|
12-23-2020, 06:22 PM | #1 |
Drives: 07 yaris Join Date: Dec 2020
Location: Durham NC
Posts: 13
|
Help confirm C-One springs/shocks install?
Hey all,
I just installed C-One springs and shocks on my 07 yaris sedan. The install went fine, I think. But I'm a bit nervous that a) the springs seem fine on the lift with the car in the air (here), but once lowered seem quite compressed (here). b) the top mount plate/screw seems slightly raised (here). Unlike the stock shocks with the allen-key, the C-One shocks (KYB's apparently) have these plastic tips in the tops of the bolts (which are maybe used to adjust the stiffness? I need to check with C-One on this). I tightened the top nut as much as possible before the shaft started spinning. Is this okay? Or is there a way I need to hold the shaft while tightening the nut (there doesn't seem to be an alley-key hole like the stock shocks)? I'm pretty confident I installed the proper pieces, but perhaps I missed something? I took the car for a quick drive and it seems to drive fine. Help?? Thanks ya'll :) Last edited by sacklunchz; 12-23-2020 at 06:52 PM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Zage Turbo Kit Install - Toyota Yaris | Focus_Sh1ft | Forced Induction Forum | 160 | 02-06-2022 08:14 PM |
Compilation of Yaris How-tos/DIYs | YarisBueller | DIY / Maintenance / Service | 39 | 04-28-2018 08:47 AM |
))) Tein Super Compact coilover install tips ((( | aucorium | DIY / Maintenance / Service | 4 | 10-25-2011 12:42 AM |
Part #s for Fog Light install? Can anyone who works for Toyota confirm? | IsLNdbOi | Cosmetic Modifications (Exterior/Interior) | 73 | 12-23-2010 05:15 PM |
HELP needed for carputer project: Powered USB hub install | Astroman | In Car Entertainment + Electronics (audio / video / alarm) | 15 | 11-01-2010 05:18 PM |