Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > In Car Entertainment + Electronics (audio / video / alarm)
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 11-17-2009, 09:55 PM   #1
WolfWings
 
WolfWings's Avatar
 
Drives: Silver 2007 3Dr - Gryph
Join Date: Jul 2007
Location: Kansas City, MO, USA
Posts: 310
Cruise Control Transplant 2009->2007 LB

Okay... everything swapped over aside from needing to cut a hole for the stalk. This is a factory cruise-control stalk on a USDM Liftback Yaris, sticks out on the lower-right towards the center console.

Is there two different spiral cable models? I'm asking as my socket had three pins and I swapped the ground/stalk cable from the 2009 model as well but I didn't have the tools or patience to unbolt the steering wheel and verify that.

Also, swapped the clutch bolt over, but no wire to plug that into. What pins on where do I need to route that switch to? And what's the connector part number, if it's available as a seperate part?
__________________
WolfWings is offline   Reply With Quote
Old 11-17-2009, 10:55 PM   #2
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Take a look at this thread:

You need to run the wire from the ECM to the stalk connector and run the two from the clutch switch to the under hood fuse panel.

http://www.yarisworld.com/forums/sho...ghlight=cruise
CTScott is offline   Reply With Quote
Old 11-18-2009, 12:31 AM   #3
WolfWings
 
WolfWings's Avatar
 
Drives: Silver 2007 3Dr - Gryph
Join Date: Jul 2007
Location: Kansas City, MO, USA
Posts: 310
Yeah, I guess what I was wondering was is there a part number for the connector the MT clutch switch uses, so I can keep things plug-together instead of wire-splicing?

Also, regarding the steering-wheel to ECM linkage, do I need to replace the actual 'spiral cable assy' (84306-22010) with another part? If so, what's that part number?

I replaced the 'wire sub-assy, horn button' (45107-52010) with the Y-cable from the 2009 model that included the plug for the cruise-control stalk in addition to the 'clip on' ground wire to the horn/airbag module. The 'spiral cable' socket under the airbag has only 3 pins present, all of which match the three wires from the Y-cable I'm using now from the 2009 Yaris.
__________________
WolfWings is offline   Reply With Quote
Old 11-18-2009, 07:52 AM   #4
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
Quote:
Originally Posted by WolfWings View Post
Yeah, I guess what I was wondering was is there a part number for the connector the MT clutch switch uses, so I can keep things plug-together instead of wire-splicing?

Also, regarding the steering-wheel to ECM linkage, do I need to replace the actual 'spiral cable assy' (84306-22010) with another part? If so, what's that part number?

I replaced the 'wire sub-assy, horn button' (45107-52010) with the Y-cable from the 2009 model that included the plug for the cruise-control stalk in addition to the 'clip on' ground wire to the horn/airbag module. The 'spiral cable' socket under the airbag has only 3 pins present, all of which match the three wires from the Y-cable I'm using now from the 2009 Yaris.
The spiral cable is the same for 06-09 cars, so you don't need to change it. The three wires are there (cruise, cruise ground, and horn), you just need to add the pins to connector D3 on the steering column. The pins are part number: 82998-12870

The clutch switch connector (A29) is part number: 90980-10906. The pins for it are: 82998-24380
CTScott is offline   Reply With Quote
Old 11-18-2009, 08:11 AM   #5
WolfWings
 
WolfWings's Avatar
 
Drives: Silver 2007 3Dr - Gryph
Join Date: Jul 2007
Location: Kansas City, MO, USA
Posts: 310
Thanks very much!
__________________
WolfWings is offline   Reply With Quote
Old 11-21-2009, 02:38 PM   #6
WolfWings
 
WolfWings's Avatar
 
Drives: Silver 2007 3Dr - Gryph
Join Date: Jul 2007
Location: Kansas City, MO, USA
Posts: 310
They couldn't find/order 82998-24380, is there any chance that part number changed?

The connector and other pins were spot on, but the closest part number they could find/order (24360) is utterly wrong for the connector so they didn't charge me for those.
__________________
WolfWings is offline   Reply With Quote
Old 11-21-2009, 04:47 PM   #7
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
There's an alternate pin shown - Part number: 82998-12340
CTScott is offline   Reply With Quote
Old 11-29-2009, 01:13 AM   #8
WolfWings
 
WolfWings's Avatar
 
Drives: Silver 2007 3Dr - Gryph
Join Date: Jul 2007
Location: Kansas City, MO, USA
Posts: 310
Quote:
Originally Posted by CTScott View Post
There's an alternate pin shown - Part number: 82998-12340
Thanks much, that part number worked!
__________________
WolfWings is offline   Reply With Quote
Reply

Tags
2007 lb, 2009 lb, cruise control

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag CTScott DIY / Maintenance / Service 307 04-04-2023 03:43 AM
Cruise control install 2009 Yaris 3 door PeteZNY DIY / Maintenance / Service 124 09-25-2021 07:30 PM
Cruise Control - Again! CB900F2 DIY / Maintenance / Service 47 06-17-2010 06:29 PM
Cruise control vs MPG YarisOwnersDad Fuel Economy Forum 15 05-29-2009 03:55 PM
Retro fit Cruise Control into a 2009 Yaris hatchback 42ezra Performance Modifications 1 05-02-2009 11:04 PM


All times are GMT -4. The time now is 05:35 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.