|
05-24-2010, 04:31 PM | #19 |
|
|
05-24-2010, 05:26 PM | #20 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
89661-52F11 89661-52F11 89661-52G30 89661-52G50 89661-52G50 89661-52G51 89661-52F01 89661-52G40 89661-52G40 89661-52G30 89661-52G41 89661-52E90 89661-52E91 89661-52J50 89661-52J40 89661-52J30 |
|
06-12-2010, 01:48 AM | #21 |
|
|
07-06-2010, 01:21 PM | #22 |
Top Notch!
|
Who has done this on an 08 USDM Liftback and it worked?
__________________
Blah, Blah, Blah, Blah |
07-21-2010, 07:06 AM | #23 |
I've made a post!
Drives: 2010 Yaris Join Date: Jul 2010
Location: Hsinchu City, Taiwan
Posts: 1
|
I wodner if I can do the same trick on my Taiwanese version of 2010 Yaris Hatch Back because I heard its ECM has built-in cruise control function, but got locked. Some people charge US$250 for hacking the ECM and enable the CC function... Not sure if it's really locked or not... Is there anyway I can do to identify the CC function of my Yaris?
|
07-21-2010, 08:38 AM | #24 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
|
|
07-21-2010, 08:53 AM | #25 |
Drives: Silver 2007 3Dr - Gryph Join Date: Jul 2007
Location: Kansas City, MO, USA
Posts: 310
|
Did it on my 5-speed '07 USDM Liftback, had to run the wire to/from pin 40 on the ECM, swiped the other parts from a 5-speed '09 USDM Liftback and everything worked 'out of the box' without issue.
I ran the wire for pin 40 inside the dash along the existing cable harness across to the cabin air filter tray, the elbow joint above that is a flexible coupling gasket-ed on both sides without any locking tabs so I just ran the wire through the cabin fresh-air intake. It has some flanges on the sides in the engine bay for water drainage/catching that I routed the wire out of and over to the ECU. Take off both windshield wipers and the trim bezels all the way across.
__________________
|
07-26-2010, 11:47 PM | #26 |
Drives: 08 liftback 5 speed Join Date: Jul 2009
Location: georgia
Posts: 20
|
Saggio- I put the two-switch DIY type on my '08 LB. I ran the wires from the clutch switch and ECM in through the AC drain grommet. I superglued a roller switch from Radio Shack onto the metal bracket beside the clutch pedal for use as a clutch switch. Everything works fine.
|
08-09-2010, 02:03 AM | #27 |
Drives: 07 Yaris LB Join Date: Aug 2007
Location: Fort Lauderdale
Posts: 179
|
I did on mine the 2 Button and works perfectly, I bought the resistors and switches from radio shack and the OEM clutch switch. This is one of the est mods it also gives a nice touch of comfort to the yaris, Thank to CtScott that made this possible here are some pics |
08-09-2010, 05:03 PM | #28 |
Drives: 2009 Meteorite Metallic LB MT Join Date: Oct 2008
Location: Southeast Wisconsin
Posts: 810
|
Nice clean install ^
|
08-10-2010, 02:18 AM | #29 |
Drives: 07 Yaris LB Join Date: Aug 2007
Location: Fort Lauderdale
Posts: 179
|
Thanks Revsson!
I try to keep it clean as possible especially for the warranty, you never know!!! |
10-13-2010, 09:15 PM | #30 |
Drives: Blue,Sedan Join Date: Sep 2010
Location: Aguadilla,Puerto Rico
Posts: 42
|
Hi, to everybody, In from Puerto Rico, Im glad that I found this great forum, full of great and interesting info about Yaris. I recently bought a used 2009 Toyota Yaris Sedan, and Im doing some great mods that I have found here in the forum, after reading for a while I decided to do the DIY Cruise Control mod on my sedan, it have oem power locks and power windows, all the wiring is in place, and the cluster have the CC symbols, I installed the oem stalk and wire, but when I tried to turn the Cruise control on, nothings happens. I swapped the stalk with the one in my wifes rav-4 and it didnt worked also, but the one I bought worked in the Rav-4, so the problem is not the stalk, or the wire. Is there any optional procedure or relay that I need to install?
Thanks in advance for your help, looking forward to see my Yaris with cruise. |
10-13-2010, 09:48 PM | #31 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
|
|
10-13-2010, 09:55 PM | #32 |
Drives: Blue,Sedan Join Date: Sep 2010
Location: Aguadilla,Puerto Rico
Posts: 42
|
It have an Auto transmission.
|
10-13-2010, 09:59 PM | #33 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
|
10-13-2010, 10:09 PM | #34 |
Drives: Blue,Sedan Join Date: Sep 2010
Location: Aguadilla,Puerto Rico
Posts: 42
|
Yes just double checked and it have the 3 wires in place.
|
10-13-2010, 10:21 PM | #35 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
OK - Just to triple check - We're talking about the connector next to the yellow one on the left side of this picture?
If that's good, look at the part number on the ECM (The silver box on the passenger side of the firewall) and post it. I don't know if anyone from PR has tried the cruise mod, and I think that you might get a different version of the ECM, from what we get here. |
10-13-2010, 10:32 PM | #36 |
Drives: Blue,Sedan Join Date: Sep 2010
Location: Aguadilla,Puerto Rico
Posts: 42
|
Yes that is good, mine is exactly as the picture you posted, where exactly is this part, (The silver box on the passenger side of the firewall)?
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 08:50 AM |
Cruise Control | chessclubloser | DIY / Maintenance / Service | 11 | 03-27-2010 12:59 PM |
2007 Yaris Pricing Info ! | YarisBueller | New YARIS Purchase Forum | 104 | 06-24-2009 05:54 PM |
Using Cruise control | Driver | General Yaris / Vitz Discussion | 14 | 11-09-2006 11:12 PM |