Cp Pistons, Pauter rods , greddy, fidanza and other for 1NZ-FE!!! - Toyota Yaris Forums

Giupo · 08-21-2009, 02:27 PM

*set of 4 CP Piston compression ratio 9,0:1 with only 3000 miles price: $ 300
*set of a 4 Pauter Rods E4340 vacuum melt chrome moly forging – CNC machined only 3000 miles price: $700
* set of a 4 Injetctor 330cc Celica GTS only 3000 miles price : $100
* Cylinder Head polished and with regrinder camshafts for turbo only 3000 miles $600
* Greddy E-manage Ultimate with sensor pressure, cable and software price: $400
* Fidanza clutch 4.3 in ceramic 6 pads only 3000 miles price: $200
* Oil temp Gauge price: $15
* Boost Gauge in Bar price: $15
* Oil radiator with sandwich price: $70
* Fuel Pump 255 l/h only 3000miles price $70
* OBX Fuel Rail only 3000 miles price $60
* CamCon CC-111 Power Enterprise price: $280
* Final Ratio 3.722for C54/C56 Transmission only 3000 miles price : $200
* Fidanza Flywheel in alluminium only 3000 miles price: $200
* BCU+ Elettonic Boost Controller only 3000 miles price :$200
* Double pistons Blow Off Valve in ergal only 1000 miles price : $100
* Set of 4 NGK Iridium IX BKR7EIX new! price : $30
* Kit of a Energy Suspension Motor Mount made of HYPER-FLEX™ performance polyurethane only 500 miles price : $40

cali yaris · 08-21-2009, 03:25 PM

holy crap, that's awesome. You have a PM.

mikenacarato · 08-21-2009, 03:27 PM

dang..nice stuff!

cali yaris · 08-21-2009, 03:44 PM

LOL - I asked for pics too. SOMEONE needs to post them!

cali yaris · 08-21-2009, 03:45 PM

9.0:1 is a little low for the 1.5L IMO, difficult to make maximum power (but easier to tune)

Giupo · 08-21-2009, 04:15 PM

my car with greddy kits have 206 cv at 15 psi but the greddy turbo is little.. for the pics please Could your wait some days because I must open the engine and remove the parts.. I must remove the parts because in Italy is not in rule in city road and the Police have breake my car :( and I must install the oem engine for use in city road:..(

cali yaris · 08-21-2009, 04:25 PM

oh I'm sorry that happened and you have to put it back after so much work. No hurry, whenever you can take the pics, need to check for small cracks and wear patterns.

AdeJong 03 · 08-21-2009, 04:52 PM

Quote:

Originally Posted by Giupo

my car with greddy kits have 206 cv at 15 psi but the greddy turbo is little.. for the pics please Could your wait some days because I must open the engine and remove the parts.. I must remove the parts because in Italy is not in rule in city road and the Police have breake my car :( and I must install the oem engine for use in city road:..(

sounds like italy is the same as california

its a shame. nice stuff!

ChinoCharles · 08-24-2009, 04:41 PM

Dibs on the rods pending pictures.

You've got PM.

Max · 08-25-2009, 12:56 AM

Pics?

cali yaris · 08-25-2009, 03:10 AM

he has to tear down his motor and go back to stock, so I guess he'll take pics at that time. Be very careful about used pistons.

cali yaris · 08-25-2009, 02:57 PM

apparently there is a problem with one piston. I only buy matched sets, so I will pass on those.

08-21-2009, 02:27 PM	#1
Giupo Drives: Yaris Join Date: Apr 2009 Location: Italy Posts: 77	Cp Pistons, Pauter rods , greddy, fidanza and other for 1NZ-FE!!! set of 4 CP Piston* compression ratio 9,0:1 with only 3000 miles price: $ 300 set of a 4 Pauter Rods* E4340 vacuum melt chrome moly forging – CNC machined only 3000 miles price: $700 * set of a 4 Injetctor 330cc Celica GTS only 3000 miles price : $100 * Cylinder Head polished and with regrinder camshafts for turbo only 3000 miles $600 * Greddy E-manage Ultimate with sensor pressure, cable and software price: $400 * Fidanza clutch 4.3 in ceramic 6 pads only 3000 miles price: $200 * Oil temp Gauge price: $15 * Boost Gauge in Bar price: $15 * Oil radiator with sandwich price: $70 * Fuel Pump 255 l/h only 3000miles price $70 * *OBX Fuel Rail* only 3000 miles price $60 * CamCon CC-111 Power Enterprise price: $280 * Final Ratio 3.722for C54/C56 Transmission only 3000 miles price : $200 * Fidanza Flywheel in alluminium only 3000 miles price: $200 * BCU+ Elettonic Boost Controller only 3000 miles price :$200 * Double pistons Blow Off Valve in ergal only 1000 miles price : $100 * Set of 4 NGK Iridium IX BKR7EIX new! price : $30 * Kit of a Energy Suspension Motor Mount made of HYPER-FLEX™ performance polyurethane only 500 miles price : $40 Last edited by Giupo; 08-22-2009 at 09:01 AM.

08-21-2009, 03:25 PM	#2
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	holy crap, that's awesome. You have a PM. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-21-2009, 03:44 PM	#4
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	LOL - I asked for pics too. SOMEONE needs to post them! __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-21-2009, 03:45 PM	#5
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	9.0:1 is a little low for the 1.5L IMO, difficult to make maximum power (but easier to tune) __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-21-2009, 04:25 PM	#7
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	oh I'm sorry that happened and you have to put it back after so much work. No hurry, whenever you can take the pics, need to check for small cracks and wear patterns. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-21-2009, 03:27 PM	#3
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	dang..nice stuff!

08-21-2009, 04:15 PM	#6
Giupo Drives: Yaris Join Date: Apr 2009 Location: Italy Posts: 77	my car with greddy kits have 206 cv at 15 psi but the greddy turbo is little.. for the pics please Could your wait some days because I must open the engine and remove the parts.. I must remove the parts because in Italy is not in rule in city road and the Police have breake my car :( and I must install the oem engine for use in city road:..(

08-24-2009, 04:41 PM	#9
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Dibs on the rods pending pictures. You've got PM.

08-25-2009, 12:56 AM	#10
Max Drives: Yaris 2000 Join Date: Oct 2006 Location: Costa Rica Posts: 3	Pics? __________________ Orgullosamente TICO! 2005 Vitz RS-T

08-25-2009, 03:10 AM	#11
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	he has to tear down his motor and go back to stock, so I guess he'll take pics at that time. Be very careful about used pistons. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-25-2009, 02:57 PM	#12
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	apparently there is a problem with one piston. I only buy matched sets, so I will pass on those. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.