actually, it's kinda difficult, BUT you have to know a little of fabricating when you open up the headlights. You have to TURN the oven to 290 degrees, wait 10 minutes. Get some Interior trim tools or prying tools. NO screwdriver Other wise you would warp the plastic. It needs a bigger flat end like a paint tool $1.99 at Sears. It's about 2 inchs in width and its sturdy. Then you need something in a 1 in or 1/2 inch width to help pry it open.

Get some CLAMPS. There are plastic clamps at sears so this ensures you that you get even pressure when you put it back together and no leaks will occur.


Get an ELECTRIC DREMEL tool. It's much more powerful than a battery operated.

Now just make a wiring harness

http://www.hidplanet.com/forums/viewtopic.php?t=6612

FIRST for beginners, Id rather have you practice on retroing on a junk yard headlights, no scratches. It's better to practice than ruin your investment thats $188 per yaris headlight. Ya know?

After dremeling the back end, you need to make some slight adjustments. The turn signal is a separate piece on the headlight, TRIM IT IF YOU ARE USING TSX PROJECTORS!!!!!!!!!!! Now all H.I.D. projectors come in different dimensions and sizes but for your best bet, buy valeo projectors or e55 projectors. They do not have fitment issues. I chose the TSX because it has a freaking WIDE WIDE beam and its clear lens *better clarity*

Go to Hidplanet.com/forums and study on how to mount projectors in a headlight. STUDY on it. I've been a member of this forum for about 3 years now, after I do my next retro on TL projectors, I will start other yaris owners as well.


P.S. Buy one projector online, and buy a yunk yard headlight, and practice FIRST. I dont' want to be pissed off seeing a screwed up alignment, lol