|
05-09-2011, 03:07 PM | #1 |
Drives: '08 LB MT Bayou Join Date: Oct 2008
Location: Colorado
Posts: 1,671
|
UltraGauge and DFCO - What value?
To those of you with an UltraGauge - what value did you enter for the Injector Cutoff (DFCO)? Did anyone do the other calibrations like travelling between mile markers to set the distance travelled?
|
06-09-2011, 04:17 PM | #2 |
Drives: 07 yaris 3 door manual Join Date: Jun 2011
Location: central ohio
Posts: 5
|
I've been using an ultra-gauge for about 6 months now.
The only calibration I performed is to make sure I the "fuel used" is accurate -- when I first started using the UG I was pleasantly surprised to see I was easily getting ~46 mpg but it wasn't accurate! My multiplier is somewhere between 1.07 and 1.09, I don't remember specifically. I keep tabs on it and adjust every couple fill-ups to make sure it is accurate, and I now get 48+ mpg legit. I haven't done the distance calibration for lack of a accurate, safe place to do it... I really really like my UG and don't understand why all the talk is still about scan guage -- UG is just as useful, for a greatly reduced cost. If you have any other tips for setting it up, let me know... so far I've been using the "don't have time" excuse. |
|
|