Ebay Intake? - Toyota Yaris Forums

Split · 11-04-2008, 07:52 PM

http://cgi.ebay.com/ebaymotors/2007-...mZ110307719026

Right now i have a Simota CAI that's converted to an SRI since the CAI doesn't really fit the Sedan too well. I was hoping to buy a new intake and sell this one to a hatchback owner. Has anyone tried this ebay intake?

mikenacarato · 11-04-2008, 08:02 PM

IMO simota quality is waaaay better than this one. i would stick with quality.

Stargate YARlantIS · 11-04-2008, 08:03 PM

I got my Fujita F5 on ebay....it's more, idk... I'm happy, I saw this one when I was shoppin for mine. IDK why, but I went w/ the Fujita... I also cruised you tube w/ keywords Yaris + Intake... That's how I chose... I liked the sound of the Fujita best...

mikenacarato · 11-04-2008, 08:11 PM

also a majority of fujita intakes actually make the most power of other intake brands as well.

eii · 11-04-2008, 08:36 PM

My friend had an intake from ebay on his accord. It broke after a while. I've have the simota one in my sedan with the extra tubing for CAI. Its a tight fit I know, but I havent had any problems with it and I've had it installed for months now. Though a lot believe that CAI doesnt do much for the yaris anyways so setting the Simota as SRI is just fine.

Split · 11-04-2008, 10:26 PM

i guess i'll try to fit the rest of the CAI in there. Is this ebay intake a Cold Air intake? I'd rather stick to a short-ram intake instead of a cold air since I don't want to deal with a filter getting dirty down low.
I imagine all the intakes sound the same anyway.. i really doubt anyone could hear the difference between a Fujita vs an AEM etc.

Split · 11-04-2008, 10:32 PM

OT: can i clean my MAF with rubbing alcohol?

Midon · 11-04-2008, 11:28 PM

I got the intake pictured there and I must say for the price to be as low as it is it has some nice workmanship in it. Now I'm not sure what type of HP gain this gave me, but I know it's better then stock. For quality The welds are nice and it is a solid piece, I don't expect to have any problems. I also can't see paying 200 bucks when something for 50 does the same job. I know most people try to stick with name brands, for the name.But I don't have that kind of cash.

My .02

mikenacarato · 11-04-2008, 11:37 PM

you will never see the same performance gains out of an ebay intake vs. a good quality intake....never.

Split · 11-05-2008, 01:59 AM

well considering the brand name intakes don't give more than 1hp gain in reality anyway, i don't think it really matters.

mikenacarato · 11-05-2008, 07:45 AM

look at fujita. dyno proven at more than 1hp

Split · 11-05-2008, 10:41 AM

^ by who? fujita? we're not running big displacement or forced induction motors here..

mikenacarato · 11-05-2008, 10:49 AM

so...does that mean because i have a small car i cant make more than 1 hp with an intake? not to offend...i take more pride in my car than ebay parts...always have...always will. to each his own though.

ChinoCharles · 11-05-2008, 01:58 PM

I have heard and seen the Fujita intake on a sedan and it looked and sounded wonderful.

Don't buy this Ebay thing. It is garbage.

Split · 11-05-2008, 04:32 PM

how do you know the ebay intake is garbage? have you ever owned one? Seem to me Midon is the one in this thread that has every used one, and he says its good.

mikenacarato · 11-05-2008, 04:47 PM

i have owned some and every time i was dissapointed, they start to rust after a while filters are crap, their silicon hoses if applicable suck, they are all the same. you dont see track cars built with ebay parts do you? like i said before to each his own, but an ebay part is not considered a mod to me, more like "hey i was too lazy to save and get the good part" excuse.

kustom play · 11-05-2008, 07:04 PM

i have an ebay one and for the last year have had zero problems

maybe some of you are just getting into cars now, but back in the day when you wanted a CAI or ram intake you had to build it yourself

PHXDEMON · 11-05-2008, 07:23 PM

Don't throw crappy parts on your car.

11-04-2008, 07:52 PM	#1
Split Drives: 2008 Yaris Sedan Join Date: Oct 2008 Location: Edmonton Posts: 393	Ebay Intake? http://cgi.ebay.com/ebaymotors/2007-...mZ110307719026 Right now i have a Simota CAI that's converted to an SRI since the CAI doesn't really fit the Sedan too well. I was hoping to buy a new intake and sell this one to a hatchback owner. Has anyone tried this ebay intake?

11-04-2008, 08:03 PM	#3
Stargate YARlantIS View User's Garage Drives: 2007 Yaris Liftback Join Date: Oct 2008 Location: Saint Petersburg, FL Posts: 351	I got my Fujita F5 on ebay....it's more, idk... I'm happy, I saw this one when I was shoppin for mine. IDK why, but I went w/ the Fujita... I also cruised you tube w/ keywords Yaris + Intake... That's how I chose... I liked the sound of the Fujita best... __________________ Visualize whirled peas. Peace, Love and Good Smoke! --Tommy Chong

11-04-2008, 08:36 PM	#5
eii Rides canyon walls Drives: 1988 RX7 FC 10th AE Join Date: Jun 2007 Location: Long Beach, CA Posts: 503	My friend had an intake from ebay on his accord. It broke after a while. I've have the simota one in my sedan with the extra tubing for CAI. Its a tight fit I know, but I havent had any problems with it and I've had it installed for months now. Though a lot believe that CAI doesnt do much for the yaris anyways so setting the Simota as SRI is just fine. __________________ OEM Style Wing Spoiler \| TRD Axle-Back Exhaust \| Megan Lowering Springs (1.5 f/r) \| Simota Carbon Charger Intake \| Python 871XP Alarm System \| Aluminum Sports Pedal \| 17x7 +42mm Enkei J10 Black w/ Silver Lip \| 205/40 Falken Ziex-912 \| NST Lite Crank Pulley Red \| 1ZZ-FE Throttle Body \| AMK Racing Header

11-04-2008, 11:28 PM	#8
Midon Mod Freak Drives: 88 MR2 GT Join Date: Oct 2008 Location: Gainesville, TX Posts: 147	I got the intake pictured there and I must say for the price to be as low as it is it has some nice workmanship in it. Now I'm not sure what type of HP gain this gave me, but I know it's better then stock. For quality The welds are nice and it is a solid piece, I don't expect to have any problems. I also can't see paying 200 bucks when something for 50 does the same job. I know most people try to stick with name brands, for the name.But I don't have that kind of cash. My .02 __________________ http://www.cardomain.com/ride/3160999

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Intake Installation	redyaris	DIY / Maintenance / Service	53	08-23-2014 05:34 AM
EBay: Yaris Intake Manifold	ChinoCharles	Performance Modifications	21	10-22-2008 04:35 PM
Intake Systems Decision Maker..	Blenjar	Performance Modifications	25	09-15-2007 10:07 PM
WR Secret Weapon Intake Dyno Tested..	WRLEO	Performance Modifications	70	05-17-2007 03:00 PM
Cold Air Intake vs. Short Ram Intake	nevermorez	Performance Modifications	1	01-24-2007 04:25 PM

11-04-2008, 08:02 PM	#2
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	IMO simota quality is waaaay better than this one. i would stick with quality.

11-04-2008, 08:11 PM	#4
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	also a majority of fujita intakes actually make the most power of other intake brands as well.

11-04-2008, 10:26 PM	#6
Split Drives: 2008 Yaris Sedan Join Date: Oct 2008 Location: Edmonton Posts: 393	i guess i'll try to fit the rest of the CAI in there. Is this ebay intake a Cold Air intake? I'd rather stick to a short-ram intake instead of a cold air since I don't want to deal with a filter getting dirty down low. I imagine all the intakes sound the same anyway.. i really doubt anyone could hear the difference between a Fujita vs an AEM etc.

11-04-2008, 10:32 PM	#7
Split Drives: 2008 Yaris Sedan Join Date: Oct 2008 Location: Edmonton Posts: 393	OT: can i clean my MAF with rubbing alcohol?

11-04-2008, 11:37 PM	#9
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	you will never see the same performance gains out of an ebay intake vs. a good quality intake....never.

11-05-2008, 01:59 AM	#10
Split Drives: 2008 Yaris Sedan Join Date: Oct 2008 Location: Edmonton Posts: 393	well considering the brand name intakes don't give more than 1hp gain in reality anyway, i don't think it really matters.

11-05-2008, 07:45 AM	#11
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	look at fujita. dyno proven at more than 1hp

11-05-2008, 10:41 AM	#12
Split Drives: 2008 Yaris Sedan Join Date: Oct 2008 Location: Edmonton Posts: 393	^ by who? fujita? we're not running big displacement or forced induction motors here..

11-05-2008, 10:49 AM	#13
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	so...does that mean because i have a small car i cant make more than 1 hp with an intake? not to offend...i take more pride in my car than ebay parts...always have...always will. to each his own though.

11-05-2008, 01:58 PM	#14
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	I have heard and seen the Fujita intake on a sedan and it looked and sounded wonderful. Don't buy this Ebay thing. It is garbage.

11-05-2008, 04:32 PM	#15
Split Drives: 2008 Yaris Sedan Join Date: Oct 2008 Location: Edmonton Posts: 393	how do you know the ebay intake is garbage? have you ever owned one? Seem to me Midon is the one in this thread that has every used one, and he says its good.

11-05-2008, 04:47 PM	#16
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	i have owned some and every time i was dissapointed, they start to rust after a while filters are crap, their silicon hoses if applicable suck, they are all the same. you dont see track cars built with ebay parts do you? like i said before to each his own, but an ebay part is not considered a mod to me, more like "hey i was too lazy to save and get the good part" excuse.

11-05-2008, 07:04 PM	#17
kustom play pink wheels are cool View User's Garage Drives: 07 liftback Join Date: Oct 2008 Location: Phoenix Posts: 1,407	i have an ebay one and for the last year have had zero problems maybe some of you are just getting into cars now, but back in the day when you wanted a CAI or ram intake you had to build it yourself

11-05-2008, 07:23 PM	#18
PHXDEMON View User's Garage Drives: 2007 Red Liftback Join Date: Oct 2008 Location: Phoenix, AZ Posts: 885	Don't throw crappy parts on your car.