 |
 |
|
|
04-19-2011, 12:32 AM
|
#1 |
 Drives: 2006 Yaris CE 2-Door Hatchback Join Date: Mar 2011
Location: Toronto, Ontario, Canada
Posts: 19
|
DIY front control arms
Does anyone have a good DIY for the front control arms or replacing just the bushings? I just picked up a high mileage Yaris and it needs the control arm bushings to pass the safety check. I was thinking of ordering from ebay (90 bucks a pop for the control arms)
Last edited by special_k_828; 04-19-2011 at 01:08 AM. |
|
|
|
04-19-2011, 10:15 AM
|
#2 |
|
Drives: 2010 5 Door Join Date: Jan 2011
Location: Wisconsin
Posts: 92
|
Do you have a press to press out the bushings? Bushing replacement is a "standard" maintenance item wo probably no one will have a DIY. Are the control arms bent? You probably don't need new ones.
|
|
|
|
|
04-19-2011, 10:31 PM
|
#3 |
|
Drives: 2006 Yaris CE 2-Door Hatchback Join Date: Mar 2011
Location: Toronto, Ontario, Canada
Posts: 19
|
No, but at 225k kms on the car, I figure just to swap the whole arm out. Anybody with DIY instructions?
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Warning - Broken control arm bolt! | CB900F2 | DIY / Maintenance / Service | 460 | 08-23-2020 05:54 PM |
| DIY Change Your Interior Light Grey Panels to Black | KCALB SIRAY | DIY / Maintenance / Service | 64 | 01-22-2015 01:25 PM |
| DIY: Strut Tower Brace Bar | redyaris | DIY / Maintenance / Service | 18 | 03-16-2014 06:52 PM |
| DIY: LED side mirror installation | eTiMaGo | DIY / Maintenance / Service | 85 | 06-24-2011 11:48 AM |
| DIY Front Lip Options? | heeroyuy01195 | Cosmetic Modifications (Exterior/Interior) | 0 | 12-05-2010 12:55 AM |
Linear Mode
