|
05-17-2009, 09:13 PM | #1 |
37HSSV
|
Turbo Manifold thread
Ok, heres my situation.
I am starting to put together a turbo kit for the Yaris, most of it will end up just being bits and ends here and there. Number one thing in mind is keeping costs below $2500 for an Intercooled setup. My goals: Cost at or just above $2500 No engine management 6PSI Intercooled Power goal: 160whp Should be obtainable reasonably. Step 1 was finding a turbo manifold for the car, so I started rooting around and found 2 options. Turbotoyotas.com manifold, then this sucker. http://cgi.ebay.com/ebaymotors/03-06...Q5fAccessories Its a cast iron piece, set for a T25/GT28 Turbo. OEM fitment. Only issue, its a Scion Xb/Xa Manifold. Pics: Any suggestions?
__________________
07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance. |
05-17-2009, 09:17 PM | #2 |
Drives: 07 Blazing Blue LB Join Date: Jun 2007
Location: Honolulu, Hawaii
Posts: 692
|
You get what you pay for! lol
__________________
Most Satisfying Crew Serious Business... MunkyWurks Garage - 8088488794 |
05-17-2009, 09:18 PM | #3 |
37HSSV
|
Well I know that, just wondering if a cast iron part is better off than a welded one.
lol, just as a warning, Tamago is gonna have a field day with your statement if he finds it.
__________________
07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance. Last edited by Sabretooth; 05-17-2009 at 09:29 PM. |
05-17-2009, 10:45 PM | #4 |
Drives: Yaris LB Turbo Join Date: Aug 2006
Location: Miami FL
Posts: 782
|
That manifold will bolt right up. The problem MIGHT be the position & angle of the turbo. I think it will be to much towards the drivers side & the angle is to much towards the firewall. Only way to see if it will work is to but it & buy the turbo you are going to use & test fit it.
|
05-17-2009, 10:57 PM | #5 |
37HSSV
|
I might just buy it anyway...
Only way someone will know is to test it.
__________________
07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance. |
05-18-2009, 12:26 AM | #6 |
Drives: 2005 Toyota Echo Join Date: Oct 2008
Location: Ottawa, Ontario
Posts: 177
|
http://www.turbinetech.ca/produit_de...ac096c&lang=AN
You can ask about fitting it on the yaris... but this will also bolt up and its equal length...
__________________
Project Slowtop - Twin Engine 4AGE Blacktop Vitz - Twin Turbo - 503hp 1987 Nissan Maxima - 40,000 original miles - Slammed 1991 Isuzu Impulse RS AWD Turbo - approx 250hp - Winter Beater 1989 Isuzu Imark RS - Mint Condition - 0 rust - 100% factory :) - Summer Cruiser - 100% restored 1986 VW Jetta Wolfsburg - 120,000km - Mint condition. TDI swap in progress |
05-18-2009, 12:58 AM | #7 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Remember how you had to remove your power steering to make room for that?
We have electronic p/s on our cars, so I think Jess' mani would fit just fine. Overkill for 6 psi though.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
05-18-2009, 02:21 AM | #8 | |
Drives: 07 Blazing Blue LB Join Date: Jun 2007
Location: Honolulu, Hawaii
Posts: 692
|
Quote:
i know that guy is always on my ass.
__________________
Most Satisfying Crew Serious Business... MunkyWurks Garage - 8088488794 |
|
05-18-2009, 05:35 AM | #9 |
cast is better then welded can stand up to the heat but welded you can atleast reposition the angle. and the cast supposedly flows worse cause stay all ruff and whatevers inside not as clean as welded
__________________
08 junction produce belta almost done and ready for paint 06 junction produce tc 604 bhp 445tq ddriven still trying for 700+hp 90 crx sir ls vtec turbo 755 hp mecp masters certified |
|
05-18-2009, 09:28 AM | #10 | |
Drives: Yaris LB Turbo Join Date: Aug 2006
Location: Miami FL
Posts: 782
|
Quote:
|
|
05-18-2009, 10:20 AM | #11 | |
Start another Oil Thread!
|
__________________
Quote:
|
|
05-18-2009, 11:28 AM | #12 | |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Quote:
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. Last edited by cali yaris; 05-18-2009 at 11:53 AM. |
|
05-18-2009, 11:49 AM | #13 | |
Start another Oil Thread!
|
still don't understand why you'd do that...... delete something that doesn't need to be deleted..
__________________
Quote:
|
|
05-18-2009, 11:53 AM | #14 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
^ You've made that opinion clear before. If you ever ask a question instead, I'd be happy to answer it.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
05-18-2009, 11:57 AM | #15 |
Drives: Yaris LB Turbo Join Date: Aug 2006
Location: Miami FL
Posts: 782
|
|
05-18-2009, 11:58 AM | #16 | |
Start another Oil Thread!
|
why?
__________________
Quote:
|
|
05-18-2009, 12:15 PM | #17 |
Drives: 07 Blazing Blue LB Join Date: Jun 2007
Location: Honolulu, Hawaii
Posts: 692
|
lol you dont have to comment on everything i say though. maybe like once in a while ignore me? lol
Thsat turbine tech one looks like its going up? i dunno lol
__________________
Most Satisfying Crew Serious Business... MunkyWurks Garage - 8088488794 |
05-18-2009, 02:13 PM | #18 | |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Quote:
2. I'm saving 18 pounds of weight and clearing out the engine bay. 3. I'm trying to squeeze every horsepower I can out of this motor, and however small, this will make a difference. (yes, I know there are a lot more things I can do in this regard) 4. This gets the condenser out of the way of the radiator, easier to fab/install a custom radiator later. 5. I'm also converting the water pump to electric, so I want to see what the car is like with just two pulleys. 6. A panda on the hood is not "needed" either, but it's what you like -- this is what I like.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Chino's Turbo Thread | ChinoCharles | Forced Induction Forum | 299 | 03-17-2017 08:01 AM |
GI: Turbo Manifold | ChinoCharles | Forced Induction Forum | 4 | 04-13-2009 01:42 AM |
xa/xb Turbo manifold for Custom set up | CASTREX | Forced Induction Forum | 1 | 01-21-2009 02:43 PM |
Why industries turbo manifold? | anonymous user | Forced Induction Forum | 33 | 12-07-2008 01:11 PM |
turbo manifold build... | joey1320 | Forced Induction Forum | 4 | 06-30-2007 02:26 PM |