|
05-04-2007, 08:32 AM | #1 |
Drives: 07 Yaris HB Join Date: Apr 2007
Location: Toronto Ontario Canada
Posts: 309
|
turbo question
i was curious to know how much everyone spent on their turbo or how much it would cost
|
05-04-2007, 09:11 AM | #2 |
37HSSV
|
Just remember that cost = quality in this case, you could spend 3 grand and get a decen turbo kit or spend 4 grand plus and you can get a great turbo kit with many extras...Look up ZPI, do a search, or wait for TurboYaris to post, hes our custom Turbo pioneer. www.ZPIracing.net
Also look into Blitz Superchargers, if your keeping an open mind on what you want.
__________________
07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance. |
05-04-2007, 02:26 PM | #3 |
time to chime in i guess hahaha. I will be talking to kenny this weekend at carlisle but their intentions were to release their turbo kit in the 3k range. You will also need an upgraded clutch which they do offer as well. I'm not sure what kind of extras sabretooth thinks he will get as well, but the zpi kit comes with everything you need to bolt up and go aside from like i mentioned the clutch. The turbo kit will come with injectors a tuned emanage intercooler piping intercooler and exhaust manifold and turbo as well as blow off valve and wastegate. The only thing you may need after that is a midpipe I'm not sure about the downpipe connection to the stock pipe. But you don't want a turbo car with a 1" exhaust anyways.
so all told figure 3500 for the turbo kit maybe not sure what ZPI will come out with + 400 for the clutch+ the cost of an exhaust= total cost a little over 4k |
|
05-04-2007, 05:09 PM | #4 |
and thats if you install it all yourself
|
|
05-04-2007, 06:51 PM | #5 |
how big of an exhaust is necessary
|
|
05-04-2007, 07:07 PM | #6 |
Banned
|
i'd imagine a 2" would definitely help the zpi kit?
|
05-04-2007, 07:16 PM | #7 |
nice so i wont have to change my exhaust?!! SWEEET
so since i have to upgrade my clutch, i guess i should wait on installing my flywheel too.. edit: i already changed my exhaust to 2" |
|
05-04-2007, 08:41 PM | #8 |
for the power levels 2" is probably fine, I believe that was the size ZPI was eventually going to go with for their exhaust. Mine is 2.5". and yes i would wait and do your clutch and flywheel at the same time.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TURBO DIY... | forpinks | Forced Induction Forum | 33 | 09-06-2007 02:03 AM |
Toyota Vios Turbo | elsteverino889 | Forced Induction Forum | 4 | 05-03-2007 11:54 AM |
ZPI to produce yaris turbo kit and exhaust | turboyaris | Forced Induction Forum | 30 | 04-04-2007 02:10 PM |
NCP 91 RS 1500 TRD Turbo ????? | ramishrrr | General Yaris / Vitz Discussion | 3 | 01-15-2007 04:51 PM |
Vitz Rs turbo vs U.S. Yaris add turbo? | weaponrcamry | Performance Modifications | 18 | 08-09-2006 08:45 PM |