FS: OEM Cruise Control Stalk with Wire and Screws - Page 4 - Toyota Yaris Forums

CTScott · 12-02-2011, 07:33 AM

Quote:

Originally Posted by SimTronik

Perfect thanks! Any tips what to avoid with the airbag?

Just make sure that you disconnect the negative battery terminal and wait a couple of minutes before disconnecting the airbag, and when you remove it, set it down on its frame, rather than on the Toyota logo.

SimTronik · 12-03-2011, 05:34 PM

Everything is plugged in and back on its place but i cant remove the steering colum cover. i think its because the wheel is in place? So i cant check for the d3 pins. Can i just road test it lol? or it is risky?

CTScott · 12-03-2011, 05:43 PM

You can just road test it, or better yet, turn the ignition to ON, press the on/off on the stalk, and see if the indicator comes on.

SimTronik · 12-03-2011, 06:03 PM

It works! Can beleive i have a cruise control for 40 bucks :) Thanks sir.

33OH · 12-09-2011, 01:00 PM

Scott, can you PM me what all I'd need to run this on my 2008 Yaris LB 5 speed? Interested but not sure if the wiring would be over my head.

CTScott · 12-09-2011, 01:05 PM

Quote:

Originally Posted by 33OH

Scott, can you PM me what all I'd need to run this on my 2008 Yaris LB 5 speed? Interested but not sure if the wiring would be over my head.

You can definitely handle it. With my DIY many who have never touched any wires in a car have self installed it.

http://www.yarisworld.com/forums/showthread.php?t=33750

A-Dingo-Ate-My-Baby · 12-09-2011, 01:23 PM

protip

for the two screws, you can use 2 standard server rack mount screws
found in most computer rooms or racks....
they are typically the same size and thread pitch, and short enough as well

that is what I used on my cruise control after digging through my junk drawer

deathwisher · 12-09-2011, 09:26 PM

Quote:

Originally Posted by A-Dingo-Ate-My-Baby

protip

for the two screws, you can use 2 standard server rack mount screws
found in most computer rooms or racks....
they are typically the same size and thread pitch, and short enough as well

that is what I used on my cruise control after digging through my junk drawer

That depends on if you are in Canada or US... >.> Canada's server rack uses #10-32 screws. I can't remember which one the US ones used...

GAAzureMach1 · 12-14-2011, 12:22 AM

Hey Scott, I have a 2010 HB 3dr L Automatic with the convenience package. Can you pm me with cost and payment info?

Thanks, Todd

YAR1S · 12-15-2011, 02:20 AM

soooo are these plug and play for 2007 liftback? *crosses fingers*

CTScott · 12-15-2011, 06:54 AM

Quote:

Originally Posted by YAR1S

soooo are these plug and play for 2007 liftback? *crosses fingers*

Yes. There is a little bit of wiring that needs to be added for 06-08 Yaris, but it is just a matter of adding a couple of pins to two connectors and running the wire from the ECM to the steering column. Take a look at my DIY to see exactly what's involved:

http://www.yarisworld.com/forums/showthread.php?t=33750

thestranger · 12-25-2011, 12:26 PM

hey Scott, I know I'm like a year late... got an '09 lb/mt. any more stalks for sale? :)

CTScott · 12-25-2011, 09:05 PM

Quote:

Originally Posted by thestranger

hey Scott, I know I'm like a year late... got an '09 lb/mt. any more stalks for sale? :)

Yes. I still have plenty.

GAAzureMach1 · 12-31-2011, 08:06 AM

money sent.

GAAzureMach1 · 01-06-2012, 08:49 PM

Scott I got it in the mail today. Took me 20 mins for the whole install. Easiest mod I have ever done. Thanks a bunch!

ttr125fan09 · 01-22-2012, 01:06 PM

if you have any left for sale, i would be interested

CTScott · 01-22-2012, 01:37 PM

Quote:

Originally Posted by ttr125fan09

if you have any left for sale, i would be interested

I do still have some.

Herder · 10-25-2012, 03:09 PM

CTScott, you still have any stalks? I have a 10' LB Auto no power package

12-03-2011, 05:43 PM	#3
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	You can just road test it, or better yet, turn the ignition to ON, press the on/off on the stalk, and see if the indicator comes on. __________________

12-14-2011, 12:22 AM	#9
GAAzureMach1 Converted Gearhead Drives: 2010 Yaris HB 3 Door Base Red Join Date: Nov 2011 Location: Greenville, GA Posts: 6	Hey Scott, I have a 2010 HB 3dr L Automatic with the convenience package. Can you pm me with cost and payment info? Thanks, Todd __________________ Commuter -10 Toyota Yaris, HB, 3 Dr, Base, auto, Red Track Queen -03 Ford Mach1, 1UP, 4.6 DOHC V-8, TR-3650 5 spd Man, Azure Blue, Highly Modded Grocery Getter -02 Ford Excursion, Ltd, 6.8 SOHC V-10, 4R100 Slush Box, Forest Green, Few interior mods Tow Pig - 94 Ford F350, XLT, 4 Dr, Crew Cab, 2wd, 7.3 idi diesel, E40OD Slush Box, Bright Red, Mildly Modded

12-25-2011, 12:26 PM	#12
thestranger Drives: 09 3-door LB/MT Join Date: Nov 2011 Location: Colorado Springs, CO Posts: 5	hey Scott, I know I'm like a year late... got an '09 lb/mt. any more stalks for sale? :) Last edited by thestranger; 12-25-2011 at 01:15 PM.

12-31-2011, 08:06 AM	#14
GAAzureMach1 Converted Gearhead Drives: 2010 Yaris HB 3 Door Base Red Join Date: Nov 2011 Location: Greenville, GA Posts: 6	money sent. __________________ Commuter -10 Toyota Yaris, HB, 3 Dr, Base, auto, Red Track Queen -03 Ford Mach1, 1UP, 4.6 DOHC V-8, TR-3650 5 spd Man, Azure Blue, Highly Modded Grocery Getter -02 Ford Excursion, Ltd, 6.8 SOHC V-10, 4R100 Slush Box, Forest Green, Few interior mods Tow Pig - 94 Ford F350, XLT, 4 Dr, Crew Cab, 2wd, 7.3 idi diesel, E40OD Slush Box, Bright Red, Mildly Modded

01-06-2012, 08:49 PM	#15
GAAzureMach1 Converted Gearhead Drives: 2010 Yaris HB 3 Door Base Red Join Date: Nov 2011 Location: Greenville, GA Posts: 6	Scott I got it in the mail today. Took me 20 mins for the whole install. Easiest mod I have ever done. Thanks a bunch! __________________ Commuter -10 Toyota Yaris, HB, 3 Dr, Base, auto, Red Track Queen -03 Ford Mach1, 1UP, 4.6 DOHC V-8, TR-3650 5 spd Man, Azure Blue, Highly Modded Grocery Getter -02 Ford Excursion, Ltd, 6.8 SOHC V-10, 4R100 Slush Box, Forest Green, Few interior mods Tow Pig - 94 Ford F350, XLT, 4 Dr, Crew Cab, 2wd, 7.3 idi diesel, E40OD Slush Box, Bright Red, Mildly Modded

12-03-2011, 05:34 PM	#2
SimTronik Machinist View User's Garage Drives: Yaris sedan 2010 Join Date: Sep 2010 Location: Sts-Anges, Quebec, canada Posts: 198	Everything is plugged in and back on its place but i cant remove the steering colum cover. i think its because the wheel is in place? So i cant check for the d3 pins. Can i just road test it lol? or it is risky?

12-03-2011, 06:03 PM	#4
SimTronik Machinist View User's Garage Drives: Yaris sedan 2010 Join Date: Sep 2010 Location: Sts-Anges, Quebec, canada Posts: 198	It works! Can beleive i have a cruise control for 40 bucks :) Thanks sir.

12-09-2011, 01:00 PM	#5
33OH Drives: '08 Yaris Join Date: Oct 2008 Location: Dover, Ohio Posts: 7,606	Scott, can you PM me what all I'd need to run this on my 2008 Yaris LB 5 speed? Interested but not sure if the wiring would be over my head.

12-09-2011, 01:23 PM	#7
A-Dingo-Ate-My-Baby Banned Drives: yaris Join Date: Jan 2011 Location: earth Posts: 364	protip for the two screws, you can use 2 standard server rack mount screws found in most computer rooms or racks.... they are typically the same size and thread pitch, and short enough as well that is what I used on my cruise control after digging through my junk drawer

01-22-2012, 01:06 PM	#16
ttr125fan09 View User's Garage Drives: yaris Join Date: May 2011 Location: corpus christi, texas Posts: 133	if you have any left for sale, i would be interested

10-25-2012, 03:09 PM	#18
Herder Greenie Drives: 2010 Yaris Liftback 3dr Join Date: Oct 2012 Location: Bay City, MI Posts: 1	CTScott, you still have any stalks? I have a 10' LB Auto no power package

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cruise control install 2009 Yaris 3 door	PeteZNY	DIY / Maintenance / Service	125	03-31-2024 09:22 AM
DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag	CTScott	DIY / Maintenance / Service	307	04-04-2023 03:43 AM
DIY Cruise Control FAQ (2006-2010 Yaris)	CTScott	DIY / Maintenance / Service	467	10-18-2022 10:20 AM
Can we do this? (aka The DIY Cruise Control Thread)	mrbond	DIY / Maintenance / Service	502	07-22-2017 02:57 PM
This is pretty frikken stupid - Yaris '07 LB auto cruise control	firemachine69	DIY / Maintenance / Service	10	07-20-2010 08:09 AM